Chung-Kwei Lin

2008

Investigation of the microstructure and characterizations of TiN/CrN nanomultilayer deposited by unbalanced magnetron sputter process

Su, C. Y., Pan, C. T., Liou, T. P., Chen, P. T. & Lin, C. K., 12月 25 2008, 於: Surface and Coatings Technology. 203, 5-7, p. 657-660 4 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

26 引文斯高帕斯（Scopus）

Oxygen partial pressure effect on the preparation of nanocrystalline tungsten oxide powders by a plasma arc gas condensation technique

Su, C. Y., Lin, C. K., Yang, T. K., Lin, H. C. & Pan, C. T., 9月 2008, 於: International Journal of Refractory Metals and Hard Materials. 26, 5, p. 423-428 6 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

19 引文斯高帕斯（Scopus）

Photocatalytic properties of porous TiO₂/Ag thin films

Chang, C-C., Chen, J. Y., Hsu, T. L., Lin, C. K. & Chan, C. C., 2月 29 2008, 於: Thin Solid Films. 516, 8, p. 1743-1747 5 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

59 引文斯高帕斯（Scopus）

Preparation and properties of Ti50Cu28 Ni15Sn7 bulk metallic glass by vacuum hot pressing

Lin, H. M., Lin, C. K., Jeng, R. R., Bor, H. Y. & Lee, P. Y., 8月 2008, 於: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 39, 8, p. 1857-1861 5 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

Supercapacitive properties of spray pyrolyzed iron-added manganese oxide powders deposited by electrophoretic deposition technique

Wang, S. C., Chen, C. Y., Chien, T. C., Lee, P. Y. & Lin, C. K., 12月 1 2008, 於: Thin Solid Films. 517, 3, p. 1234-1238 5 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

14 引文斯高帕斯（Scopus）

2007

A novel method of supporting gold nanoparticles on MWCNTs: Synchrotron X-ray reduction

Lin, K. N., Yang, T. Y., Lin, H. M., Hwu, Y. K., Wu, S. H. & Lin, C. K., 6月 2007, 於: China Particuology. 5, 3, p. 237-241 5 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

6 引文斯高帕斯（Scopus）

Characterization and modification of nanocrystalline iron oxide powders prepared by an inert gas condensation technique

Lin, C. K., Tsay, C. Y., Chen, C. Y., Chan, W. H., Su, C. Y. & Lin, H. M., 2007, 於: Materials Science Forum. 561-565, PART 2, p. 1379-1382 4 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

Characterization of spray pyrolyzed manganese oxide powders deposited by electrophoretic deposition technique

Chen, C. Y., Lyu, Y. R., Su, C. Y., Lin, H. M. & Lin, C. K., 12月 15 2007, 於: Surface and Coatings Technology. 202, 4-7, p. 1277-1281 5 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

35 引文斯高帕斯（Scopus）

Fabrication of Mg-Y-Cu bulk metallic glass by mechanical alloying and hot consolidation

Lee, P. Y., Liu, W. C., Lin, C. K. & Huang, J. C., 3月 25 2007, 於: Materials Science and Engineering A. 448-451, p. 1095-1098 4 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

16 引文斯高帕斯（Scopus）

Formation of tungsten oxide encapsulated in titanium oxide nanocages by modified plasma arc gas condensation

Su, C. Y., Lin, H. C., Lin, W. & Lin, C. K., 4月 18 2007, 於: Nanotechnology. 18, 15, 155602.

研究成果: 雜誌貢獻 › 文章 › 同行評審

9 引文斯高帕斯（Scopus）

Hydrogen absorption performance of mechanically alloyed (Mg 2Ni)100-xTix powder

Chen, C. Y., Wang, C. K., Lee, P. Y. & Lin, C. K., 12月 2007, 於: Materials Transactions. 48, 12, p. 3170-3175 6 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

3 引文斯高帕斯（Scopus）

Improvement of hydrogen absorption performances of mechanically alloyed Mg2Ni powders by water cooling

Chen, C. Y., Lin, S. K. & Lin, C. K., 4月 2007, 於: Materials Transactions. 48, 4, p. 842-846 5 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

3 引文斯高帕斯（Scopus）

Low temperature sintering and magnetic properties of garnet microwave magnetic materials

Tsay, C. Y., Lin, C. K., Cheng, H. C., Liu, K. S. & Lin, I. N., 10月 15 2007, 於: Materials Chemistry and Physics. 105, 2-3, p. 408-413 6 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

7 引文斯高帕斯（Scopus）

Manganese oxide films prepared by sol-gel process for supercapacitor application

Lin, C. K., Chuang, K. H., Lin, C. Y., Tsay, C. Y. & Chen, C. Y., 12月 15 2007, 於: Surface and Coatings Technology. 202, 4-7, p. 1272-1276 5 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

92 引文斯高帕斯（Scopus）

Performance of low resistivity electrode prepared by electroless plated for amorphous silicon thin-film transistors

Tsay, C. Y., Lin, C. K., Lin, H. M., Chang, S. C. & Chung, B. C., 2007, 於: Materials Science Forum. 561-565, PART 2, p. 1165-1168 4 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

3 引文斯高帕斯（Scopus）

Performance of sol-gel deposited Zn1 - xMgxO films used as active channel layer for thin-film transistors

Tsay, C. Y., Cheng, H. C., Wang, M. C., Lee, P. Y., Chen, C. F. & Lin, C. K., 12月 15 2007, 於: Surface and Coatings Technology. 202, 4-7, p. 1323-1328 6 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

34 引文斯高帕斯（Scopus）

Preparation and characterization of dual-phase bulk metallic glasses through powder metallurgy route

Lee, P. Y., Chung, S. T., Lin, C. K., Tsai, W. T. & Lin, H. M., 7月 2007, 於: Materials Transactions. 48, 7, p. 1595-1599 5 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

5 引文斯高帕斯（Scopus）

Stoichiometric study of iron sulfide prepared by mechanochemical reaction

Lin, C. K., Chen, C. Y., Lee, P. Y. & Chan, C. C., 2007, 於: Materials Science Forum. 561-565, PART 3, p. 2099-2102 4 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

3 引文斯高帕斯（Scopus）

The effect of Ti additions on the hydrogen absorption properties of mechanically alloyed Mg2Ni powders

Lin, C. K., Wang, C. K., Lee, P. Y., Lin, H. C. & Lin, K. M., 3月 25 2007, 於: Materials Science and Engineering A. 448-451, p. 1102-1106 5 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

12 引文斯高帕斯（Scopus）

The effect on the microstructures of electroless nickel coatings initiated by pulsating electric current

Lin, C. K., Hsu, H. T., Chen, C. T. & Yang, T. J., 12月 3 2007, 於: Thin Solid Films. 516, 2-4, p. 355-359 5 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

2 引文斯高帕斯（Scopus）

Thin-film transistors with Zn1-xMgxO active layers fabricated by sol-gel method

Chiang, S. C., Yu, C. C., Tsay, C. Y., Chuang, B. C., Wang, M. C., Lin, C. K., Ma, M. Y. & Ou, J. Y., 2007, IDMC 2007 - International Display Manufacturing Conference and FPD Expo - Proceedings. p. 884-887 4 p.

研究成果: 書貢獻/報告類型 › 會議貢獻

Tungsten oxide nanopowders and nanorods prepared by a modified plasma arc gas condensation technique

Su, C. Y., Yang, Z. K., Lin, H. C., Lin, C. K. & Chang, C. H., 2007, 2007 NSTI Nanotechnology Conference and Trade Show - NSTI Nanotech 2007, Technical Proceedings. 卷 4. p. 261-264 4 p.

研究成果: 書貢獻/報告類型 › 會議貢獻

1 引文斯高帕斯（Scopus）

2006

Characterization of elecrophoretically deposited nanocrystalline titanium dioxide films

Lin, C. K., Yang, T. J., Feng, Y. C., Tsung, T. T. & Su, C. Y., 2月 24 2006, 於: Surface and Coatings Technology. 200, 10 SPEC. ISS., p. 3184-3189 6 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

46 引文斯高帕斯（Scopus）

Characterization of nanocrystalline manganese oxide powders prepared by gas condensation technique

Lin, Z. K., Zhuang, K. H., Chen, J. Y., Cai, J. Y., Su, C. Y. & Lin, H. M., 12月 2006, 於: Guocheng Gongcheng Xuebao/The Chinese Journal of Process Engineering. 6, SUPPL. 2, p. 235-239 5 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

Formation and characterization of mechanically alloyed Ti-Cu-Ni-Sn bulk metallic glass composites

Jeng, I. K., Lin, C. K. & Lee, P. Y., 8月 2006, 於: Intermetallics. 14, 8-9, p. 957-961 5 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

12 引文斯高帕斯（Scopus）

Hydrogen storage properties of (Mg₂Ni)_100-xAg_x powder prepared by mechanical alloying

Chen, J. Y., Lin, X. K., Lin, Z. K. & Li, P. Y., 12月 2006, 於: Guocheng Gongcheng Xuebao/The Chinese Journal of Process Engineering. 6, SUPPL. 2, p. 258-262 5 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

Improvement in the characteristics of GaN-based light-emitting diodes by inserting A1GaN-GaN short-period superlattices in GaN underlayers

Wang, C. L., Gong, J. R., Yeh, M. F., Wu, B. J., Liao, W. T., Lin, T. Y. & Lin, C. K., 7月 15 2006, 於: IEEE Photonics Technology Letters. 18, 14, p. 1497-1499 3 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

7 引文斯高帕斯（Scopus）

Influence of the trench depths of grooved GaN templates on the characteristics of overgrown AlGaN films

Wang, C. L., Wang, W. L., Liao, W. T., Gong, J. R., Lin, C. K. & Lin, T. Y., 12月 29 2006, 於: Journal of Crystal Growth. 297, 2, p. 339-344 6 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

1 引文斯高帕斯（Scopus）

Mg-Y-Cu bulk metallic glass prepared by mechanical alloying and vacuum hot-pressing

Lee, P. Y., Kao, M. C., Lin, C. K. & Huang, J. C., 8月 2006, 於: Intermetallics. 14, 8-9, p. 994-999 6 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

15 引文斯高帕斯（Scopus）

On the characteristics of AlGaN films grown on (111) and (001) Si substrates

Wang, C. L., Gong, J. R., Liao, W. T., Wang, W. L., Lin, T. Y. & Lin, C. K., 1月 2006, 於: Solid State Communications. 137, 1-2, p. 63-66 4 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

2 引文斯高帕斯（Scopus）

Photocatalytic properties of nanocrystalline TiO₂ thin film with Ag additions

Chang, C-C., Lin, C. K., Chan, C. C., Hsu, C. S. & Chen, C. Y., 1月 3 2006, 於: Thin Solid Films. 494, 1-2, p. 274-278 5 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

62 引文斯高帕斯（Scopus）

Polymerization-like grafting of thermoplastic polyurethane by microwave plasma treatment

Su, C. Y., Lin, C. K., Lin, C. R. & Lin, C. H., 2月 24 2006, 於: Surface and Coatings Technology. 200, 10 SPEC. ISS., p. 3380-3384 5 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

15 引文斯高帕斯（Scopus）

Preparation and characterization of nanocrystalline porous TiO 2/WO3 composite thin films

Hsu, C. S., Lin, C. K., Chan, C. C., Chang, C-C. & Tsay, C. Y., 1月 3 2006, 於: Thin Solid Films. 494, 1-2, p. 228-233 6 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

36 引文斯高帕斯（Scopus）

The failure mechanism of diamond like coatings prepared by the filtered cathodic arc technique for minting application

Lin, W., Leu, M. S., Lin, C. K. & Su, C. Y., 12月 20 2006, 於: Surface and Coatings Technology. 201, 7 SPEC. ISS., p. 4430-4435 6 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

5 引文斯高帕斯（Scopus）

Thermal cyclic performance of NiAl/alumina-stabilized zirconia thermal barrier coatings deposited using a hybrid arc and magnetron sputtering system

Huang, K. J., Chang, J. T., Davison, A., Chen, K. C., He, J. L., Lin, C. K., Matthews, A. & Leyland, A., 12月 20 2006, 於: Surface and Coatings Technology. 201, 7 SPEC. ISS., p. 3901-3905 5 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

6 引文斯高帕斯（Scopus）

Tungsten oxide nanorods synthesized by a modified plasma arc gas condensation technique

Su, C. Y., Yang, Z. K., Lin, Z. K. & Lin, W., 12月 2006, 於: Guocheng Gongcheng Xuebao/The Chinese Journal of Process Engineering. 6, SUPPL. 2, p. 219-223 5 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

2005

A modified plasma arc gas condensation technique to synthesize nanocrystalline tungsten oxide powders

Su, C. Y., Lin, C. K. & Cheng, C. W., 5月 2005, 於: Materials Transactions. 46, 5, p. 1016-1020 5 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

13 引文斯高帕斯（Scopus）

A study of nanoparticle manufacturing process using vacuum submerged arc machining with aid of enhanced ultrasonic vibration

Chang, H., Tsung, T. T., Lo, C. H., Lin, H. M., Lin, C. K., Chen, L. C. & Jwo, C. S., 2月 2005, 於: Journal of Materials Science. 40, 4, p. 1005-1010 6 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

17 引文斯高帕斯（Scopus）

CNTs stabilize high temperature anatase phase of TiO2

Lin, K. N., Liou, W. J., Lin, H. M., Yang, T. Y. & Lin, C. K., 2005, 2005 5th IEEE Conference on Nanotechnology. 卷 2. p. 681-684 4 p. 1500808

研究成果: 書貢獻/報告類型 › 會議貢獻

1 引文斯高帕斯（Scopus）

Cu-Zr-Ti bulk metallic glass composites produced by mechanical alloying and vacuum hot-pressing

Wang, C. C., Lin, C. K., Lin, Y. L., Chen, J. S., Jen, R. R. & Lee, P. Y., 2005, 於: Materials Science Forum. 475-479, V, p. 3443-3450 8 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

12 引文斯高帕斯（Scopus）

Deposition of AlGaN films on (111) Si substrates and optimization of GaN growth on Si using intermediate-temperature AlGaN buffer layers

Wang, C. L., Gong, J. R., Liao, W. T., Lin, C. K. & Lin, T. Y., 12月 22 2005, 於: Thin Solid Films. 493, 1-2, p. 135-138 4 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

Effects of deposition and annealing atmospheres on phase transition of tungsten oxide films grown by ultra-high-vacuum reactive sputtering

Ghen, G. S., Liao, W. L., Chen, S. T., Su, W. C. & Lin, C. K., 12月 22 2005, 於: Thin Solid Films. 493, 1-2, p. 301-306 6 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

12 引文斯高帕斯（Scopus）

Glass forming ability in amorphous Ti50Cu35-xNi 15Snx alloys prepared by mechanical alloying

Lin, C. K., Hsu, C. C., Jeng, R. R., Lin, Y. L., Yen, C. H. & Lee, P. Y., 2005, 於: Materials Science Forum. 475-479, V, p. 3451-3458 8 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

6 引文斯高帕斯（Scopus）

Nanoparticle suspension preparation using the arc spray nanoparticle synthesis system combined with ultrasonic vibration and rotating electrode

Chang, H., Tsung, T. T., Yang, Y. C., Chen, L. C., Lin, H. M., Lin, C. K. & Jwo, C. S., 9月 2005, 於: International Journal of Advanced Manufacturing Technology. 26, 5-6, p. 552-558 7 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

51 引文斯高帕斯（Scopus）

Preparation of Mg-Y-Cu bulk metallic glass by high energy rail milling

Lee, P. Y., Kao, M. C. & Lin, C. K., 2005, 於: Journal of Metastable and Nanocrystalline Materials. 24-25, p. 97-100 4 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

Structure and hydrogen absorption property of Mg2Ni-Ti alloy powders prepared by mechanical alloying

Lin, C. K., Wang, C. K., Lin, H. C. & Lee, P. Y., 2005, 於: Journal of Metastable and Nanocrystalline Materials. 24-25, p. 419-422 4 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

2004

A study of magnetic field effect on nanofluid stability of CuO

Chang, H., Tsung, T. T., Lin, C. R., Lin, H. M., Lin, C. K., Lo, C. H. & Su, H. T., 4月 2004, 於: Materials Transactions. 45, 4, p. 1375-1378 4 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

27 引文斯高帕斯（Scopus）

Characterization of Ni₅₇Zr₂₀Ti₁₈Al ₅ amorphous powder obtained by mechanical alloying

Lee, P. Y., Lin, C. K., Jeng, I. K., Wang, C. C. & Chen, G. S., 4月 2004, 於: Materials Chemistry and Physics. 84, 2-3, p. 358-362 5 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

7 引文斯高帕斯（Scopus）

Phase transformation of tungsten films deposited by diode and inductively coupled plasma magnetron sputtering

Chen, G. S., Tian, H. S., Lin, C. K., Chen, G. S. & Lee, H. Y., 3月 2004, 於: Journal of Vacuum Science and Technology, Part A: Vacuum, Surfaces and Films. 22, 2, p. 281-286 6 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

14 引文斯高帕斯（Scopus）

Preparation and thermal stability of mechanically alloyed amorphous Ni-Zr-Ti-Si composites

Hsieh, J. T., Lin, C. K., Chen, J. S., Jeng, R. R., Lin, Y. L. & Lee, P. Y., 7月 2004, 於: Materials Science and Engineering A. 375-377, 1-2 SPEC. ISS., p. 820-824 5 p.

研究成果: 雜誌貢獻 › 文章 › 同行評審

3 引文斯高帕斯（Scopus）

林 中魁

研究成果

搜尋結果

林中魁