Using haptic technology to design computer assisted learning systems for dental casting training - In the case of melting palladium silver alloy with a dental lost-wax casting blow torch

Cheng-Yi Yang, Yu Sheng Lo, Chien Tsai Liu

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

A blow torch or blow pipe is the most frequently used in the dental lost-wax casting technique. However, adjustment of the blow pipe is dangerous and difficult to a certain degree and hence requires repeated practice to do it well. Beginners cannot practice by themselves and need guidance from a teacher. Otherwise it will result in casting failure and cost losses. In a worst scenario, it may also lead to a serious public safety accident. This study uses the computer assisted instruction (CAI) with the visual interface and Wii remote haptic wireless interactive device developed by Nintendo to effectively simulate blow pipe adjustment and establish an assisted casting training environment that is authentic, intuitive, and can effectively monitor the learning process for students to learn spontaneously, cut down the teaching cost, enhance operation safety, and reduce the teacher's burden.

Original languageEnglish
Title of host publication2009 International Conference on Education Technology and Computer, ICETC 2009
Pages145-151
Number of pages7
DOIs
Publication statusPublished - 2009
Event2009 International Conference on Education Technology and Computer, ICETC 2009 - Singapore, Singapore
Duration: Apr 17 2009Apr 20 2009

Other

Other2009 International Conference on Education Technology and Computer, ICETC 2009
CountrySingapore
CitySingapore
Period4/17/094/20/09

Fingerprint

Palladium alloys
Silver alloys
Waxes
Learning systems
Casting
Melting
Pipe
Interactive devices
teacher
costs
learning
learning process
accident
scenario
instruction
Interfaces (computer)
Costs
Accidents
Teaching
Students

Keywords

  • CAI
  • Dental Casting
  • Haptic Technology

ASJC Scopus subject areas

  • Software
  • Education

Cite this

Using haptic technology to design computer assisted learning systems for dental casting training - In the case of melting palladium silver alloy with a dental lost-wax casting blow torch. / Yang, Cheng-Yi; Lo, Yu Sheng; Liu, Chien Tsai.

2009 International Conference on Education Technology and Computer, ICETC 2009. 2009. p. 145-151 5169470.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Yang, C-Y, Lo, YS & Liu, CT 2009, Using haptic technology to design computer assisted learning systems for dental casting training - In the case of melting palladium silver alloy with a dental lost-wax casting blow torch. in 2009 International Conference on Education Technology and Computer, ICETC 2009., 5169470, pp. 145-151, 2009 International Conference on Education Technology and Computer, ICETC 2009, Singapore, Singapore, 4/17/09. https://doi.org/10.1109/ICETC.2009.68
Yang, Cheng-Yi ; Lo, Yu Sheng ; Liu, Chien Tsai. / Using haptic technology to design computer assisted learning systems for dental casting training - In the case of melting palladium silver alloy with a dental lost-wax casting blow torch. 2009 International Conference on Education Technology and Computer, ICETC 2009. 2009. pp. 145-151
@inproceedings{85bf99769b9148248bc9bf3cac24809d,
title = "Using haptic technology to design computer assisted learning systems for dental casting training - In the case of melting palladium silver alloy with a dental lost-wax casting blow torch",
abstract = "A blow torch or blow pipe is the most frequently used in the dental lost-wax casting technique. However, adjustment of the blow pipe is dangerous and difficult to a certain degree and hence requires repeated practice to do it well. Beginners cannot practice by themselves and need guidance from a teacher. Otherwise it will result in casting failure and cost losses. In a worst scenario, it may also lead to a serious public safety accident. This study uses the computer assisted instruction (CAI) with the visual interface and Wii remote haptic wireless interactive device developed by Nintendo to effectively simulate blow pipe adjustment and establish an assisted casting training environment that is authentic, intuitive, and can effectively monitor the learning process for students to learn spontaneously, cut down the teaching cost, enhance operation safety, and reduce the teacher's burden.",
keywords = "CAI, Dental Casting, Haptic Technology",
author = "Cheng-Yi Yang and Lo, {Yu Sheng} and Liu, {Chien Tsai}",
year = "2009",
doi = "10.1109/ICETC.2009.68",
language = "English",
isbn = "9780769536095",
pages = "145--151",
booktitle = "2009 International Conference on Education Technology and Computer, ICETC 2009",

}

TY - GEN

T1 - Using haptic technology to design computer assisted learning systems for dental casting training - In the case of melting palladium silver alloy with a dental lost-wax casting blow torch

AU - Yang, Cheng-Yi

AU - Lo, Yu Sheng

AU - Liu, Chien Tsai

PY - 2009

Y1 - 2009

N2 - A blow torch or blow pipe is the most frequently used in the dental lost-wax casting technique. However, adjustment of the blow pipe is dangerous and difficult to a certain degree and hence requires repeated practice to do it well. Beginners cannot practice by themselves and need guidance from a teacher. Otherwise it will result in casting failure and cost losses. In a worst scenario, it may also lead to a serious public safety accident. This study uses the computer assisted instruction (CAI) with the visual interface and Wii remote haptic wireless interactive device developed by Nintendo to effectively simulate blow pipe adjustment and establish an assisted casting training environment that is authentic, intuitive, and can effectively monitor the learning process for students to learn spontaneously, cut down the teaching cost, enhance operation safety, and reduce the teacher's burden.

AB - A blow torch or blow pipe is the most frequently used in the dental lost-wax casting technique. However, adjustment of the blow pipe is dangerous and difficult to a certain degree and hence requires repeated practice to do it well. Beginners cannot practice by themselves and need guidance from a teacher. Otherwise it will result in casting failure and cost losses. In a worst scenario, it may also lead to a serious public safety accident. This study uses the computer assisted instruction (CAI) with the visual interface and Wii remote haptic wireless interactive device developed by Nintendo to effectively simulate blow pipe adjustment and establish an assisted casting training environment that is authentic, intuitive, and can effectively monitor the learning process for students to learn spontaneously, cut down the teaching cost, enhance operation safety, and reduce the teacher's burden.

KW - CAI

KW - Dental Casting

KW - Haptic Technology

UR - http://www.scopus.com/inward/record.url?scp=70449652392&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=70449652392&partnerID=8YFLogxK

U2 - 10.1109/ICETC.2009.68

DO - 10.1109/ICETC.2009.68

M3 - Conference contribution

AN - SCOPUS:70449652392

SN - 9780769536095

SP - 145

EP - 151

BT - 2009 International Conference on Education Technology and Computer, ICETC 2009

ER -