Using folded open-loop ring resonator to design a common-mode suppression and frequency adjustable balun-bandpass filter

C.-M Chen, Shoou-Jinn Chang, J.-C Zheng, J.-C Liou, C.-F Yang

研究成果: 报告类型書籍

2 引文 (Scopus)

摘要

A compact and simple balun-bandpass filter was investigated by using a pair of half-wavelength open-loop ring resonators (OLRRs) and two microstrip lines. The balun-bandpass filter could be designed easily with a different center frequency by changing the path length of OLLRRs. The design methodology was adopted based on EM simulation to obtain these optimally designed parameters of the OLRRs, and microstrip lines and the filters were fabricated on FR4 substrate. The filters with the frequencies of 2.6 GHz and 5.2 GHz were designed to prove the characteristic of frequency adjustable and they were fabricated with the properties of wide bandwidth and low insertion loss. The balun-bandpass filters presented an excellent inband balanced performance with common-mode rejection ratio over than 40 dB and 34 dB in the passbands of 2.6 GHz and 5.2 GHz, respectively. Good correlation was seen between simulation and measurement, and the result showed that first run pass had been achieved in the majority of our design.
原文英語
頁數7
31
出版狀態已發佈 - 一月 1 2016

指紋

Bandpass filters
Resonators
Microstrip lines
Insertion losses
Bandwidth
Wavelength
Substrates

引用此文

Using folded open-loop ring resonator to design a common-mode suppression and frequency adjustable balun-bandpass filter. / Chen, C.-M; Chang, Shoou-Jinn; Zheng, J.-C; Liou, J.-C; Yang, C.-F.

2016. 7 p.

研究成果: 报告类型書籍

@book{4c134c88370f4afaa1342f3a51a1927b,
title = "Using folded open-loop ring resonator to design a common-mode suppression and frequency adjustable balun-bandpass filter",
abstract = "A compact and simple balun-bandpass filter was investigated by using a pair of half-wavelength open-loop ring resonators (OLRRs) and two microstrip lines. The balun-bandpass filter could be designed easily with a different center frequency by changing the path length of OLLRRs. The design methodology was adopted based on EM simulation to obtain these optimally designed parameters of the OLRRs, and microstrip lines and the filters were fabricated on FR4 substrate. The filters with the frequencies of 2.6 GHz and 5.2 GHz were designed to prove the characteristic of frequency adjustable and they were fabricated with the properties of wide bandwidth and low insertion loss. The balun-bandpass filters presented an excellent inband balanced performance with common-mode rejection ratio over than 40 dB and 34 dB in the passbands of 2.6 GHz and 5.2 GHz, respectively. Good correlation was seen between simulation and measurement, and the result showed that first run pass had been achieved in the majority of our design.",
author = "C.-M Chen and Shoou-Jinn Chang and J.-C Zheng and J.-C Liou and C.-F Yang",
year = "2016",
month = "1",
day = "1",
language = "English",
volume = "31",

}

TY - BOOK

T1 - Using folded open-loop ring resonator to design a common-mode suppression and frequency adjustable balun-bandpass filter

AU - Chen, C.-M

AU - Chang, Shoou-Jinn

AU - Zheng, J.-C

AU - Liou, J.-C

AU - Yang, C.-F

PY - 2016/1/1

Y1 - 2016/1/1

N2 - A compact and simple balun-bandpass filter was investigated by using a pair of half-wavelength open-loop ring resonators (OLRRs) and two microstrip lines. The balun-bandpass filter could be designed easily with a different center frequency by changing the path length of OLLRRs. The design methodology was adopted based on EM simulation to obtain these optimally designed parameters of the OLRRs, and microstrip lines and the filters were fabricated on FR4 substrate. The filters with the frequencies of 2.6 GHz and 5.2 GHz were designed to prove the characteristic of frequency adjustable and they were fabricated with the properties of wide bandwidth and low insertion loss. The balun-bandpass filters presented an excellent inband balanced performance with common-mode rejection ratio over than 40 dB and 34 dB in the passbands of 2.6 GHz and 5.2 GHz, respectively. Good correlation was seen between simulation and measurement, and the result showed that first run pass had been achieved in the majority of our design.

AB - A compact and simple balun-bandpass filter was investigated by using a pair of half-wavelength open-loop ring resonators (OLRRs) and two microstrip lines. The balun-bandpass filter could be designed easily with a different center frequency by changing the path length of OLLRRs. The design methodology was adopted based on EM simulation to obtain these optimally designed parameters of the OLRRs, and microstrip lines and the filters were fabricated on FR4 substrate. The filters with the frequencies of 2.6 GHz and 5.2 GHz were designed to prove the characteristic of frequency adjustable and they were fabricated with the properties of wide bandwidth and low insertion loss. The balun-bandpass filters presented an excellent inband balanced performance with common-mode rejection ratio over than 40 dB and 34 dB in the passbands of 2.6 GHz and 5.2 GHz, respectively. Good correlation was seen between simulation and measurement, and the result showed that first run pass had been achieved in the majority of our design.

M3 - Book

VL - 31

BT - Using folded open-loop ring resonator to design a common-mode suppression and frequency adjustable balun-bandpass filter

ER -