如果您對這些純文本內容做了任何改變,很快就會看到。

研究成果 1994 2019

  • 733 引文
  • 16 h-指數
  • 71 文章
  • 23 會議貢獻
2019
1 引文 (Scopus)

Analysis on characteristics of ZnO surface acoustic wave with and without micro-structures

Huang, H. Y., Chiang, H. J., Wu, C. Z., Lin, Y. & Shen, Y. K., 七月 1 2019, 於 : Micromachines. 10, 7, 434.

研究成果: 雜誌貢獻文章

開啟存取
Zinc oxide
Surface waves
Acoustic waves
Thin films
Microstructure
titanium alloys
Blasting
blasts
Titanium alloys
Cell culture
2017
2 引文 (Scopus)
Cell culture
Aluminum
Osteoblasts
Blasting
Microstructure
3 引文 (Scopus)
Bite Force
Bone
Orthodontics
Bone and Bones
Computer simulation
1 引文 (Scopus)

Rhombic-shaped channel stent with enhanced drug capacity and fatigue life

Hsiao, H. M., Lin, C. H., Shen, Y. K., Chou, T. Y. & Hsu, Y. Y., 十二月 24 2017, 於 : Micromachines. 9, 1, 3.

研究成果: 雜誌貢獻文章

Stents
Fatigue of materials
Struts
Safety factor
Drug delivery
Orthodontics
Biocompatibility
Surface treatment
Physical properties
Water absorption
2016
1 引文 (Scopus)
polycarbonate
Aluminum
Aluminum Oxide
Nanostructures
Thin films
2014

Analysis on surface modification of orthodontic power chain by nanoimprinting process

Cheng, H. C., Lin, W. T., Shen, Y. K. & Wang, Y. H., 五月 1 2014, 於 : Journal of Polymer Engineering. 34, 3, p. 209-217 9 p.

研究成果: 雜誌貢獻文章

Surface treatment
Nanostructures
Discoloration
Beverages
Water

Analysis on warpage of support structure of computer hard disk for optimum processing by precision injection molding

Wang, Y. N., Wang, H. S., Ho, W. T., Lin, Y. & Shen, Y. K., 2014, Information Technology and Computer Application Engineering - Proceedings of the 2013 International Conference on Information Technology and Computer Application Engineering, ITCAE 2013. shers, p. 811-814 4 p.

研究成果: 書貢獻/報告類型會議貢獻

Hard disk storage
Injection molding
Processing
Taguchi methods
Temperature

Fabrication of micropattern of plastic film using ultrasonic micro embossing

Cheng, H. C., Huang, C. F., Lin, Y. & Shen, Y. K., 2014, Advanced Materials Research. Trans Tech Publications, 卷 912-914. p. 141-144 4 p. (Advanced Materials Research; 卷 912-914).

研究成果: 書貢獻/報告類型會議貢獻

Plastic films
Ultrasonics
Fabrication
Ultrasonic waves
Plastics
5 引文 (Scopus)

Optimal processing for hydrophobic nanopillar polymer surfaces using nanoporous alumina template

Huang, C. F., Lin, Y., Shen, Y. K. & Fan, Y. M., 六月 30 2014, 於 : Applied Surface Science. 305, p. 419-426 8 p.

研究成果: 雜誌貢獻文章

Plastic films
Aluminum Oxide
Polymers
Alumina
Thin films

Replication of plastic thin film by microfeature mould in large area hot embossing

Yang, H. P., Shen, Y. K. & Lin, Y., 三月 2014, 於 : Plastics, Rubber and Composites. 43, 2, p. 39-45 7 p.

研究成果: 雜誌貢獻文章

Plastic films
Polymethyl Methacrylate
Polymethyl methacrylates
Thin films
Surface roughness
11 引文 (Scopus)
Nanostructures
Plastic films
Alumina
Aluminum
Thin films
1 引文 (Scopus)
Gutta-Percha
Compaction
Canals
Temperature
Heating
2013
13 引文 (Scopus)

3D scaffold with PCL combined biomedical ceramic materials for bone tissue regeneration

Chern, M. J., Yang, L. Y., Shen, Y. K. & Hung, J. H., 2013, 於 : International Journal of Precision Engineering and Manufacturing. 14, 12, p. 2201-2207 7 p.

研究成果: 雜誌貢獻文章

Tissue regeneration
Scaffolds (biology)
Ceramic materials
Scaffolds
Bone
2 引文 (Scopus)

A modified surface on titanium alloy by micro-blasting process

Lin, Y., Huang, C. F., Cheng, H. C. & Shen, Y. K., 2013, Advanced Materials Research. 卷 797. p. 696-699 4 p. (Advanced Materials Research; 卷 797).

研究成果: 書貢獻/報告類型會議貢獻

Blasting
Titanium alloys
Abrasives
Hydroxyapatite
Apatite
6 引文 (Scopus)

Development of novel porous nasal scaffold using injection molding

Teng, P. T., Chern, M. J., Shen, Y. K. & Chiang, Y. C., 四月 2013, 於 : Polymer Engineering and Science. 53, 4, p. 762-769 8 p.

研究成果: 雜誌貢獻文章

Injection molding
Scaffolds
Leaching
Surgery
Tissue
8 引文 (Scopus)
Molding
Microstructure
Temperature
Die casting inserts
1 引文 (Scopus)

Optimal processing for hydrophobic nanopillar polymer surfaces using nanoporous alumina template

Chiu, C. Y., Lin, Y., Tseng, Y. C. & Shen, Y. K., 2013, Advanced Materials Research. 卷 646. p. 84-89 6 p. (Advanced Materials Research; 卷 646).

研究成果: 書貢獻/報告類型會議貢獻

Plastic films
Nanostructures
Alumina
Aluminum
Thin films
1 引文 (Scopus)

Oseto tissue regeneration on Poly-ε-caprolactone with biomedical ceramic materials

Chern, M. J., Shen, Y. K. & Hung, J. H., 九月 2013, 於 : Advanced Science Letters. 19, 9, p. 2572-2575 4 p.

研究成果: 雜誌貢獻文章

Tissue regeneration
support structure
Scaffold
Ceramics
Regeneration

Study on cellar behaviors on different micro/nano structures of anodic aluminum oxide template

Huang, C. F., Cheng, H. C., Lin, Y. & Shen, Y. K., 2013, Advanced Materials Research. 卷 647. p. 111-117 7 p. (Advanced Materials Research; 卷 647).

研究成果: 書貢獻/報告類型會議貢獻

Osteoblasts
Aluminum
Oxides
Clean rooms
Microstructure

人工合成多分子矯正彈性橡皮鏈之文獻回顧

林婉婷, 鄭信忠, 沈永康, 陳怡君 & 陳建鋒, 2013, 於 : 中華民國齒顎矯正學雜誌. 25, 1, p. 23-30 8 p.

研究成果: 雜誌貢獻文章

Dentition
Patient Compliance
Orthodontics
Saliva
Canidae
2012
10 引文 (Scopus)
Electric discharge machining
Microfluidics
Fabrication
Aluminum
Molding

Morphological evolution of nanostructured surface using anodic aluminum template

Chiu, C. Y., Huang, C. F., Lee, J. L., Lin, Y. & Shen, Y. K., 2012, Proceedings of SPIE - The International Society for Optical Engineering. 卷 8409. 84091G

研究成果: 書貢獻/報告類型會議貢獻

polycarbonate
Nanostructures
Aluminum
Aluminum Oxide
Thin Films
2 引文 (Scopus)

Optimal design of microneedles inserts into skin by numerical simulation

Chiu, C. Y., Kuo, H. C., Lin, Y., Lee, J. L., Shen, Y. K. & Kang, S. J., 2012, Key Engineering Materials. 卷 516. p. 624-628 5 p. (Key Engineering Materials; 卷 516).

研究成果: 書貢獻/報告類型會議貢獻

Skin
Biodegradable polymers
Computer simulation
Acids
MEMS
37 引文 (Scopus)
Osteoblasts
Hydroxyapatite
Scaffolds
Sintering
Silica

Warpage measurement of a micro electrical fan on micro-injection molding

Lee, J. L., Lin, Y. & Shen, Y. K., 2012, Applied Mechanics and Materials. 卷 184-185. p. 1651-1654 4 p. (Applied Mechanics and Materials; 卷 184-185).

研究成果: 書貢獻/報告類型會議貢獻

Injection molding
Fans
Butadiene
Polyamides
Styrene
2011
16 引文 (Scopus)

A novel and rapid fabrication for microlens arrays using microinjection molding

Luo, C. W., Chiang, Y. C., Cheng, H. C., Wu, C. Z., Huang, C. F., Wu, C. W., Shen, Y. K. & Lin, Y., 二月 2011, 於 : Polymer Engineering and Science. 51, 2, p. 391-402 12 p.

研究成果: 雜誌貢獻文章

polycarbonate
Molding
Fabrication
Polymethyl Methacrylate
Polycarbonates
3 引文 (Scopus)

Invasive PLA microneedle fabrication applied to drug delivery system

Kuo, H. C., Lin, Y., Shen, Y. K. & Kang, S. C., 2011, 2011 2nd International Conference on Mechanic Automation and Control Engineering, MACE 2011 - Proceedings. p. 7437-7440 4 p. 5988769

研究成果: 書貢獻/報告類型會議貢獻

Skin
Fabrication
Acids
Biodegradable polymers
Polydimethylsiloxane

Rapid forming of hydroxyapatite-silica ceramics

Liu, F. H., Ni, T. Y., Shen, Y. K. & Lee, J. L., 2011, 於 : Key Engineering Materials. 450, p. 137-140 4 p.

研究成果: 雜誌貢獻文章

Durapatite
Hydroxyapatite
Silicon Dioxide
Silica
Slurries
14 引文 (Scopus)

Selective laser gelation of ceramic-matrix composites

Liu, F. H., Shen, Y. K. & Liao, Y. S., 一月 2011, 於 : Composites Part B: Engineering. 42, 1, p. 57-61 5 p.

研究成果: 雜誌貢獻文章

Ceramic matrix composites
Gelation
Lasers
Silicon Dioxide
Silica
1 引文 (Scopus)

Study on the flow situations of lightguiding plates by micro injection molding

Huang, C. F., Lin, Y. & Shen, Y. K., 2011, Advanced Materials Research. 卷 268-270. p. 123-128 6 p. (Advanced Materials Research; 卷 268-270).

研究成果: 書貢獻/報告類型會議貢獻

Injection molding
Plastics
Heating
Temperature distribution
Viscosity
20 引文 (Scopus)

Warpage phenomenon of thin-wall injection molding

Chiang, Y. C., Cheng, H. C., Huang, C. F., Lee, J. L., Lin, Y. & Shen, Y. K., 七月 2011, 於 : International Journal of Advanced Manufacturing Technology. 55, 5-8, p. 517-526 10 p.

研究成果: 雜誌貢獻文章

Butadiene
Injection molding
Styrene
Polycarbonates
Molding
2010
17 引文 (Scopus)

Brightness field distributions of microlens arrays using micro molding

Cheng, H. C., Huang, C. F., Lin, Y. & Shen, Y. K., 十二月 20 2010, 於 : Optics Express. 18, 26, p. 26887-26904 18 p.

研究成果: 雜誌貢獻文章

injection molding
brightness
injection
electroforming
photoresists
1 引文 (Scopus)

Fabrication and detection for the skeletons of micro aerial vehicle using precision injection molding

Lee, J. L., Ho, C. H., Lin, Y. & Shen, Y. K., 2010, Key Engineering Materials. 卷 443. p. 75-80 6 p. (Key Engineering Materials; 卷 443).

研究成果: 書貢獻/報告類型會議貢獻

Injection molding
Antennas
Micro air vehicle (MAV)
Fabrication
Taguchi methods

Fabrication inner channel ceramics using layer additive method

Liu, F. H., Lin, W. H., Shen, Y. K. & Lee, J. L., 2010, Key Engineering Materials. 卷 443. p. 528-533 6 p. (Key Engineering Materials; 卷 443).

研究成果: 書貢獻/報告類型會議貢獻

Curing
Slurries
Fabrication
Powders
Lasers

Fabrication of a large-area silicon mold with microstructures using a novel recombining technique

Wu, C. W., Chi, C. H., Tsai, H. Y. & Shen, Y. K., 2010, Key Engineering Materials. 卷 443. p. 213-218 6 p. (Key Engineering Materials; 卷 443).

研究成果: 書貢獻/報告類型會議貢獻

Silicon
Fabrication
Microstructure
Micromachining
Polydimethylsiloxane
15 引文 (Scopus)

Micro fabrication of microlens arrays by micro dispensing

Cheng, H. C., Wang, C. H., Huang, C. F., Shen, Y. K., Lin, Y., Sheu, D. Y. & Hu, Y. H., 九月 2010, 於 : Polymers for Advanced Technologies. 21, 9, p. 632-639 8 p.

研究成果: 雜誌貢獻文章

Microfabrication
Electroforming
polycarbonate
Resins
Processing
21 引文 (Scopus)

Microfluidic chip fabrication using hot embossing and thermal bonding of cop

Pemg, B. Y., Wu, C. W., Shen, Y. K. & Lin, Y., 七月 2010, 於 : Polymers for Advanced Technologies. 21, 7, p. 457-466 10 p.

研究成果: 雜誌貢獻文章

Microfluidics
Molding
Fabrication
Die casting inserts
Silicon
1 引文 (Scopus)

Rapid manufacturing of metal-ceramic composites

Liu, F. H., Ni, T. Y., Liao, Y. S., Shen, Y. K. & Ting, K., 2010, 於 : Key Engineering Materials. 419-420, p. 485-488 4 p.

研究成果: 雜誌貢獻文章

Cermets
Composite materials
Polymethyl Methacrylate
Sols
Silicon Dioxide

Surface modification of plastic thin film using anodic aluminum oxide template for nano imprint

Wu, C. W., Lee, J. L., Lin, Y. & Shen, Y. K., 2010, Key Engineering Materials. 卷 443. p. 711-716 6 p. (Key Engineering Materials; 卷 443).

研究成果: 書貢獻/報告類型會議貢獻

polycarbonate
Plastic films
Aluminum Oxide
Polycarbonates
Surface treatment

溶劑澆鑄/粒子過濾法結合模流分析應用於三維多孔性生物鼻支架

Chiang, Y. C., Hsueh, J-Y., Lee, F-P., Hsu, H-T., Shen, Y-K. & Teng, P-T., 2010, 於 : Journal of Taiwan Otolaryngology - Head and Neck Surgery. 45, 6, p. 163-170 8 p.

研究成果: 雜誌貢獻文章

Nose
Porosity
Durapatite
Polymers
Injections
2009
14 引文 (Scopus)

A Micro-Aerial-Vehicle (MAV) with figure-of-eight flapping induced by flexible wing frames

Yang, L. J., Hsu, C. K., Hsiao, F. Y., Feng, C. K. & Shen, Y. K., 2009, 47th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition. 2009-0875

研究成果: 書貢獻/報告類型會議貢獻

flexible wings
Flexible wings
flapping
vehicles
Antennas
10 引文 (Scopus)

Analysis of mold insert fabrication for the processing of microfluidic chip

Shen, Y. K., Lin, J. D. & Hong, R. H., 一月 2009, 於 : Polymer Engineering and Science. 49, 1, p. 104-114 11 p.

研究成果: 雜誌貢獻文章

Die casting inserts
Microfluidics
Molding
Fabrication
Photoresists

Brightness field and Luminance distribution of light guiding plate using micro molding

Huang, C. F., Lee, J. L., Shen, Y. K., Lin, Y. & Wu, C. W., 2009, Proceedings of SPIE - The International Society for Optical Engineering. 卷 7506. 750603

研究成果: 書貢獻/報告類型會議貢獻

Molding
Luminance
Brightness
luminance
injection molding
2 引文 (Scopus)

Fabrication and analysis of microfluidic mold insert by micro electrical discharge machining

Lee, J. L., Shen, Y. K., Lin, Y., Teng, P. T. & Huang, C. M., 2009, 4th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, NEMS 2009. p. 941-945 5 p. 5068729

研究成果: 書貢獻/報告類型會議貢獻

Electric discharge machining
Microfluidics
Fabrication
Aluminum
Molding

The microchannel of microfluidic chip fabrication by micro-powder blasting

Huang, C. F., Shen, Y. K., Lin, Y. & Wu, C. W., 2009, Advanced Materials Research. 卷 76-78. p. 367-372 6 p. (Advanced Materials Research; 卷 76-78).

研究成果: 書貢獻/報告類型會議貢獻

Blasting
Microchannels
Microfluidics
Powders
Fabrication
2008
6 引文 (Scopus)

Analysis for biodegradable polymeric scaffold of tissue engineering on precision injection molding

Wu, T. L., Ou, K. L., Cheng, H. C., Huang, C. F., Shen, Y. K., Chian, Y. C., Lin, Y., Chan, Y. H. & Li, C. P., 十一月 2008, 於 : International Communications in Heat and Mass Transfer. 35, 9, p. 1101-1105 5 p.

研究成果: 雜誌貢獻文章

NEMS
injection molding
tissue engineering
Scaffolds (biology)
Tissue engineering
22 引文 (Scopus)

Analysis for microstructure of microlens arrays on micro-injection molding by numerical simulation

Shen, Y. K., Chang, C. Y., Shen, Y. S., Hsu, S. C. & Wu, M. W., 七月 2008, 於 : International Communications in Heat and Mass Transfer. 35, 6, p. 723-727 5 p.

研究成果: 雜誌貢獻文章

NEMS
injection molding
Injection molding
microelectromechanical systems
MEMS