Dynamic characterization of dental implant osseointegration

Bin Xun Hsieh, Trinh Minh Cong, Chen-Sung Chen, Min Chun Pan

研究成果: 書貢獻/報告類型會議貢獻

摘要

This paper presents how the response frequencies of dental implant structure depend on material properties of both interfacial tissue and dental structure during the osseointegration. Firstly, artificial bone block models were used to mimic various dental implant structures (with different vertical heights of alveolar bone and cortical thickness) in clinic. The structural resonance frequencies (RFs) were also measured by a noncontact displacement sensor. The obtained results were compared with corresponding finite element analysis (FEA). Secondly, the designated bone tissues around the implant were investigated through numerical simulation and corresponding measured RFs. A human mandible model was constructed based upon a set of in-vivo dental computerized tomography (CT) images. Both the simulation and experimental results show that with larger vise fixation heights the RFs of dental structure with three cortical thickness (1, 2 and 3mm) range from 6771±4.5 to 7078±17.3 Hz in the mesial-distal (MD) direction, and from 5230±6.3 to 6119±18.0 Hz in the buccal-lingual (BL) direction. Therefore, the same approaches can be used to evaluate healing conditions during the osseointegration stages for the other orientations. Additionally, Using the FEA enables to assess the stiffness of interfacial tissues that influence the RFs of implant structure during the primary stability stage; more precisely the RFs increase gradually to a steady level following bone tissues becoming stiffer. The FEA results indicate that using the RF changes can identify the conditions of osseointegration.
原文英語
主出版物標題BME-HUST 2016 - 3rd International Conference on Biomedical Engineering
發行者Institute of Electrical and Electronics Engineers Inc.
頁面139-145
頁數7
ISBN(電子)9781509010974
DOIs
出版狀態已發佈 - 十二月 12 2016
對外發佈
事件3rd International Conference on Biomedical Engineering, BME-HUST 2016 - Hanoi, 越南
持續時間: 十月 5 2016十月 6 2016

出版系列

名字BME-HUST 2016 - 3rd International Conference on Biomedical Engineering

會議

會議3rd International Conference on Biomedical Engineering, BME-HUST 2016
國家/地區越南
城市Hanoi
期間10/5/1610/6/16

ASJC Scopus subject areas

  • 生物醫學工程

指紋

深入研究「Dynamic characterization of dental implant osseointegration」主題。共同形成了獨特的指紋。

引用此