如果您對這些純文本內容做了任何改變,很快就會看到。

研究成果 1994 2019

  • 733 引文
  • 16 h-指數
  • 71 文章
  • 23 會議貢獻
篩選
文章
2019
1 引文 (Scopus)

Analysis on characteristics of ZnO surface acoustic wave with and without micro-structures

Huang, H. Y., Chiang, H. J., Wu, C. Z., Lin, Y. & Shen, Y. K., 七月 1 2019, 於 : Micromachines. 10, 7, 434.

研究成果: 雜誌貢獻文章

開啟存取
Zinc oxide
Surface waves
Acoustic waves
Thin films
Microstructure
titanium alloys
Blasting
blasts
Titanium alloys
Cell culture
2017
2 引文 (Scopus)
Cell culture
Aluminum
Osteoblasts
Blasting
Microstructure
3 引文 (Scopus)
Bite Force
Bone
Orthodontics
Bone and Bones
Computer simulation
1 引文 (Scopus)

Rhombic-shaped channel stent with enhanced drug capacity and fatigue life

Hsiao, H. M., Lin, C. H., Shen, Y. K., Chou, T. Y. & Hsu, Y. Y., 十二月 24 2017, 於 : Micromachines. 9, 1, 3.

研究成果: 雜誌貢獻文章

Stents
Fatigue of materials
Struts
Safety factor
Drug delivery
Orthodontics
Biocompatibility
Surface treatment
Physical properties
Water absorption
2016
1 引文 (Scopus)
polycarbonate
Aluminum
Aluminum Oxide
Nanostructures
Thin films
2014

Analysis on surface modification of orthodontic power chain by nanoimprinting process

Cheng, H. C., Lin, W. T., Shen, Y. K. & Wang, Y. H., 五月 1 2014, 於 : Journal of Polymer Engineering. 34, 3, p. 209-217 9 p.

研究成果: 雜誌貢獻文章

Surface treatment
Nanostructures
Discoloration
Beverages
Water
5 引文 (Scopus)

Optimal processing for hydrophobic nanopillar polymer surfaces using nanoporous alumina template

Huang, C. F., Lin, Y., Shen, Y. K. & Fan, Y. M., 六月 30 2014, 於 : Applied Surface Science. 305, p. 419-426 8 p.

研究成果: 雜誌貢獻文章

Plastic films
Aluminum Oxide
Polymers
Alumina
Thin films

Replication of plastic thin film by microfeature mould in large area hot embossing

Yang, H. P., Shen, Y. K. & Lin, Y., 三月 2014, 於 : Plastics, Rubber and Composites. 43, 2, p. 39-45 7 p.

研究成果: 雜誌貢獻文章

Plastic films
Polymethyl Methacrylate
Polymethyl methacrylates
Thin films
Surface roughness
11 引文 (Scopus)
Nanostructures
Plastic films
Alumina
Aluminum
Thin films
1 引文 (Scopus)
Gutta-Percha
Compaction
Canals
Temperature
Heating
2013
13 引文 (Scopus)

3D scaffold with PCL combined biomedical ceramic materials for bone tissue regeneration

Chern, M. J., Yang, L. Y., Shen, Y. K. & Hung, J. H., 2013, 於 : International Journal of Precision Engineering and Manufacturing. 14, 12, p. 2201-2207 7 p.

研究成果: 雜誌貢獻文章

Tissue regeneration
Scaffolds (biology)
Ceramic materials
Scaffolds
Bone
6 引文 (Scopus)

Development of novel porous nasal scaffold using injection molding

Teng, P. T., Chern, M. J., Shen, Y. K. & Chiang, Y. C., 四月 2013, 於 : Polymer Engineering and Science. 53, 4, p. 762-769 8 p.

研究成果: 雜誌貢獻文章

Injection molding
Scaffolds
Leaching
Surgery
Tissue
8 引文 (Scopus)
Molding
Microstructure
Temperature
Die casting inserts
1 引文 (Scopus)

Oseto tissue regeneration on Poly-ε-caprolactone with biomedical ceramic materials

Chern, M. J., Shen, Y. K. & Hung, J. H., 九月 2013, 於 : Advanced Science Letters. 19, 9, p. 2572-2575 4 p.

研究成果: 雜誌貢獻文章

Tissue regeneration
support structure
Scaffold
Ceramics
Regeneration

人工合成多分子矯正彈性橡皮鏈之文獻回顧

林婉婷, 鄭信忠, 沈永康, 陳怡君 & 陳建鋒, 2013, 於 : 中華民國齒顎矯正學雜誌. 25, 1, p. 23-30 8 p.

研究成果: 雜誌貢獻文章

Dentition
Patient Compliance
Orthodontics
Saliva
Canidae
2012
10 引文 (Scopus)
Electric discharge machining
Microfluidics
Fabrication
Aluminum
Molding
37 引文 (Scopus)
Osteoblasts
Hydroxyapatite
Scaffolds
Sintering
Silica
2011
16 引文 (Scopus)

A novel and rapid fabrication for microlens arrays using microinjection molding

Luo, C. W., Chiang, Y. C., Cheng, H. C., Wu, C. Z., Huang, C. F., Wu, C. W., Shen, Y. K. & Lin, Y., 二月 2011, 於 : Polymer Engineering and Science. 51, 2, p. 391-402 12 p.

研究成果: 雜誌貢獻文章

polycarbonate
Molding
Fabrication
Polymethyl Methacrylate
Polycarbonates

Rapid forming of hydroxyapatite-silica ceramics

Liu, F. H., Ni, T. Y., Shen, Y. K. & Lee, J. L., 2011, 於 : Key Engineering Materials. 450, p. 137-140 4 p.

研究成果: 雜誌貢獻文章

Durapatite
Hydroxyapatite
Silicon Dioxide
Silica
Slurries
14 引文 (Scopus)

Selective laser gelation of ceramic-matrix composites

Liu, F. H., Shen, Y. K. & Liao, Y. S., 一月 2011, 於 : Composites Part B: Engineering. 42, 1, p. 57-61 5 p.

研究成果: 雜誌貢獻文章

Ceramic matrix composites
Gelation
Lasers
Silicon Dioxide
Silica
20 引文 (Scopus)

Warpage phenomenon of thin-wall injection molding

Chiang, Y. C., Cheng, H. C., Huang, C. F., Lee, J. L., Lin, Y. & Shen, Y. K., 七月 2011, 於 : International Journal of Advanced Manufacturing Technology. 55, 5-8, p. 517-526 10 p.

研究成果: 雜誌貢獻文章

Butadiene
Injection molding
Styrene
Polycarbonates
Molding
2010
17 引文 (Scopus)

Brightness field distributions of microlens arrays using micro molding

Cheng, H. C., Huang, C. F., Lin, Y. & Shen, Y. K., 十二月 20 2010, 於 : Optics Express. 18, 26, p. 26887-26904 18 p.

研究成果: 雜誌貢獻文章

injection molding
brightness
injection
electroforming
photoresists
15 引文 (Scopus)

Micro fabrication of microlens arrays by micro dispensing

Cheng, H. C., Wang, C. H., Huang, C. F., Shen, Y. K., Lin, Y., Sheu, D. Y. & Hu, Y. H., 九月 2010, 於 : Polymers for Advanced Technologies. 21, 9, p. 632-639 8 p.

研究成果: 雜誌貢獻文章

Microfabrication
Electroforming
polycarbonate
Resins
Processing
21 引文 (Scopus)

Microfluidic chip fabrication using hot embossing and thermal bonding of cop

Pemg, B. Y., Wu, C. W., Shen, Y. K. & Lin, Y., 七月 2010, 於 : Polymers for Advanced Technologies. 21, 7, p. 457-466 10 p.

研究成果: 雜誌貢獻文章

Microfluidics
Molding
Fabrication
Die casting inserts
Silicon
1 引文 (Scopus)

Rapid manufacturing of metal-ceramic composites

Liu, F. H., Ni, T. Y., Liao, Y. S., Shen, Y. K. & Ting, K., 2010, 於 : Key Engineering Materials. 419-420, p. 485-488 4 p.

研究成果: 雜誌貢獻文章

Cermets
Composite materials
Polymethyl Methacrylate
Sols
Silicon Dioxide

溶劑澆鑄/粒子過濾法結合模流分析應用於三維多孔性生物鼻支架

Chiang, Y. C., Hsueh, J-Y., Lee, F-P., Hsu, H-T., Shen, Y-K. & Teng, P-T., 2010, 於 : Journal of Taiwan Otolaryngology - Head and Neck Surgery. 45, 6, p. 163-170 8 p.

研究成果: 雜誌貢獻文章

Nose
Porosity
Durapatite
Polymers
Injections
2009
10 引文 (Scopus)

Analysis of mold insert fabrication for the processing of microfluidic chip

Shen, Y. K., Lin, J. D. & Hong, R. H., 一月 2009, 於 : Polymer Engineering and Science. 49, 1, p. 104-114 11 p.

研究成果: 雜誌貢獻文章

Die casting inserts
Microfluidics
Molding
Fabrication
Photoresists
2008
6 引文 (Scopus)

Analysis for biodegradable polymeric scaffold of tissue engineering on precision injection molding

Wu, T. L., Ou, K. L., Cheng, H. C., Huang, C. F., Shen, Y. K., Chian, Y. C., Lin, Y., Chan, Y. H. & Li, C. P., 十一月 2008, 於 : International Communications in Heat and Mass Transfer. 35, 9, p. 1101-1105 5 p.

研究成果: 雜誌貢獻文章

NEMS
injection molding
tissue engineering
Scaffolds (biology)
Tissue engineering
22 引文 (Scopus)

Analysis for microstructure of microlens arrays on micro-injection molding by numerical simulation

Shen, Y. K., Chang, C. Y., Shen, Y. S., Hsu, S. C. & Wu, M. W., 七月 2008, 於 : International Communications in Heat and Mass Transfer. 35, 6, p. 723-727 5 p.

研究成果: 雜誌貢獻文章

NEMS
injection molding
Injection molding
microelectromechanical systems
MEMS
20 引文 (Scopus)

Analysis for optimal gate design of thin-walled injection molding

Shen, Y. K., Wu, C. W., Yu, Y. F. & Chung, H. W., 七月 2008, 於 : International Communications in Heat and Mass Transfer. 35, 6, p. 728-734 7 p.

研究成果: 雜誌貢獻文章

injection molding
Injection molding
Computer simulation
dictionaries
Consumer products

Analysis for replication and surface roughness of micro-feature of silicon mold insert by UV-LIGA method

Huang, C. F., Lee, J. L., Shen, Y. K., Wu, C. W., Lin, Y., Hsu, S. C., Wu, M. W. & Kao, C. Y., 2008, 於 : Advanced Materials Research. 47-50 PART 1, p. 443-446 4 p.

研究成果: 雜誌貢獻文章

Electroforming
Molding
Seed
Surface roughness
Silicon
10 引文 (Scopus)
Injection molding
Molding
Luminance
Compression molding
Microstructure

Precision transfer and replication of ultrasonic nanoimprint

Huang, C. F., Lee, J. L., Shen, Y. K., Lin, Y. & Wu, C. W., 2008, 於 : Advanced Materials Research. 47-50 PART 1, p. 411-414 4 p.

研究成果: 雜誌貢獻文章

Ultrasonics
Fusion reactions
Plastic films
Vibrations (mechanical)
Time delay

Study on micro fabrication of mold insert for microlens arrays by micro dispensing

Shen, Y. K., Lin, Y., Sheu, D. Y., Ger, M. D., Hu, Y. H., Hong, R. & Wang, S. M., 2008, 於 : Key Engineering Materials. 364-366 I, p. 48-52 5 p.

研究成果: 雜誌貢獻文章

Microfabrication
Electroforming
Resins
Molding
Processing
2 引文 (Scopus)

Study on micro-feature of backlight module for micro injection molding technology

Shen, Y. K., Lin, Y., Lee, J. L., Liu, F. H., Wu, C. W., Ou, K. L., Wu, W. Y. & Tu, Y. C., 2008, 於 : Key Engineering Materials. 364-366 I, p. 53-57 5 p.

研究成果: 雜誌貢獻文章

Injection molding
Temperature
Polymethyl Methacrylate
Flow velocity
Etching
12 引文 (Scopus)

Study on micro-injection molding of light guiding plate by numerical simulation

Tsai, M. H., Ou, K. L., Huang, C. F., Cheng, H. C., Shen, Y. K., Chang, C. Y., Wu, C. H., Chen, J. H. & Guan, P. J., 十一月 2008, 於 : International Communications in Heat and Mass Transfer. 35, 9, p. 1097-1100 4 p.

研究成果: 雜誌貢獻文章

MOEMS
NEMS
microoptoelectromechanical systems
injection molding
Injection molding

The integrated packaging process for optical sensor and RFID used in harsh environment conditions

Wu, C. W., Shen, Y. K., Lee, C. U., Wei, C. S. & Hsiao, C. C., 2008, 於 : Key Engineering Materials. 364-366 I, p. 419-424 6 p.

研究成果: 雜誌貢獻文章

Optical sensors
Radio frequency identification (RFID)
Packaging
Sensors
Actuators

The study of fabrication of the liquid core waveguide nutrient sensor

Wu, C. W., Shen, Y. K., Lee, Y. L., Wei, C. S. & Hsiao, C. C., 2008, 於 : Key Engineering Materials. 364-366 I, p. 425-430 6 p.

研究成果: 雜誌貢獻文章

Polytetrafluoroethylene
Polytetrafluoroethylenes
Nutrients
Waveguides
Fabrication
1 引文 (Scopus)

The wear behavior of pulse current electroforming Ni-P-SiC composite coatings

Hou, K. H., Jeng, M. C., Shen, Y. K. & Ger, M. D., 2008, 於 : Key Engineering Materials. 364-366 I, p. 358-363 6 p.

研究成果: 雜誌貢獻文章

Electroforming
Composite coatings
Wear of materials
Wear resistance
Hardness
2007
6 引文 (Scopus)

Analysis of the replication properties of lightguiding plate for micro injection compression molding

Shen, Y. K., Chang, H. J. & Hung, L. H., 2007, 於 : Key Engineering Materials. 329, p. 643-648 6 p.

研究成果: 雜誌貢獻文章

Compression molding
Injection molding
Microstructure
Digital cameras
Polymethyl Methacrylate
20 引文 (Scopus)

Anti-adhesive effects of diverse self-assembled monolayers in nanoimprint lithography

Wu, C. W., Shen, Y. K., Chuang, S. Y. & Wei, C. S., 九月 12 2007, 於 : Sensors and Actuators, A: Physical. 139, 1-2 SPEC. ISS., p. 145-151 7 p.

研究成果: 雜誌貢獻文章

Nanoimprint lithography
OTS (ESA)
Self assembled monolayers
adhesives
Adhesives
13 引文 (Scopus)
Compression molding
Injection molding
Microstructure
Temperature
Digital cameras

Flapping MAV micro aerial vehicle with PVDF-parylene composite skin

Yang, L. J., Feng, C. K., Hsu, C. K., Ho, J. Y., Feng, G. H., Shih, H. M. & Shen, Y. K., 九月 2007, 於 : Hangkong Taikong ji Minhang Xuekan/Journal of Aeronautics, Astronautics and Aviation. 39 A, 3, p. 195-202 8 p.

研究成果: 雜誌貢獻文章

Skin
Antennas
Composite materials
Free flight
Lithium batteries
2006
13 引文 (Scopus)
Die casting inserts
Molding
Surface roughness
Fabrication
Taguchi methods
4 引文 (Scopus)

Flow visualization of solder ball arrangement for underfill encapsulation of flip chip

Shen, Y. K., Lin, P. T. & Yeh, S. W., 八月 2006, 於 : Journal of Reinforced Plastics and Composites. 25, 11, p. 1205-1213 9 p.

研究成果: 雜誌貢獻文章

Flow visualization
Encapsulation
Soldering alloys
Computer simulation
Experiments
1 引文 (Scopus)

Micro-structure of light guide plate for micro injection molding

Shen, Y. K., Wu, W. Y. & Houng, L. H., 六月 2006, 於 : Nami Jishu yu Jingmi Gongcheng/Nanotechnology and Precision Engineering. 4, 2, p. 111-114 4 p.

研究成果: 雜誌貢獻文章

injection molding
flatness
Injection molding
microstructure
Microstructure
16 引文 (Scopus)

Study on flow visualization of flip chip encapsulation process for numerical simulation

Shen, Y. K., Huang, S. T., Chen, C. J. & Yu, S., 二月 2006, 於 : International Communications in Heat and Mass Transfer. 33, 2, p. 151-157 7 p.

研究成果: 雜誌貢獻文章

flow visualization
Flow visualization
Encapsulation
chips
injection