如果您對這些純文本內容做了任何改變,很快就會看到。

研究成果 1994 2019

  • 733 引文
  • 16 h-指數
  • 71 文章
  • 23 會議貢獻
篩選
會議貢獻
2014

Analysis on warpage of support structure of computer hard disk for optimum processing by precision injection molding

Wang, Y. N., Wang, H. S., Ho, W. T., Lin, Y. & Shen, Y. K., 2014, Information Technology and Computer Application Engineering - Proceedings of the 2013 International Conference on Information Technology and Computer Application Engineering, ITCAE 2013. shers, p. 811-814 4 p.

研究成果: 書貢獻/報告類型會議貢獻

Hard disk storage
Injection molding
Processing
Taguchi methods
Temperature

Fabrication of micropattern of plastic film using ultrasonic micro embossing

Cheng, H. C., Huang, C. F., Lin, Y. & Shen, Y. K., 2014, Advanced Materials Research. Trans Tech Publications, 卷 912-914. p. 141-144 4 p. (Advanced Materials Research; 卷 912-914).

研究成果: 書貢獻/報告類型會議貢獻

Plastic films
Ultrasonics
Fabrication
Ultrasonic waves
Plastics
2013
2 引文 (Scopus)

A modified surface on titanium alloy by micro-blasting process

Lin, Y., Huang, C. F., Cheng, H. C. & Shen, Y. K., 2013, Advanced Materials Research. 卷 797. p. 696-699 4 p. (Advanced Materials Research; 卷 797).

研究成果: 書貢獻/報告類型會議貢獻

Blasting
Titanium alloys
Abrasives
Hydroxyapatite
Apatite
1 引文 (Scopus)

Optimal processing for hydrophobic nanopillar polymer surfaces using nanoporous alumina template

Chiu, C. Y., Lin, Y., Tseng, Y. C. & Shen, Y. K., 2013, Advanced Materials Research. 卷 646. p. 84-89 6 p. (Advanced Materials Research; 卷 646).

研究成果: 書貢獻/報告類型會議貢獻

Plastic films
Nanostructures
Alumina
Aluminum
Thin films

Study on cellar behaviors on different micro/nano structures of anodic aluminum oxide template

Huang, C. F., Cheng, H. C., Lin, Y. & Shen, Y. K., 2013, Advanced Materials Research. 卷 647. p. 111-117 7 p. (Advanced Materials Research; 卷 647).

研究成果: 書貢獻/報告類型會議貢獻

Osteoblasts
Aluminum
Oxides
Clean rooms
Microstructure
2012

Morphological evolution of nanostructured surface using anodic aluminum template

Chiu, C. Y., Huang, C. F., Lee, J. L., Lin, Y. & Shen, Y. K., 2012, Proceedings of SPIE - The International Society for Optical Engineering. 卷 8409. 84091G

研究成果: 書貢獻/報告類型會議貢獻

polycarbonate
Nanostructures
Aluminum
Aluminum Oxide
Thin Films
2 引文 (Scopus)

Optimal design of microneedles inserts into skin by numerical simulation

Chiu, C. Y., Kuo, H. C., Lin, Y., Lee, J. L., Shen, Y. K. & Kang, S. J., 2012, Key Engineering Materials. 卷 516. p. 624-628 5 p. (Key Engineering Materials; 卷 516).

研究成果: 書貢獻/報告類型會議貢獻

Skin
Biodegradable polymers
Computer simulation
Acids
MEMS

Warpage measurement of a micro electrical fan on micro-injection molding

Lee, J. L., Lin, Y. & Shen, Y. K., 2012, Applied Mechanics and Materials. 卷 184-185. p. 1651-1654 4 p. (Applied Mechanics and Materials; 卷 184-185).

研究成果: 書貢獻/報告類型會議貢獻

Injection molding
Fans
Butadiene
Polyamides
Styrene
2011
3 引文 (Scopus)

Invasive PLA microneedle fabrication applied to drug delivery system

Kuo, H. C., Lin, Y., Shen, Y. K. & Kang, S. C., 2011, 2011 2nd International Conference on Mechanic Automation and Control Engineering, MACE 2011 - Proceedings. p. 7437-7440 4 p. 5988769

研究成果: 書貢獻/報告類型會議貢獻

Skin
Fabrication
Acids
Biodegradable polymers
Polydimethylsiloxane
1 引文 (Scopus)

Study on the flow situations of lightguiding plates by micro injection molding

Huang, C. F., Lin, Y. & Shen, Y. K., 2011, Advanced Materials Research. 卷 268-270. p. 123-128 6 p. (Advanced Materials Research; 卷 268-270).

研究成果: 書貢獻/報告類型會議貢獻

Injection molding
Plastics
Heating
Temperature distribution
Viscosity
2010
1 引文 (Scopus)

Fabrication and detection for the skeletons of micro aerial vehicle using precision injection molding

Lee, J. L., Ho, C. H., Lin, Y. & Shen, Y. K., 2010, Key Engineering Materials. 卷 443. p. 75-80 6 p. (Key Engineering Materials; 卷 443).

研究成果: 書貢獻/報告類型會議貢獻

Injection molding
Antennas
Micro air vehicle (MAV)
Fabrication
Taguchi methods

Fabrication inner channel ceramics using layer additive method

Liu, F. H., Lin, W. H., Shen, Y. K. & Lee, J. L., 2010, Key Engineering Materials. 卷 443. p. 528-533 6 p. (Key Engineering Materials; 卷 443).

研究成果: 書貢獻/報告類型會議貢獻

Curing
Slurries
Fabrication
Powders
Lasers

Fabrication of a large-area silicon mold with microstructures using a novel recombining technique

Wu, C. W., Chi, C. H., Tsai, H. Y. & Shen, Y. K., 2010, Key Engineering Materials. 卷 443. p. 213-218 6 p. (Key Engineering Materials; 卷 443).

研究成果: 書貢獻/報告類型會議貢獻

Silicon
Fabrication
Microstructure
Micromachining
Polydimethylsiloxane

Surface modification of plastic thin film using anodic aluminum oxide template for nano imprint

Wu, C. W., Lee, J. L., Lin, Y. & Shen, Y. K., 2010, Key Engineering Materials. 卷 443. p. 711-716 6 p. (Key Engineering Materials; 卷 443).

研究成果: 書貢獻/報告類型會議貢獻

polycarbonate
Plastic films
Aluminum Oxide
Polycarbonates
Surface treatment
2009
14 引文 (Scopus)

A Micro-Aerial-Vehicle (MAV) with figure-of-eight flapping induced by flexible wing frames

Yang, L. J., Hsu, C. K., Hsiao, F. Y., Feng, C. K. & Shen, Y. K., 2009, 47th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition. 2009-0875

研究成果: 書貢獻/報告類型會議貢獻

flexible wings
Flexible wings
flapping
vehicles
Antennas

Brightness field and Luminance distribution of light guiding plate using micro molding

Huang, C. F., Lee, J. L., Shen, Y. K., Lin, Y. & Wu, C. W., 2009, Proceedings of SPIE - The International Society for Optical Engineering. 卷 7506. 750603

研究成果: 書貢獻/報告類型會議貢獻

Molding
Luminance
Brightness
luminance
injection molding
2 引文 (Scopus)

Fabrication and analysis of microfluidic mold insert by micro electrical discharge machining

Lee, J. L., Shen, Y. K., Lin, Y., Teng, P. T. & Huang, C. M., 2009, 4th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, NEMS 2009. p. 941-945 5 p. 5068729

研究成果: 書貢獻/報告類型會議貢獻

Electric discharge machining
Microfluidics
Fabrication
Aluminum
Molding

The microchannel of microfluidic chip fabrication by micro-powder blasting

Huang, C. F., Shen, Y. K., Lin, Y. & Wu, C. W., 2009, Advanced Materials Research. 卷 76-78. p. 367-372 6 p. (Advanced Materials Research; 卷 76-78).

研究成果: 書貢獻/報告類型會議貢獻

Blasting
Microchannels
Microfluidics
Powders
Fabrication
2008
1 引文 (Scopus)

Microfluidic chip fabrication by micro-powder blasting

Shih, Y. H., Shen, Y. K., Lin, Y., Ou, K. L., Hong, R. H. & Hsu, S. C., 2008, 3rd IEEE International Conference on Nano/Micro Engineered and Molecular Systems, NEMS. p. 780-783 4 p. 4484442

研究成果: 書貢獻/報告類型會議貢獻

Blasting
Microfluidics
Erosion
Nozzles
Powders
3 引文 (Scopus)

Microfluidic chip fabrication for silicon mold insert by micro hot embossing

Shih, Y. H., Shen, Y. K., Lin, Y., Lee, J. L., Lin, C. T., Lee, C. P. & Wu, M. W., 2008, 3rd IEEE International Conference on Nano/Micro Engineered and Molecular Systems, NEMS. p. 690-693 4 p. 4484423

研究成果: 書貢獻/報告類型會議貢獻

Microfluidics
Fabrication
Silicon
Molding
Taguchi methods
2006
1 引文 (Scopus)

A novel fabrication method and optimum tooling design for microlens arrays

Shen, Y. K., Chang, C. Y., Shen, Y. S. & Yang, S. Y., 2006, Annual Technical Conference - ANTEC, Conference Proceedings. 卷 5. p. 2571-2575 5 p.

研究成果: 書貢獻/報告類型會議貢獻

Electroforming
Lithography
Fabrication
Metals
Temperature
3 引文 (Scopus)

A novel fabrication method for mold insert of injection molded microlens array

Shen, Y. K., 2006, Materials Science Forum. 卷 532-533. p. 665-668 4 p. (Materials Science Forum; 卷 532-533).

研究成果: 書貢獻/報告類型會議貢獻

Injection molding
Fabrication
Die casting inserts
Compression molding
Surface roughness

The novel fabrication method and optimum tooling design used for microlens arrays

Shen, Y. K. & Shen, Y. S., 2006, Proceedings of 1st IEEE International Conference on Nano Micro Engineered and Molecular Systems, 1st IEEE-NEMS. p. 187-191 5 p. 4134931

研究成果: 書貢獻/報告類型會議貢獻

Fabrication
Temperature
Processing
Electroforming
Taguchi methods