Tissue-engineered vascular graft with co-culture of smooth muscle cells and human endothelial vein cells on an electrospun poly(Lactic-co-glycolic acid) microtube array membrane

Chee Ho Chew, Bo Long Sheu, Amanda Chen, Wan Ting Huang, Tsai Mu Cheng, Chun Ming Shih, Austin Chang, Chien Chung Chen

Research output: Contribution to journalArticlepeer-review

1 Citation (Scopus)

Abstract

Coronary artery disease is one of the major diseases that plagues today’s modern society. Conventional treatments utilize synthetic vascular grafts such as Dacron® and Teflon® in bypass graft surgery. Despite the wide adaptation, these synthetic grafts are often plagued with weaknesses such as low hemocompatibility, thrombosis, intimal hyperplasia, and risks of graft infection. More importantly, these synthetic grafts are not available at diameters of less than 6 mm. In view of these challenges, we strived to develop and adapt the electrospun Poly Lactic-co-Glycolic Acid (PLGA) Microtube Array Membrane (MTAM) vascular graft for applications smaller than 6 mm in diameter. Homogenously porous PLGA MTAMs were successfully electrospun at 5.5–8.5 kV under ambient conditions. Mechanically, the PLGA MTAMs registered a maximum tensile strength of 5.57 ± 0.85 MPa and Young’s modulus value of 1.134 ± 0.01 MPa; while MTT assay revealed that seven-day Smooth Muscle Cells (SMCs) and Human Umbilical Vein Endothelial Cells (HUVECs) registered a 6 times and 2.4 times higher cell viability when cultured in a co-culture setting in medium containing α-1 haptaglobulin. When rolled into a vascular graft, the PLGA MTAMs registered an overall degradation of 82% after 60 days of cell co-culture. After eight weeks of culturing, immunohisto-chemistry staining revealed the formation of a monolayer of HUVECs with tight junctions on the surface of the PLGA MTAM, and as for the SMCs housed within the lumens of the PLGA MTAMs, a monolayer with high degree of orientation was observed. The PLGA MTAM registered a burst pressure of 1092.2 ± 175.3 mmHg, which was sufficient for applications such as small diameter blood vessels. Potentially, the PLGA MTAM could be used as a suitable substrate for vascular engineering.

Original languageEnglish
Article number732
JournalMembranes
Volume11
Issue number10
DOIs
Publication statusPublished - Oct 2021

Keywords

  • Electrospin-ning
  • Human Endothelial Vein Cells (HUVECs)
  • Microtube array membrane (MTAM)
  • Poly(lactic-co-glycolic acid) (PLGA)
  • Smooth Muscle Cells (SMCs)
  • Tissue Engineered Vascular Grafts (TEVG)

ASJC Scopus subject areas

  • Chemical Engineering (miscellaneous)
  • Process Chemistry and Technology
  • Filtration and Separation

Fingerprint

Dive into the research topics of 'Tissue-engineered vascular graft with co-culture of smooth muscle cells and human endothelial vein cells on an electrospun poly(Lactic-co-glycolic acid) microtube array membrane'. Together they form a unique fingerprint.

Cite this