Hybrid manganese oxide films for supercapacitor application prepared by sol-gel technique

Chin Yi Chen, Sheng Chang Wang, Yue Han Tien, Wen Ta Tsai, Chung Kwei Lin

研究成果: 雜誌貢獻文章同行評審

27 引文 斯高帕斯(Scopus)

摘要

Hybrid films were prepared by adding various concentrations of meso-carbon microbeads (MCMB) during sol-gel processing of manganese oxide films. The heat-treated films were characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD). In addition, electrochemical performance of the MCMB-added Mn-oxide hybrid coatings was evaluated by cyclic voltammetry (CV) and compared with its unadded counterpart. Experimental results showed that Mn-oxide films exhibited a mixture of Mn2O3 and Mn3O4 phases. The higher the heat-treatment temperature, the more Mn2O3 can be observed. The specific capacitance of the unadded Mn-oxide electrodes is 209 F/g. Because the MCMB particles provide more interfacial surface area for electrochemical reactions, a significant improvement can be noticed by adding MCMB in Mn-oxide coatings. The 300 °C heat-treated hybrid Mn-oxide coating with a Mn/MCMB ratio of 10/1 exhibits the highest value of 350 F/g, showing a ~ 170% increase in specific capacitance.
原文英語
頁(從 - 到)1557-1560
頁數4
期刊Thin Solid Films
518
發行號5
DOIs
出版狀態已發佈 - 十二月 31 2009
對外發佈Yes

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Materials Chemistry
  • Metals and Alloys
  • Surfaces, Coatings and Films
  • Surfaces and Interfaces

指紋 深入研究「Hybrid manganese oxide films for supercapacitor application prepared by sol-gel technique」主題。共同形成了獨特的指紋。

引用此