Galvanic current induced by heterogeneous structures on stainless steel wire

Chun Che Shih, Chun Ming Shih, Yea Yang Su, Shing Jong Lin

研究成果: 雜誌貢獻文章

5 引文 (Scopus)

摘要

Galvanic corrosion could be initialized between the heterogeneous structures of an implant and the resulting corrosion products could act as a trigger for thrombosis and inflammation leading to restenosis after deployment of implant inside the artery. Experimental evidence showed that there were significant differences in the electrochemical behaviors among the different grain sizes of an implant. Galvanic current was detected between different grain sizes of 316L stainless steel wires both in vitro and in vivo. Severe corrosion and thrombosis were observed at anodic sites. Results demonstrated that homogeneous structure is the essential requirement for an implant in order to minimize the development of galvanic corrosion and to prevent its aftermath after percutaneous transluminal coronary angioplasty (PTCA).
原文英語
頁(從 - 到)2199-2212
頁數14
期刊Corrosion Science
47
發行號9
DOIs
出版狀態已發佈 - 九月 2005

指紋

Stainless Steel
Induced currents
Stainless steel
Wire
Corrosion

ASJC Scopus subject areas

  • Materials Science(all)
  • Metals and Alloys

引用此文

Galvanic current induced by heterogeneous structures on stainless steel wire. / Shih, Chun Che; Shih, Chun Ming; Su, Yea Yang; Lin, Shing Jong.

於: Corrosion Science, 卷 47, 編號 9, 09.2005, p. 2199-2212.

研究成果: 雜誌貢獻文章

Shih, Chun Che ; Shih, Chun Ming ; Su, Yea Yang ; Lin, Shing Jong. / Galvanic current induced by heterogeneous structures on stainless steel wire. 於: Corrosion Science. 2005 ; 卷 47, 編號 9. 頁 2199-2212.
@article{6e02e1c8bfe94bb48ca99203a117e1bc,
title = "Galvanic current induced by heterogeneous structures on stainless steel wire",
abstract = "Galvanic corrosion could be initialized between the heterogeneous structures of an implant and the resulting corrosion products could act as a trigger for thrombosis and inflammation leading to restenosis after deployment of implant inside the artery. Experimental evidence showed that there were significant differences in the electrochemical behaviors among the different grain sizes of an implant. Galvanic current was detected between different grain sizes of 316L stainless steel wires both in vitro and in vivo. Severe corrosion and thrombosis were observed at anodic sites. Results demonstrated that homogeneous structure is the essential requirement for an implant in order to minimize the development of galvanic corrosion and to prevent its aftermath after percutaneous transluminal coronary angioplasty (PTCA).",
keywords = "316L stainless steel wire, Galvanic corrosion, Grain sizes",
author = "Shih, {Chun Che} and Shih, {Chun Ming} and Su, {Yea Yang} and Lin, {Shing Jong}",
year = "2005",
month = "9",
doi = "10.1016/j.corsci.2004.09.017",
language = "English",
volume = "47",
pages = "2199--2212",
journal = "Corrosion Science",
issn = "0010-938X",
publisher = "Elsevier Limited",
number = "9",

}

TY - JOUR

T1 - Galvanic current induced by heterogeneous structures on stainless steel wire

AU - Shih, Chun Che

AU - Shih, Chun Ming

AU - Su, Yea Yang

AU - Lin, Shing Jong

PY - 2005/9

Y1 - 2005/9

N2 - Galvanic corrosion could be initialized between the heterogeneous structures of an implant and the resulting corrosion products could act as a trigger for thrombosis and inflammation leading to restenosis after deployment of implant inside the artery. Experimental evidence showed that there were significant differences in the electrochemical behaviors among the different grain sizes of an implant. Galvanic current was detected between different grain sizes of 316L stainless steel wires both in vitro and in vivo. Severe corrosion and thrombosis were observed at anodic sites. Results demonstrated that homogeneous structure is the essential requirement for an implant in order to minimize the development of galvanic corrosion and to prevent its aftermath after percutaneous transluminal coronary angioplasty (PTCA).

AB - Galvanic corrosion could be initialized between the heterogeneous structures of an implant and the resulting corrosion products could act as a trigger for thrombosis and inflammation leading to restenosis after deployment of implant inside the artery. Experimental evidence showed that there were significant differences in the electrochemical behaviors among the different grain sizes of an implant. Galvanic current was detected between different grain sizes of 316L stainless steel wires both in vitro and in vivo. Severe corrosion and thrombosis were observed at anodic sites. Results demonstrated that homogeneous structure is the essential requirement for an implant in order to minimize the development of galvanic corrosion and to prevent its aftermath after percutaneous transluminal coronary angioplasty (PTCA).

KW - 316L stainless steel wire

KW - Galvanic corrosion

KW - Grain sizes

UR - http://www.scopus.com/inward/record.url?scp=22244459180&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=22244459180&partnerID=8YFLogxK

U2 - 10.1016/j.corsci.2004.09.017

DO - 10.1016/j.corsci.2004.09.017

M3 - Article

AN - SCOPUS:22244459180

VL - 47

SP - 2199

EP - 2212

JO - Corrosion Science

JF - Corrosion Science

SN - 0010-938X

IS - 9

ER -