含鈦元素之鐵鋁錳碳基醫用合金研究

研究計畫: B - 校內計畫h - 其他校內計畫

說明

A porous structural oxide film was formed on titanium-niobium alloys (TiNb) by anodic oxidation after cathodic pretreatment.
The effects of titanium hydride compounds on the formation of an oxide film and the structural properties of a TiNb matrix were
investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and nanoindentation.
The XRD spectra showed that composite films containing TiH1.924 were formed by cathodic pretreatment and directly
dissolved after anodic oxidation. Consequently, a thick and porous oxide surface was formed on a TiNb matrix, thereby increasing the
bioactivity of TiNb. Nano-indentation showed that the elastic modulus of TiNb was reduced until it was close to that of bone tissue.
These results showed that TiNb subjected to anodic oxidation after cathodic pretreatment had the potential to promote sufficient load
sharing between the bone and the TiNb implant
狀態已完成
有效的開始/結束日期10/1/109/30/11