The influence of operating parameters on the drug release and anti-bacterial performances of alginate wound dressings prepared by three-dimensional plotting

Chih Wei Peng, Hsin Yi Lin, Hsin Wei Wang, Wei Wen Wu

研究成果: 雜誌貢獻文章

20 引文 斯高帕斯(Scopus)

摘要

Three-dimensional plotting was used to manufacture fibrous alginate hydrogel wound dressings. Samples manufactured using varied operating parameters (increased air pressure, nozzle diameter, and layer increment or decreased calcium concentration, alginate concentration, and speed of the nozzle in the x and y directions) were compared to the control samples. The changes in the fiber size, porosity, tensile properties, degradation, swelling ratio, tetracycline release efficacy, water vapor transmission rate (WVTR), and bacterial inhibition potential due to alterations of the operating parameters were measured. The samples manufactured using altered operating parameters had larger fiber sizes and were less porous than the controls (p <0.05). A significantly higher Young's modulus, a larger ultimate tensile strength, less degradation, and lower swelling ratios were also found among some of the altered samples (p <0.05). The tetracycline release efficacies and bacterial inhibition potentials of the altered samples were not found to be significantly different from those of the controls. The WVTRs of most samples were slightly lower than those of common commercial dressings. When compared to films, the fibrous samples were able to absorb liquid faster and were less stiff, allowing for better conformation to the contours of the wounds. The fibrous samples also provided more sustained tetracycline release.

原文英語
頁(從 - 到)2491-2500
頁數10
期刊Materials Science and Engineering C
32
發行號8
DOIs
出版狀態已發佈 - 十二月 1 2012

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanical Engineering
  • Mechanics of Materials

指紋 深入研究「The influence of operating parameters on the drug release and anti-bacterial performances of alginate wound dressings prepared by three-dimensional plotting」主題。共同形成了獨特的指紋。

  • 引用此