Bone defect detection on dental osseointegration using structural mode shape

Y. Sh Hsieh, J. Z. Chen, Ch S. Chen, S. Y. Lee, M. Ch Pan

研究成果: 書貢獻/報告類型會議貢獻

摘要

This study aims to assess clinical bone defects between an implant and jaw bone after dental implantation by examining the mode shape of structures. Different severity of bone defects was evaluated through structure resonant frequencies and their corresponding mode shapes of the implant and jaw bone by using both numerical analysis and experimentation. This study consists of two parts. First, the assumption of two kinds of boundary conditions, bonding and rubbing, was applied to simulate osseointegration in the clinical dentistry and the in-vitro bone defect model, respectively, in finite element analysis. Natural frequencies and their mode shapes of the implant/jaw were computed by the modal analysis. During the harmonic analysis, the response displacements versus frequency of implant in the buccolingual and mesiodistal directions were defined. Secondly, the structural resonant frequencies were measured by a procedure of acoustic excitation and displacement response, and then this result was compared with using the detection of an Osstell mentor. The simulation results show that the structure local mode corresponding high-frequency resonance can be used to examine bone imperfection remarkably. Limited by extremely tiny response displacement, measuring dynamic range of the capacitive displacement sensor, the acoustic excitationdisplacement response measurement can only acquire the structure global mode of the mandible corresponding to low-frequency resonance. Additionally, the Osstell mentor can assess bone defects effectively. Therefore, the above-mentioned simulations and experimental results prove that the local mode is promising to evaluate the defect severity of the dental-implantation osseointegration.
原文英語
主出版物標題ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2012
頁面201-205
頁數5
1
版本PARTS A AND B
DOIs
出版狀態已發佈 - 2012
對外發佈Yes
事件ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2012 - Chicago, IL, 美国
持續時間: 八月 12 2012八月 12 2012

其他

其他ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2012
國家美国
城市Chicago, IL
期間8/12/128/12/12

ASJC Scopus subject areas

  • Modelling and Simulation
  • Mechanical Engineering
  • Computer Science Applications
  • Computer Graphics and Computer-Aided Design

指紋 深入研究「Bone defect detection on dental osseointegration using structural mode shape」主題。共同形成了獨特的指紋。

  • 引用此

    Hsieh, Y. S., Chen, J. Z., Chen, C. S., Lee, S. Y., & Pan, M. C. (2012). Bone defect detection on dental osseointegration using structural mode shape. 於 ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2012 (PARTS A AND B 編輯, 卷 1, 頁 201-205) https://doi.org/10.1115/DETC2012-70508