Integrating chloride addition and ultrasonic processing with electrocoagulation to remove passivation layers and enhance phosphate removal

Cheng Chun He, Ching Yao Hu, Shang Lien Lo

研究成果: 雜誌貢獻文章

8 引文 斯高帕斯(Scopus)


In this study, the effects of integrating chloride addition and ultrasonication with electrocoagulation (EC) to remove passive layers were investigated. Experimental results were evaluated by conducting an impedance modulus analysis and by considering the amounts of aluminum released. The effect of different operating parameters, such as the phosphate concentration, ultrasonic power, chloride concentration, and the number of cycles on the efficiency of phosphate removal was examined. The results indicated that the integrated ultrasonic and chloride addition process effectively enhanced the energy efficiency and lifespan of plates due to the reduction of the electric impedance. The concentration of released aluminum increased from 150 to 440 mg/L with the increase of ultrasound from 0 to 100 W. After three test cycles, the use of the ultrasonic process and chloride addition with EC enhanced the phosphate removal efficiency. The removal efficiency of the EC process decreased to 30%; however, the removal efficiency of the integrated process increased to 90%. Scanning electron microscope images showed that using ultrasound could successfully remove the passivation layer on the electrode to enhance the phosphate removal efficiency. However, excessive ultrasonic intensity would result in a thicker passivation layer and thus decrease the removal efficiency. It suggests that the coupled use of chloride addition and ultrasonication in the EC process effectively reduced the passivation layer, thereby increasing the energy efficiency while decreasing the impedance modulus and enhancing the concentration of aluminum ions.

頁(從 - 到)148-155
期刊Separation and Purification Technology
出版狀態已發佈 - 八月 7 2018


ASJC Scopus subject areas

  • Analytical Chemistry
  • Filtration and Separation