Characterization and modification of nanocrystalline iron oxide powders prepared by an inert gas condensation technique

Chung Kwei Lin, Chien Yie Tsay, Chin Yi Chen, Wei Hsiang Chan, Cherng Yuh Su, Hong Ming Lin

研究成果: 雜誌貢獻文章

摘要

Nanocrystalline iron oxide powders were prepared by an inert gas condensation technique under various oxygen partial pressures. The as-prepared nanocrystalline iron oxide powders were further modified by electroless nickel plating. The as-prepared and modified nanocrystalline powders were characterized by X-ray diffraction, transmission electron microscopy, and synchrotron X-ray absorption techniques. In addition, magnetic properties of the iron oxide nanoparticles before and after electroless nickel plating were evaluated by vibrating sample magnetometer. The experimental results show that the as-prepared nanocrystalline iron oxide powders exhibited a mixture of iron and γ-Fe2O3 phases. TEM observations revealed that oxidation started from the surface of the gas-condensed iron nanoparticles. The amount of iron oxide increased with increasing oxygen partial pressure and was confirmed by synchrotron x-ray absorption examination. A decrease in saturated magnetization and coercivity of the nanocrystalline iron oxide powders was observed after electroless nickel plating.
原文英語
頁(從 - 到)1379-1382
頁數4
期刊Materials Science Forum
561-565
發行號PART 2
出版狀態已發佈 - 2007
對外發佈Yes
事件6th Pacific Rim International Conference on Advanced Materials and Processing, PRICM 6 - Jeju, 大韓民國
持續時間: 十一月 5 2007十一月 9 2007

指紋

Noble Gases
Inert gases
Iron oxides
iron oxides
Powders
rare gases
Condensation
condensation
Nickel plating
Electroless plating
plating
nickel
Synchrotrons
Partial pressure
partial pressure
synchrotrons
Iron
Oxygen
Nanoparticles
Transmission electron microscopy

ASJC Scopus subject areas

  • Materials Science(all)

引用此文

Lin, C. K., Tsay, C. Y., Chen, C. Y., Chan, W. H., Su, C. Y., & Lin, H. M. (2007). Characterization and modification of nanocrystalline iron oxide powders prepared by an inert gas condensation technique. Materials Science Forum, 561-565(PART 2), 1379-1382.

Characterization and modification of nanocrystalline iron oxide powders prepared by an inert gas condensation technique. / Lin, Chung Kwei; Tsay, Chien Yie; Chen, Chin Yi; Chan, Wei Hsiang; Su, Cherng Yuh; Lin, Hong Ming.

於: Materials Science Forum, 卷 561-565, 編號 PART 2, 2007, p. 1379-1382.

研究成果: 雜誌貢獻文章

Lin, CK, Tsay, CY, Chen, CY, Chan, WH, Su, CY & Lin, HM 2007, 'Characterization and modification of nanocrystalline iron oxide powders prepared by an inert gas condensation technique', Materials Science Forum, 卷 561-565, 編號 PART 2, 頁 1379-1382.
Lin, Chung Kwei ; Tsay, Chien Yie ; Chen, Chin Yi ; Chan, Wei Hsiang ; Su, Cherng Yuh ; Lin, Hong Ming. / Characterization and modification of nanocrystalline iron oxide powders prepared by an inert gas condensation technique. 於: Materials Science Forum. 2007 ; 卷 561-565, 編號 PART 2. 頁 1379-1382.
@article{ff2b4f6ba4dd40f781d02cf5ba826ab2,
title = "Characterization and modification of nanocrystalline iron oxide powders prepared by an inert gas condensation technique",
abstract = "Nanocrystalline iron oxide powders were prepared by an inert gas condensation technique under various oxygen partial pressures. The as-prepared nanocrystalline iron oxide powders were further modified by electroless nickel plating. The as-prepared and modified nanocrystalline powders were characterized by X-ray diffraction, transmission electron microscopy, and synchrotron X-ray absorption techniques. In addition, magnetic properties of the iron oxide nanoparticles before and after electroless nickel plating were evaluated by vibrating sample magnetometer. The experimental results show that the as-prepared nanocrystalline iron oxide powders exhibited a mixture of iron and γ-Fe2O3 phases. TEM observations revealed that oxidation started from the surface of the gas-condensed iron nanoparticles. The amount of iron oxide increased with increasing oxygen partial pressure and was confirmed by synchrotron x-ray absorption examination. A decrease in saturated magnetization and coercivity of the nanocrystalline iron oxide powders was observed after electroless nickel plating.",
keywords = "Electroless nickel plating, Gas condensation, Iron oxide nanoparticles, Magnetic properties, Synchrotron X-ray examination",
author = "Lin, {Chung Kwei} and Tsay, {Chien Yie} and Chen, {Chin Yi} and Chan, {Wei Hsiang} and Su, {Cherng Yuh} and Lin, {Hong Ming}",
year = "2007",
language = "English",
volume = "561-565",
pages = "1379--1382",
journal = "Materials Science Forum",
issn = "0255-5476",
publisher = "Trans Tech Publications",
number = "PART 2",

}

TY - JOUR

T1 - Characterization and modification of nanocrystalline iron oxide powders prepared by an inert gas condensation technique

AU - Lin, Chung Kwei

AU - Tsay, Chien Yie

AU - Chen, Chin Yi

AU - Chan, Wei Hsiang

AU - Su, Cherng Yuh

AU - Lin, Hong Ming

PY - 2007

Y1 - 2007

N2 - Nanocrystalline iron oxide powders were prepared by an inert gas condensation technique under various oxygen partial pressures. The as-prepared nanocrystalline iron oxide powders were further modified by electroless nickel plating. The as-prepared and modified nanocrystalline powders were characterized by X-ray diffraction, transmission electron microscopy, and synchrotron X-ray absorption techniques. In addition, magnetic properties of the iron oxide nanoparticles before and after electroless nickel plating were evaluated by vibrating sample magnetometer. The experimental results show that the as-prepared nanocrystalline iron oxide powders exhibited a mixture of iron and γ-Fe2O3 phases. TEM observations revealed that oxidation started from the surface of the gas-condensed iron nanoparticles. The amount of iron oxide increased with increasing oxygen partial pressure and was confirmed by synchrotron x-ray absorption examination. A decrease in saturated magnetization and coercivity of the nanocrystalline iron oxide powders was observed after electroless nickel plating.

AB - Nanocrystalline iron oxide powders were prepared by an inert gas condensation technique under various oxygen partial pressures. The as-prepared nanocrystalline iron oxide powders were further modified by electroless nickel plating. The as-prepared and modified nanocrystalline powders were characterized by X-ray diffraction, transmission electron microscopy, and synchrotron X-ray absorption techniques. In addition, magnetic properties of the iron oxide nanoparticles before and after electroless nickel plating were evaluated by vibrating sample magnetometer. The experimental results show that the as-prepared nanocrystalline iron oxide powders exhibited a mixture of iron and γ-Fe2O3 phases. TEM observations revealed that oxidation started from the surface of the gas-condensed iron nanoparticles. The amount of iron oxide increased with increasing oxygen partial pressure and was confirmed by synchrotron x-ray absorption examination. A decrease in saturated magnetization and coercivity of the nanocrystalline iron oxide powders was observed after electroless nickel plating.

KW - Electroless nickel plating

KW - Gas condensation

KW - Iron oxide nanoparticles

KW - Magnetic properties

KW - Synchrotron X-ray examination

UR - http://www.scopus.com/inward/record.url?scp=38349090522&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=38349090522&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:38349090522

VL - 561-565

SP - 1379

EP - 1382

JO - Materials Science Forum

JF - Materials Science Forum

SN - 0255-5476

IS - PART 2

ER -