An intelligent high-speed 3D data registration integrated circuit applied to large array format inkjet printhead

Jian Chiun Liou, Fan Gang Tseng

研究成果: 書貢獻/報告類型會議貢獻

7 引文 斯高帕斯(Scopus)

摘要

A novel architecture of high-selection-speed 3D data registration for inkjet application is proposed in this paper. As the increasing demand on the requirement of printing speed and simplicity of data management, inkjet printheads have been extended in the nozzle numbers from tens to hundreds in the recent years and further to thousands in the future, while intending to maintain data accessing points in the order of 20-40. 3 dimensional data registration scheme to reduce the number of data accessing points as well as the scanning lines for large array inkjet printhead with nozzle number more than 1000. This IC architecture involves three dimension multiplexing with the provision of a gating transistor for each ink firing resistor, whereby current to an ink firing resistor flows only when its associated gating transistor is selected . Three signals, including selection (S), address (A), and power supply (P), will be employed together to activate a nozzle for droplet ejection. The total numbers of data accessing points will be X=3×3√Y +1, all of the jets of the printhead are controlled by 5 input lines with multiplexer data latches and shift registers . The scanning time is reduced up to 30% (the scanning speed is also increased by 3 folds) thanks to the great reduction of the lines for scanning. This device has been designed, fabricated by CMOS 0.35um process, and characterized. Experiment results demonstrated the functionality of the fabricated IC in operation, signal transmission and control more than 1000 nozzles with a 5 pi. ink drop volume.
原文英語
主出版物標題Proceedings of 1st IEEE International Conference on Nano Micro Engineered and Molecular Systems, 1st IEEE-NEMS
頁面368-372
頁數5
DOIs
出版狀態已發佈 - 2006
對外發佈Yes
事件1st IEEE International Conference on Nano Micro Engineered and Molecular Systems, 1st IEEE-NEMS - Zhuhai, 中国
持續時間: 一月 18 2006一月 21 2006

會議

會議1st IEEE International Conference on Nano Micro Engineered and Molecular Systems, 1st IEEE-NEMS
國家中国
城市Zhuhai
期間1/18/061/21/06

ASJC Scopus subject areas

  • Biotechnology
  • Materials Science (miscellaneous)

指紋 深入研究「An intelligent high-speed 3D data registration integrated circuit applied to large array format inkjet printhead」主題。共同形成了獨特的指紋。

  • 引用此

    Liou, J. C., & Tseng, F. G. (2006). An intelligent high-speed 3D data registration integrated circuit applied to large array format inkjet printhead. 於 Proceedings of 1st IEEE International Conference on Nano Micro Engineered and Molecular Systems, 1st IEEE-NEMS (頁 368-372). [4134972] https://doi.org/10.1109/NEMS.2006.334760