Comparisons of metal leachability for various wastes by extraction and leaching methods

E. E. Chang, P. C. Chiang, P. H. Lu, Y. W. Ko

研究成果: 雜誌貢獻文章同行評審

76 引文 斯高帕斯(Scopus)

摘要

The objective of this research was to evaluate three extraction tests, i.e., toxicity characteristic leaching procedures (TCLP), extraction procedure (EP), and American Society for Testing and Materials (ASTM) methods, for their ability to extract metals in Chemical Sludge and incineration bottom ash, in terms of the precision of analytical results. Typical chemical sludges, including the electroplating and dye-stuff sludges, the municipal solid waste incineration bottom ash, the leather debris, and the steel-mill bottom residue containing Cd, Cr, Cu, Pb, and Zn were prepared for the lysimetry test (dynamic testing) to compare with the extraction results. Results show that for bottom residue and dye-stuff sludge, the concentration of metal leached was almost the same between the lysimetry leaching and the TCLP tests. The metal concentration followed the order: TCLP ≈ EP > ASTM. TCLP and EP exhibited almost the same relative standard deviation (RSD) value. Therefore, the results of the TCLP tests for bottom residue and dye-stuff sludge, which have a low metal content and alkalinity, can be used to estimate the metal concentration leached by typical acid rain in Taiwan; whereas the ASTM extraction test may be a better indicator of the lysimetry test.
原文英語
頁(從 - 到)91-99
頁數9
期刊Chemosphere
45
發行號1
DOIs
出版狀態已發佈 - 2001

ASJC Scopus subject areas

  • Environmental Chemistry
  • Environmental Science(all)

指紋 深入研究「Comparisons of metal leachability for various wastes by extraction and leaching methods」主題。共同形成了獨特的指紋。

引用此