Characterization of iron nitride powders formed by mechanical alloying and atmospheric heat treatment techniques

Chung Kwei Lin, Giin Shan Chen, Jium Shyong Chen, Tsung Shune Chin, Pee Yew Lee

研究成果: 雜誌貢獻文章

3 引文 斯高帕斯(Scopus)

摘要

Iron nitrides were manufactured by mechanical alloying of Fe2.33N and Fe powder mixtures at starting compositions of Fe12N2 and Fe16N2 and annealed in air at 200 and 240°C. It was found that the supersaturated nanocrystalline α-Fe solid solution phase was produced after MA, and iron nitrides were formed after heat treatment. The saturation magnetization (σ) of the heat-treated powders is higher than those of the as-milled powders. The σ values for the specimens heat treated at 200°C are higher than those heat treated at 240°C, and the highest value among all of the samples is 218 e.m.u./g which is obtained by annealing of as-milled Fe12N2 powders in air at 200°C for 6 hours. The possible existence of the α"-Fe16N2 phase is responsible for the high saturation magnetization in mechanically alloyed Fe16N2 and Fe12N2 powders.
原文英語
頁(從 - 到)753-760
頁數8
期刊Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an
24
發行號6
出版狀態已發佈 - 十一月 2001
對外發佈Yes

ASJC Scopus subject areas

  • Engineering(all)
  • Engineering (miscellaneous)

指紋 深入研究「Characterization of iron nitride powders formed by mechanical alloying and atmospheric heat treatment techniques」主題。共同形成了獨特的指紋。

  • 引用此