A meshless method for analysis of 3D medical parts

Ming Hsiao Lee, Jian Ming Lu, Keng-Liang Ou

研究成果: 書貢獻/報告類型會議貢獻

摘要

A proposed method based on a so-called meshless method is designed to simulate the structural behaviors of 3D medical parts. To do the simulation, the STL (Stereo-Lithography) geometry, which is the main geometry format used in 3D printing and medical models, is adopted to be the analysis model. Moreover, the geometry model of the objects in STL format becomes the only model needed for the simulation. To achieve this, some geometryrelated treatments are required, so some checking processes are designed to handle the analysis model during the analysis. Hence, with the proposed meshless method based on STL geometry, the simulation can be carried out in a simple and straightforward way with less preparation effort for analysis models. A 3D simulation has been conducted to demonstrate the effectiveness and efficiency of this proposed method. Besides, the parts with highly complicated shapes can also be simulated without difficulty.
原文英語
主出版物標題MATEC Web of Conferences
發行者EDP Sciences
42
DOIs
出版狀態已發佈 - 二月 17 2016
事件3rd International Conference on Control, Mechatronics and Automation, ICCMA 2015 - Barcelona, 西班牙
持續時間: 十二月 21 2015十二月 22 2015

其他

其他3rd International Conference on Control, Mechatronics and Automation, ICCMA 2015
國家西班牙
城市Barcelona
期間12/21/1512/22/15

ASJC Scopus subject areas

  • Chemistry(all)
  • Engineering(all)
  • Materials Science(all)

指紋 深入研究「A meshless method for analysis of 3D medical parts」主題。共同形成了獨特的指紋。

  • 引用此

    Lee, M. H., Lu, J. M., & Ou, K-L. (2016). A meshless method for analysis of 3D medical parts. 於 MATEC Web of Conferences (卷 42). [04007] EDP Sciences. https://doi.org/10.1051/matecconf20164204007