如果您對這些純文本內容做了任何改變,很快就會看到。

研究成果

  • 768 引文
  • 16 h-指數
  • 75 文章
  • 23 會議貢獻
篩選
會議貢獻
2006

A novel fabrication method and optimum tooling design for microlens arrays

Shen, Y. K., Chang, C. Y., Shen, Y. S. & Yang, S. Y., 2006, Annual Technical Conference - ANTEC, Conference Proceedings. 卷 5. p. 2571-2575 5 p.

研究成果: 書貢獻/報告類型會議貢獻

1 引文 斯高帕斯(Scopus)

A novel fabrication method for mold insert of injection molded microlens array

Shen, Y. K., 2006, Materials Science Forum. 卷 532-533. p. 665-668 4 p. (Materials Science Forum; 卷 532-533).

研究成果: 書貢獻/報告類型會議貢獻

3 引文 斯高帕斯(Scopus)

The novel fabrication method and optimum tooling design used for microlens arrays

Shen, Y. K. & Shen, Y. S., 2006, Proceedings of 1st IEEE International Conference on Nano Micro Engineered and Molecular Systems, 1st IEEE-NEMS. p. 187-191 5 p. 4134931

研究成果: 書貢獻/報告類型會議貢獻

2008

Microfluidic chip fabrication by micro-powder blasting

Shih, Y. H., Shen, Y. K., Lin, Y., Ou, K. L., Hong, R. H. & Hsu, S. C., 2008, 3rd IEEE International Conference on Nano/Micro Engineered and Molecular Systems, NEMS. p. 780-783 4 p. 4484442

研究成果: 書貢獻/報告類型會議貢獻

1 引文 斯高帕斯(Scopus)

Microfluidic chip fabrication for silicon mold insert by micro hot embossing

Shih, Y. H., Shen, Y. K., Lin, Y., Lee, J. L., Lin, C. T., Lee, C. P. & Wu, M. W., 2008, 3rd IEEE International Conference on Nano/Micro Engineered and Molecular Systems, NEMS. p. 690-693 4 p. 4484423

研究成果: 書貢獻/報告類型會議貢獻

3 引文 斯高帕斯(Scopus)
2009

A Micro-Aerial-Vehicle (MAV) with figure-of-eight flapping induced by flexible wing frames

Yang, L. J., Hsu, C. K., Hsiao, F. Y., Feng, C. K. & Shen, Y. K., 2009, 47th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition. 2009-0875

研究成果: 書貢獻/報告類型會議貢獻

13 引文 斯高帕斯(Scopus)

Brightness field and Luminance distribution of light guiding plate using micro molding

Huang, C. F., Lee, J. L., Shen, Y. K., Lin, Y. & Wu, C. W., 2009, Proceedings of SPIE - The International Society for Optical Engineering. 卷 7506. 750603

研究成果: 書貢獻/報告類型會議貢獻

Fabrication and analysis of microfluidic mold insert by micro electrical discharge machining

Lee, J. L., Shen, Y. K., Lin, Y., Teng, P. T. & Huang, C. M., 2009, 4th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, NEMS 2009. p. 941-945 5 p. 5068729

研究成果: 書貢獻/報告類型會議貢獻

2 引文 斯高帕斯(Scopus)

The microchannel of microfluidic chip fabrication by micro-powder blasting

Huang, C. F., Shen, Y. K., Lin, Y. & Wu, C. W., 2009, Advanced Materials Research. 卷 76-78. p. 367-372 6 p. (Advanced Materials Research; 卷 76-78).

研究成果: 書貢獻/報告類型會議貢獻

2010

Fabrication and detection for the skeletons of micro aerial vehicle using precision injection molding

Lee, J. L., Ho, C. H., Lin, Y. & Shen, Y. K., 2010, Key Engineering Materials. 卷 443. p. 75-80 6 p. (Key Engineering Materials; 卷 443).

研究成果: 書貢獻/報告類型會議貢獻

1 引文 斯高帕斯(Scopus)

Fabrication inner channel ceramics using layer additive method

Liu, F. H., Lin, W. H., Shen, Y. K. & Lee, J. L., 2010, Key Engineering Materials. 卷 443. p. 528-533 6 p. (Key Engineering Materials; 卷 443).

研究成果: 書貢獻/報告類型會議貢獻

Fabrication of a large-area silicon mold with microstructures using a novel recombining technique

Wu, C. W., Chi, C. H., Tsai, H. Y. & Shen, Y. K., 2010, Key Engineering Materials. 卷 443. p. 213-218 6 p. (Key Engineering Materials; 卷 443).

研究成果: 書貢獻/報告類型會議貢獻

Surface modification of plastic thin film using anodic aluminum oxide template for nano imprint

Wu, C. W., Lee, J. L., Lin, Y. & Shen, Y. K., 2010, Key Engineering Materials. 卷 443. p. 711-716 6 p. (Key Engineering Materials; 卷 443).

研究成果: 書貢獻/報告類型會議貢獻

2011

Invasive PLA microneedle fabrication applied to drug delivery system

Kuo, H. C., Lin, Y., Shen, Y. K. & Kang, S. C., 2011, 2011 2nd International Conference on Mechanic Automation and Control Engineering, MACE 2011 - Proceedings. p. 7437-7440 4 p. 5988769

研究成果: 書貢獻/報告類型會議貢獻

3 引文 斯高帕斯(Scopus)

Study on the flow situations of lightguiding plates by micro injection molding

Huang, C. F., Lin, Y. & Shen, Y. K., 2011, Advanced Materials Research. 卷 268-270. p. 123-128 6 p. (Advanced Materials Research; 卷 268-270).

研究成果: 書貢獻/報告類型會議貢獻

1 引文 斯高帕斯(Scopus)
2012

Morphological evolution of nanostructured surface using anodic aluminum template

Chiu, C. Y., Huang, C. F., Lee, J. L., Lin, Y. & Shen, Y. K., 2012, Proceedings of SPIE - The International Society for Optical Engineering. 卷 8409. 84091G

研究成果: 書貢獻/報告類型會議貢獻

Optimal design of microneedles inserts into skin by numerical simulation

Chiu, C. Y., Kuo, H. C., Lin, Y., Lee, J. L., Shen, Y. K. & Kang, S. J., 2012, Key Engineering Materials. 卷 516. p. 624-628 5 p. (Key Engineering Materials; 卷 516).

研究成果: 書貢獻/報告類型會議貢獻

3 引文 斯高帕斯(Scopus)

Warpage measurement of a micro electrical fan on micro-injection molding

Lee, J. L., Lin, Y. & Shen, Y. K., 2012, Applied Mechanics and Materials. 卷 184-185. p. 1651-1654 4 p. (Applied Mechanics and Materials; 卷 184-185).

研究成果: 書貢獻/報告類型會議貢獻

2013

A modified surface on titanium alloy by micro-blasting process

Lin, Y., Huang, C. F., Cheng, H. C. & Shen, Y. K., 2013, Advanced Materials Research. 卷 797. p. 696-699 4 p. (Advanced Materials Research; 卷 797).

研究成果: 書貢獻/報告類型會議貢獻

2 引文 斯高帕斯(Scopus)

Optimal processing for hydrophobic nanopillar polymer surfaces using nanoporous alumina template

Chiu, C. Y., Lin, Y., Tseng, Y. C. & Shen, Y. K., 2013, Advanced Materials Research. 卷 646. p. 84-89 6 p. (Advanced Materials Research; 卷 646).

研究成果: 書貢獻/報告類型會議貢獻

1 引文 斯高帕斯(Scopus)

Study on cellar behaviors on different micro/nano structures of anodic aluminum oxide template

Huang, C. F., Cheng, H. C., Lin, Y. & Shen, Y. K., 2013, Advanced Materials Research. 卷 647. p. 111-117 7 p. (Advanced Materials Research; 卷 647).

研究成果: 書貢獻/報告類型會議貢獻

2014

Analysis on warpage of support structure of computer hard disk for optimum processing by precision injection molding

Wang, Y. N., Wang, H. S., Ho, W. T., Lin, Y. & Shen, Y. K., 2014, Information Technology and Computer Application Engineering - Proceedings of the 2013 International Conference on Information Technology and Computer Application Engineering, ITCAE 2013. shers, p. 811-814 4 p.

研究成果: 書貢獻/報告類型會議貢獻

Fabrication of micropattern of plastic film using ultrasonic micro embossing

Cheng, H. C., Huang, C. F., Lin, Y. & Shen, Y. K., 2014, Advanced Materials Research. Trans Tech Publications, 卷 912-914. p. 141-144 4 p. (Advanced Materials Research; 卷 912-914).

研究成果: 書貢獻/報告類型會議貢獻