Surface modification of plastic thin film using anodic aluminum oxide template for nano imprint

Chih Wei Wu, Jeou Long Lee, Yi Lin, Yung Kang Shen

研究成果: 書貢獻/報告類型會議貢獻

摘要

Nano-porous anodic alumina oxide (AAO) templates are fabricated by anodizing method. The average diameter of nano-porous anodic alumina is 200 nm. The molded plastic thin film (Polycarbonate, PC) with nano-structure is fabricated by AAO as mold insert for nanoimprint. This research discusses the surface property of molded plastic thin film for different processing parameters (embossing temperature, embossing pressure, embossing time, de-molding temperature) on nanoimprint. The original contact angle of PC material without nano-structrue is about 78.2°. The contact angle of molded PC with nano-structrue is about 115.5°. The contact angle of molded plastic film (PC) with nano-structure is larger than that without nano-structure. The hydrophilic property of PC material has changed to hydrophobic property. A significant advantage of the fabrication process employed in this work is that it can create the good surface modification of plastic thin film.
原文英語
主出版物標題Key Engineering Materials
頁面711-716
頁數6
443
DOIs
出版狀態已發佈 - 2010
事件9th Asia-Pacific Conference on Materials Processing, APCMP2010 - Sydney, NSW, 澳大利亚
持續時間: 六月 7 2010六月 10 2010

出版系列

名字Key Engineering Materials
443
ISSN(列印)10139826

其他

其他9th Asia-Pacific Conference on Materials Processing, APCMP2010
國家澳大利亚
城市Sydney, NSW
期間6/7/106/10/10

指紋

polycarbonate
Plastic films
Aluminum Oxide
Polycarbonates
Surface treatment
Contact angle
Aluminum
Thin films
Oxides
Alumina
Anodic oxidation
Molding
Surface properties
Fabrication
Processing

ASJC Scopus subject areas

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

引用此文

Wu, C. W., Lee, J. L., Lin, Y., & Shen, Y. K. (2010). Surface modification of plastic thin film using anodic aluminum oxide template for nano imprint. 於 Key Engineering Materials (卷 443, 頁 711-716). (Key Engineering Materials; 卷 443). https://doi.org/10.4028/www.scientific.net/KEM.443.711

Surface modification of plastic thin film using anodic aluminum oxide template for nano imprint. / Wu, Chih Wei; Lee, Jeou Long; Lin, Yi; Shen, Yung Kang.

Key Engineering Materials. 卷 443 2010. p. 711-716 (Key Engineering Materials; 卷 443).

研究成果: 書貢獻/報告類型會議貢獻

Wu, CW, Lee, JL, Lin, Y & Shen, YK 2010, Surface modification of plastic thin film using anodic aluminum oxide template for nano imprint. 於 Key Engineering Materials. 卷 443, Key Engineering Materials, 卷 443, 頁 711-716, 9th Asia-Pacific Conference on Materials Processing, APCMP2010, Sydney, NSW, 澳大利亚, 6/7/10. https://doi.org/10.4028/www.scientific.net/KEM.443.711
Wu CW, Lee JL, Lin Y, Shen YK. Surface modification of plastic thin film using anodic aluminum oxide template for nano imprint. 於 Key Engineering Materials. 卷 443. 2010. p. 711-716. (Key Engineering Materials). https://doi.org/10.4028/www.scientific.net/KEM.443.711
Wu, Chih Wei ; Lee, Jeou Long ; Lin, Yi ; Shen, Yung Kang. / Surface modification of plastic thin film using anodic aluminum oxide template for nano imprint. Key Engineering Materials. 卷 443 2010. 頁 711-716 (Key Engineering Materials).
@inproceedings{36dc7c50d7df46a79c3a497c9553136d,
title = "Surface modification of plastic thin film using anodic aluminum oxide template for nano imprint",
abstract = "Nano-porous anodic alumina oxide (AAO) templates are fabricated by anodizing method. The average diameter of nano-porous anodic alumina is 200 nm. The molded plastic thin film (Polycarbonate, PC) with nano-structure is fabricated by AAO as mold insert for nanoimprint. This research discusses the surface property of molded plastic thin film for different processing parameters (embossing temperature, embossing pressure, embossing time, de-molding temperature) on nanoimprint. The original contact angle of PC material without nano-structrue is about 78.2°. The contact angle of molded PC with nano-structrue is about 115.5°. The contact angle of molded plastic film (PC) with nano-structure is larger than that without nano-structure. The hydrophilic property of PC material has changed to hydrophobic property. A significant advantage of the fabrication process employed in this work is that it can create the good surface modification of plastic thin film.",
keywords = "Anodic aluminum oxide, Contact angle, Surface modification",
author = "Wu, {Chih Wei} and Lee, {Jeou Long} and Yi Lin and Shen, {Yung Kang}",
year = "2010",
doi = "10.4028/www.scientific.net/KEM.443.711",
language = "English",
isbn = "0878492674",
volume = "443",
series = "Key Engineering Materials",
pages = "711--716",
booktitle = "Key Engineering Materials",

}

TY - GEN

T1 - Surface modification of plastic thin film using anodic aluminum oxide template for nano imprint

AU - Wu, Chih Wei

AU - Lee, Jeou Long

AU - Lin, Yi

AU - Shen, Yung Kang

PY - 2010

Y1 - 2010

N2 - Nano-porous anodic alumina oxide (AAO) templates are fabricated by anodizing method. The average diameter of nano-porous anodic alumina is 200 nm. The molded plastic thin film (Polycarbonate, PC) with nano-structure is fabricated by AAO as mold insert for nanoimprint. This research discusses the surface property of molded plastic thin film for different processing parameters (embossing temperature, embossing pressure, embossing time, de-molding temperature) on nanoimprint. The original contact angle of PC material without nano-structrue is about 78.2°. The contact angle of molded PC with nano-structrue is about 115.5°. The contact angle of molded plastic film (PC) with nano-structure is larger than that without nano-structure. The hydrophilic property of PC material has changed to hydrophobic property. A significant advantage of the fabrication process employed in this work is that it can create the good surface modification of plastic thin film.

AB - Nano-porous anodic alumina oxide (AAO) templates are fabricated by anodizing method. The average diameter of nano-porous anodic alumina is 200 nm. The molded plastic thin film (Polycarbonate, PC) with nano-structure is fabricated by AAO as mold insert for nanoimprint. This research discusses the surface property of molded plastic thin film for different processing parameters (embossing temperature, embossing pressure, embossing time, de-molding temperature) on nanoimprint. The original contact angle of PC material without nano-structrue is about 78.2°. The contact angle of molded PC with nano-structrue is about 115.5°. The contact angle of molded plastic film (PC) with nano-structure is larger than that without nano-structure. The hydrophilic property of PC material has changed to hydrophobic property. A significant advantage of the fabrication process employed in this work is that it can create the good surface modification of plastic thin film.

KW - Anodic aluminum oxide

KW - Contact angle

KW - Surface modification

UR - http://www.scopus.com/inward/record.url?scp=77955464049&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=77955464049&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/KEM.443.711

DO - 10.4028/www.scientific.net/KEM.443.711

M3 - Conference contribution

AN - SCOPUS:77955464049

SN - 0878492674

SN - 9780878492671

VL - 443

T3 - Key Engineering Materials

SP - 711

EP - 716

BT - Key Engineering Materials

ER -