Development of a method for manufacturing customized nasal mask cushion for CPAP therapy

Ding Yang Hsu, Yih Lin Cheng, Mauo-Ying Bien, Hsin-Chien Lee

研究成果: 雜誌貢獻文章

3 引文 (Scopus)

摘要

A continuous positive airway pressure (CPAP) device is considered one of the most effective treatments for obstructive sleep apnea (OSA). However, many patients receiving this treatment complain of mask discomfort and other issues. Therefore, this study aimed to develop a customized nasal mask cushion to reduce the discomfort associated with conventional masks. First, a 3D face scanner was used to obtain 3D facial data of participants. Second, a model of the face was created by reverse-engineering and then used for the computer-aided design (CAD) of the cushion. Finally, computer numerical control (CNC) was used to manufacture the mold, into which silicone was then injected slowly. A perceived comfort questionnaire was used to compare the customized and conventional cushions. 40 patients were randomly divided into two groups: 20 patients in the control group used a conventional cushion, and the remaining 20 patients used the customized cushion. The customized cushion was found to be superior to the conventional cushion. There are clear differences in the headgear force of the two cushion types (P = 0.001). The customized cushion applied less force to a patient’s face than a conventional cushion. Furthermore, there were obvious differences in the fit of the cushions (P = 0.001). Patients using the customized cushions experienced a better fit than those using the conventional cushions. This study has developed a new method for manufacturing customized cushions with better cushion fit through rapid tooling.
原文英語
頁(從 - 到)657-664
期刊Australasian Physical and Engineering Sciences in Medicine
38
發行號4
DOIs
出版狀態接受/付印 - 十月 13 2015

指紋

Continuous Positive Airway Pressure
Masks
Nose
Reverse engineering
Silicones
Computer aided design
Therapeutics
Computer-Aided Design
Obstructive Sleep Apnea
Fungi
Equipment and Supplies
Control Groups

ASJC Scopus subject areas

  • Biophysics
  • Radiology Nuclear Medicine and imaging

引用此文

Development of a method for manufacturing customized nasal mask cushion for CPAP therapy. / Hsu, Ding Yang; Cheng, Yih Lin; Bien, Mauo-Ying; Lee, Hsin-Chien.

於: Australasian Physical and Engineering Sciences in Medicine, 卷 38, 編號 4, 13.10.2015, p. 657-664.

研究成果: 雜誌貢獻文章

@article{99ab8ac705ee4098bb3881889ce1cac9,
title = "Development of a method for manufacturing customized nasal mask cushion for CPAP therapy",
abstract = "A continuous positive airway pressure (CPAP) device is considered one of the most effective treatments for obstructive sleep apnea (OSA). However, many patients receiving this treatment complain of mask discomfort and other issues. Therefore, this study aimed to develop a customized nasal mask cushion to reduce the discomfort associated with conventional masks. First, a 3D face scanner was used to obtain 3D facial data of participants. Second, a model of the face was created by reverse-engineering and then used for the computer-aided design (CAD) of the cushion. Finally, computer numerical control (CNC) was used to manufacture the mold, into which silicone was then injected slowly. A perceived comfort questionnaire was used to compare the customized and conventional cushions. 40 patients were randomly divided into two groups: 20 patients in the control group used a conventional cushion, and the remaining 20 patients used the customized cushion. The customized cushion was found to be superior to the conventional cushion. There are clear differences in the headgear force of the two cushion types (P = 0.001). The customized cushion applied less force to a patient’s face than a conventional cushion. Furthermore, there were obvious differences in the fit of the cushions (P = 0.001). Patients using the customized cushions experienced a better fit than those using the conventional cushions. This study has developed a new method for manufacturing customized cushions with better cushion fit through rapid tooling.",
keywords = "Computer numerical control (CNC), Continuous positive airway pressure (CPAP), Mask cushion, Rapid tooling",
author = "Hsu, {Ding Yang} and Cheng, {Yih Lin} and Mauo-Ying Bien and Hsin-Chien Lee",
year = "2015",
month = "10",
day = "13",
doi = "10.1007/s13246-015-0383-0",
language = "English",
volume = "38",
pages = "657--664",
journal = "Australasian Physical and Engineering Sciences in Medicine",
issn = "0158-9938",
publisher = "Springer Netherlands",
number = "4",

}

TY - JOUR

T1 - Development of a method for manufacturing customized nasal mask cushion for CPAP therapy

AU - Hsu, Ding Yang

AU - Cheng, Yih Lin

AU - Bien, Mauo-Ying

AU - Lee, Hsin-Chien

PY - 2015/10/13

Y1 - 2015/10/13

N2 - A continuous positive airway pressure (CPAP) device is considered one of the most effective treatments for obstructive sleep apnea (OSA). However, many patients receiving this treatment complain of mask discomfort and other issues. Therefore, this study aimed to develop a customized nasal mask cushion to reduce the discomfort associated with conventional masks. First, a 3D face scanner was used to obtain 3D facial data of participants. Second, a model of the face was created by reverse-engineering and then used for the computer-aided design (CAD) of the cushion. Finally, computer numerical control (CNC) was used to manufacture the mold, into which silicone was then injected slowly. A perceived comfort questionnaire was used to compare the customized and conventional cushions. 40 patients were randomly divided into two groups: 20 patients in the control group used a conventional cushion, and the remaining 20 patients used the customized cushion. The customized cushion was found to be superior to the conventional cushion. There are clear differences in the headgear force of the two cushion types (P = 0.001). The customized cushion applied less force to a patient’s face than a conventional cushion. Furthermore, there were obvious differences in the fit of the cushions (P = 0.001). Patients using the customized cushions experienced a better fit than those using the conventional cushions. This study has developed a new method for manufacturing customized cushions with better cushion fit through rapid tooling.

AB - A continuous positive airway pressure (CPAP) device is considered one of the most effective treatments for obstructive sleep apnea (OSA). However, many patients receiving this treatment complain of mask discomfort and other issues. Therefore, this study aimed to develop a customized nasal mask cushion to reduce the discomfort associated with conventional masks. First, a 3D face scanner was used to obtain 3D facial data of participants. Second, a model of the face was created by reverse-engineering and then used for the computer-aided design (CAD) of the cushion. Finally, computer numerical control (CNC) was used to manufacture the mold, into which silicone was then injected slowly. A perceived comfort questionnaire was used to compare the customized and conventional cushions. 40 patients were randomly divided into two groups: 20 patients in the control group used a conventional cushion, and the remaining 20 patients used the customized cushion. The customized cushion was found to be superior to the conventional cushion. There are clear differences in the headgear force of the two cushion types (P = 0.001). The customized cushion applied less force to a patient’s face than a conventional cushion. Furthermore, there were obvious differences in the fit of the cushions (P = 0.001). Patients using the customized cushions experienced a better fit than those using the conventional cushions. This study has developed a new method for manufacturing customized cushions with better cushion fit through rapid tooling.

KW - Computer numerical control (CNC)

KW - Continuous positive airway pressure (CPAP)

KW - Mask cushion

KW - Rapid tooling

UR - https://www.scopus.com/record/display.uri?eid=2-s2.0-84952975056&origin=resultslist&sort=plf-f&src=s&st1=Development+of+a+method+for+manufacturing+customized+nasal+mask+cushion+for+CPAP+therapy&st2=&sid=25338B2186E89C372C20E45ADEC5CC0E.wsnAw8kcdt7IPYLO0V48gA%3a490&sot=b&sdt=b&sl=103&s=TITLE-ABS-KEY%28Development+of+a+method+for+manufacturing+customized+nasal+mask+cushion+for+CPAP+therapy%29&relpos=0&citeCnt=0&searchTerm=

U2 - 10.1007/s13246-015-0383-0

DO - 10.1007/s13246-015-0383-0

M3 - Article

C2 - 26462680

AN - SCOPUS:84952975056

VL - 38

SP - 657

EP - 664

JO - Australasian Physical and Engineering Sciences in Medicine

JF - Australasian Physical and Engineering Sciences in Medicine

SN - 0158-9938

IS - 4

ER -