A hand rehabilitation computer system using commercial haptic device

Ming Shium Hsieh, Chwen Jen Chen, Ming Dar Tsai

研究成果: 雜誌貢獻文章同行評審

2 引文 斯高帕斯(Scopus)

摘要

This paper describes a PC based hand rehabilitation system equipped with a commercial haptic device. The proposed system uses a 3D hierarchical hand model to describe the transformation between the wrist with any MCP joint, and the transformations between an MCP or PIP joint with a PIP or DIP joint on the same finger. Through this hand model, a 3D hand image with dynamic rotation of any joint can be demonstrated in real-time. The system also uses the 6D input of the haptic device and the accumulation of transformation matrices between the related joints to estimate the rotational angle of the rehabilitated joint. The system can detect the force and the range of joint motion in the active rehabilitation by the estimated angle and the 3D output force of the haptic device. The detected force and the range of motion are then used to control and achieve high efficient passive rehabilitation. A rehabilitation example of the PIP joint of the index finer demonstrates the attachment, set-up of the haptic device to the rehabilitated joint and shows the rehabilitation can be improved by the controlled passive rehabilitation.
原文英語
頁(從 - 到)375-382
頁數8
期刊Biomedical Engineering - Applications, Basis and Communications
19
發行號6
DOIs
出版狀態已發佈 - 十二月 2007

ASJC Scopus subject areas

  • Biophysics
  • Bioengineering

指紋 深入研究「A hand rehabilitation computer system using commercial haptic device」主題。共同形成了獨特的指紋。

引用此