Monolithic of SOI wafer waveguide and InP-laser with DVS-BCB coating and bonding

Jian Chiun Liou, Cheng Fu Yang, Yi Chen Lin, Chia Hsin Chao

研究成果: 雜誌貢獻文章

1 引文 (Scopus)

摘要

Si photonic is an optical information processing technology, including lasers, optical modulators, waveguide and a photodetector, and the light signal is performed by a basic photonic systems. In silicon microelectronics world, hundreds of millions of pieces of single components are integrated into a single platform to "parallel manufacturing" approach at the same time, the current optical transmission systems, the main technology is based on an independent element "series mode" manufacturing. Bonding technology is becoming realized comprising laser, an optical modulator, a waveguide and a photodetector system integration. Several conventional bonding methods have been developed a practical method. Wherein, the silicon substrate and the III-V group bonding, does not need to atomically smooth surface engagement, and the conventional bonding method is comparison with great flexibility, allowing the binding material or structure of the highest quality. Silicon has a high thermal conductivity and low light absorption, and the properties of these two substances silicon photonic application is very advantageous. Relatively low cost and high quality SOI wafers, making them an ideal platform to create a CMOS-compatible planar waveguide circuits. In this research, we focus on BCB coating, bonding, and adhesion observation for monolithic SOI wafer waveguide and InP-laser. The IV (Current-voltage) curve measured under the needle was found operating under current of approximately 8 mA at 1.5 V, LI (Optical power-Current) measurement results found at 36 mA operating maximum optical power of about 1.2 mW. This method owns the advantages of simple fabrication process, great performance and high adhesion efficient between BCB layer and Si waveguide.
原文英語
文章編號9974
頁(從 - 到)44-50
頁數7
期刊Microelectronic Engineering
148
DOIs
出版狀態已發佈 - 十二月 1 2015
對外發佈Yes

指紋

SOI (semiconductors)
Silicon
Waveguides
wafers
waveguides
coatings
Coatings
Lasers
Photonics
Light modulators
lasers
silicon
photonics
Photodetectors
photometers
modulators
adhesion
Adhesion
manufacturing
platforms

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Atomic and Molecular Physics, and Optics
  • Condensed Matter Physics
  • Surfaces, Coatings and Films
  • Electrical and Electronic Engineering

引用此文

Monolithic of SOI wafer waveguide and InP-laser with DVS-BCB coating and bonding. / Liou, Jian Chiun; Yang, Cheng Fu; Lin, Yi Chen; Chao, Chia Hsin.

於: Microelectronic Engineering, 卷 148, 9974, 01.12.2015, p. 44-50.

研究成果: 雜誌貢獻文章

Liou, Jian Chiun ; Yang, Cheng Fu ; Lin, Yi Chen ; Chao, Chia Hsin. / Monolithic of SOI wafer waveguide and InP-laser with DVS-BCB coating and bonding. 於: Microelectronic Engineering. 2015 ; 卷 148. 頁 44-50.
@article{4d5c128d700f416d8de93a85949558cb,
title = "Monolithic of SOI wafer waveguide and InP-laser with DVS-BCB coating and bonding",
abstract = "Si photonic is an optical information processing technology, including lasers, optical modulators, waveguide and a photodetector, and the light signal is performed by a basic photonic systems. In silicon microelectronics world, hundreds of millions of pieces of single components are integrated into a single platform to {"}parallel manufacturing{"} approach at the same time, the current optical transmission systems, the main technology is based on an independent element {"}series mode{"} manufacturing. Bonding technology is becoming realized comprising laser, an optical modulator, a waveguide and a photodetector system integration. Several conventional bonding methods have been developed a practical method. Wherein, the silicon substrate and the III-V group bonding, does not need to atomically smooth surface engagement, and the conventional bonding method is comparison with great flexibility, allowing the binding material or structure of the highest quality. Silicon has a high thermal conductivity and low light absorption, and the properties of these two substances silicon photonic application is very advantageous. Relatively low cost and high quality SOI wafers, making them an ideal platform to create a CMOS-compatible planar waveguide circuits. In this research, we focus on BCB coating, bonding, and adhesion observation for monolithic SOI wafer waveguide and InP-laser. The IV (Current-voltage) curve measured under the needle was found operating under current of approximately 8 mA at 1.5 V, LI (Optical power-Current) measurement results found at 36 mA operating maximum optical power of about 1.2 mW. This method owns the advantages of simple fabrication process, great performance and high adhesion efficient between BCB layer and Si waveguide.",
keywords = "BCB coating, InP-laser, Silicon, Waveguide",
author = "Liou, {Jian Chiun} and Yang, {Cheng Fu} and Lin, {Yi Chen} and Chao, {Chia Hsin}",
year = "2015",
month = "12",
day = "1",
doi = "10.1016/j.mee.2015.07.010",
language = "English",
volume = "148",
pages = "44--50",
journal = "Microelectronic Engineering",
issn = "0167-9317",
publisher = "Elsevier",

}

TY - JOUR

T1 - Monolithic of SOI wafer waveguide and InP-laser with DVS-BCB coating and bonding

AU - Liou, Jian Chiun

AU - Yang, Cheng Fu

AU - Lin, Yi Chen

AU - Chao, Chia Hsin

PY - 2015/12/1

Y1 - 2015/12/1

N2 - Si photonic is an optical information processing technology, including lasers, optical modulators, waveguide and a photodetector, and the light signal is performed by a basic photonic systems. In silicon microelectronics world, hundreds of millions of pieces of single components are integrated into a single platform to "parallel manufacturing" approach at the same time, the current optical transmission systems, the main technology is based on an independent element "series mode" manufacturing. Bonding technology is becoming realized comprising laser, an optical modulator, a waveguide and a photodetector system integration. Several conventional bonding methods have been developed a practical method. Wherein, the silicon substrate and the III-V group bonding, does not need to atomically smooth surface engagement, and the conventional bonding method is comparison with great flexibility, allowing the binding material or structure of the highest quality. Silicon has a high thermal conductivity and low light absorption, and the properties of these two substances silicon photonic application is very advantageous. Relatively low cost and high quality SOI wafers, making them an ideal platform to create a CMOS-compatible planar waveguide circuits. In this research, we focus on BCB coating, bonding, and adhesion observation for monolithic SOI wafer waveguide and InP-laser. The IV (Current-voltage) curve measured under the needle was found operating under current of approximately 8 mA at 1.5 V, LI (Optical power-Current) measurement results found at 36 mA operating maximum optical power of about 1.2 mW. This method owns the advantages of simple fabrication process, great performance and high adhesion efficient between BCB layer and Si waveguide.

AB - Si photonic is an optical information processing technology, including lasers, optical modulators, waveguide and a photodetector, and the light signal is performed by a basic photonic systems. In silicon microelectronics world, hundreds of millions of pieces of single components are integrated into a single platform to "parallel manufacturing" approach at the same time, the current optical transmission systems, the main technology is based on an independent element "series mode" manufacturing. Bonding technology is becoming realized comprising laser, an optical modulator, a waveguide and a photodetector system integration. Several conventional bonding methods have been developed a practical method. Wherein, the silicon substrate and the III-V group bonding, does not need to atomically smooth surface engagement, and the conventional bonding method is comparison with great flexibility, allowing the binding material or structure of the highest quality. Silicon has a high thermal conductivity and low light absorption, and the properties of these two substances silicon photonic application is very advantageous. Relatively low cost and high quality SOI wafers, making them an ideal platform to create a CMOS-compatible planar waveguide circuits. In this research, we focus on BCB coating, bonding, and adhesion observation for monolithic SOI wafer waveguide and InP-laser. The IV (Current-voltage) curve measured under the needle was found operating under current of approximately 8 mA at 1.5 V, LI (Optical power-Current) measurement results found at 36 mA operating maximum optical power of about 1.2 mW. This method owns the advantages of simple fabrication process, great performance and high adhesion efficient between BCB layer and Si waveguide.

KW - BCB coating

KW - InP-laser

KW - Silicon

KW - Waveguide

UR - http://www.scopus.com/inward/record.url?scp=84940171829&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84940171829&partnerID=8YFLogxK

U2 - 10.1016/j.mee.2015.07.010

DO - 10.1016/j.mee.2015.07.010

M3 - Article

AN - SCOPUS:84940171829

VL - 148

SP - 44

EP - 50

JO - Microelectronic Engineering

JF - Microelectronic Engineering

SN - 0167-9317

M1 - 9974

ER -