Resonance frequency detection of dental implant stability with various bone defects

In-vitro experiments

H. B. Zhuang, Ch S. Chen, S. Y. Lee, M. Ch Pan

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Resonance frequency analysis (RFA) has been applied to detect the stability and boundary condition of the dental implant osseointegration in several investigations. Its clinical relating application was generally accepted. Nevertheless, these studies only presented the overall phenomena of osseointegration around the implant and were unable to diagnose the location of the bone defect. Therefore, the aim of this study refers to an effective detection technique for locating the position of bone defect surrounding the dental implant. Various in-vitro bone defect models composed of a dental implant, a healing abutment and an artificial bone block were used to perform the experimental modal analysis (EMA). The bone defect model was excited by an impacted hammer; induced vibration response was acquired by an accelerometer and processed through a spectrum analyzer. The statistical analysis was used to generalize the relationship between the obtained RF values and various bone defects from experimental results. The finding of this study indicates that RF decreases remarkably when the range and depth of defects increase. Thus, the direction of the defect is decided first by RF variations of the sound and defective side, and the position of the defect is discriminated later by RF differences of various bone defect models. This conclusion assists doctors in diagnosis after surgery.

Original languageEnglish
Title of host publicationProceedings of the ASME Design Engineering Technical Conference
Pages765-772
Number of pages8
Volume1
EditionPARTS A AND B
DOIs
Publication statusPublished - 2010
Externally publishedYes
EventASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2009 - San Diego, CA, United States
Duration: Aug 30 2009Sep 2 2009

Other

OtherASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2009
CountryUnited States
CitySan Diego, CA
Period8/30/099/2/09

Fingerprint

Dental prostheses
Implant
Resonance Frequency
Bone
Defects
Experiment
Experiments
Spectrum analyzers
Frequency Analysis
Modal Analysis
Hammers
Accelerometer
Experimental Analysis
Modal analysis
Accelerometers
Stability Condition
Surgery
Statistical Analysis
Statistical methods
Vibration

ASJC Scopus subject areas

  • Mechanical Engineering
  • Computer Graphics and Computer-Aided Design
  • Computer Science Applications
  • Modelling and Simulation

Cite this

Zhuang, H. B., Chen, C. S., Lee, S. Y., & Pan, M. C. (2010). Resonance frequency detection of dental implant stability with various bone defects: In-vitro experiments. In Proceedings of the ASME Design Engineering Technical Conference (PARTS A AND B ed., Vol. 1, pp. 765-772) https://doi.org/10.1115/DETC2009-87744

Resonance frequency detection of dental implant stability with various bone defects : In-vitro experiments. / Zhuang, H. B.; Chen, Ch S.; Lee, S. Y.; Pan, M. Ch.

Proceedings of the ASME Design Engineering Technical Conference. Vol. 1 PARTS A AND B. ed. 2010. p. 765-772.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Zhuang, HB, Chen, CS, Lee, SY & Pan, MC 2010, Resonance frequency detection of dental implant stability with various bone defects: In-vitro experiments. in Proceedings of the ASME Design Engineering Technical Conference. PARTS A AND B edn, vol. 1, pp. 765-772, ASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2009, San Diego, CA, United States, 8/30/09. https://doi.org/10.1115/DETC2009-87744
Zhuang HB, Chen CS, Lee SY, Pan MC. Resonance frequency detection of dental implant stability with various bone defects: In-vitro experiments. In Proceedings of the ASME Design Engineering Technical Conference. PARTS A AND B ed. Vol. 1. 2010. p. 765-772 https://doi.org/10.1115/DETC2009-87744
Zhuang, H. B. ; Chen, Ch S. ; Lee, S. Y. ; Pan, M. Ch. / Resonance frequency detection of dental implant stability with various bone defects : In-vitro experiments. Proceedings of the ASME Design Engineering Technical Conference. Vol. 1 PARTS A AND B. ed. 2010. pp. 765-772
@inproceedings{187ad7fb7c9e476eb0a1ffada8121055,
title = "Resonance frequency detection of dental implant stability with various bone defects: In-vitro experiments",
abstract = "Resonance frequency analysis (RFA) has been applied to detect the stability and boundary condition of the dental implant osseointegration in several investigations. Its clinical relating application was generally accepted. Nevertheless, these studies only presented the overall phenomena of osseointegration around the implant and were unable to diagnose the location of the bone defect. Therefore, the aim of this study refers to an effective detection technique for locating the position of bone defect surrounding the dental implant. Various in-vitro bone defect models composed of a dental implant, a healing abutment and an artificial bone block were used to perform the experimental modal analysis (EMA). The bone defect model was excited by an impacted hammer; induced vibration response was acquired by an accelerometer and processed through a spectrum analyzer. The statistical analysis was used to generalize the relationship between the obtained RF values and various bone defects from experimental results. The finding of this study indicates that RF decreases remarkably when the range and depth of defects increase. Thus, the direction of the defect is decided first by RF variations of the sound and defective side, and the position of the defect is discriminated later by RF differences of various bone defect models. This conclusion assists doctors in diagnosis after surgery.",
author = "Zhuang, {H. B.} and Chen, {Ch S.} and Lee, {S. Y.} and Pan, {M. Ch}",
year = "2010",
doi = "10.1115/DETC2009-87744",
language = "English",
isbn = "9780791848982",
volume = "1",
pages = "765--772",
booktitle = "Proceedings of the ASME Design Engineering Technical Conference",
edition = "PARTS A AND B",

}

TY - GEN

T1 - Resonance frequency detection of dental implant stability with various bone defects

T2 - In-vitro experiments

AU - Zhuang, H. B.

AU - Chen, Ch S.

AU - Lee, S. Y.

AU - Pan, M. Ch

PY - 2010

Y1 - 2010

N2 - Resonance frequency analysis (RFA) has been applied to detect the stability and boundary condition of the dental implant osseointegration in several investigations. Its clinical relating application was generally accepted. Nevertheless, these studies only presented the overall phenomena of osseointegration around the implant and were unable to diagnose the location of the bone defect. Therefore, the aim of this study refers to an effective detection technique for locating the position of bone defect surrounding the dental implant. Various in-vitro bone defect models composed of a dental implant, a healing abutment and an artificial bone block were used to perform the experimental modal analysis (EMA). The bone defect model was excited by an impacted hammer; induced vibration response was acquired by an accelerometer and processed through a spectrum analyzer. The statistical analysis was used to generalize the relationship between the obtained RF values and various bone defects from experimental results. The finding of this study indicates that RF decreases remarkably when the range and depth of defects increase. Thus, the direction of the defect is decided first by RF variations of the sound and defective side, and the position of the defect is discriminated later by RF differences of various bone defect models. This conclusion assists doctors in diagnosis after surgery.

AB - Resonance frequency analysis (RFA) has been applied to detect the stability and boundary condition of the dental implant osseointegration in several investigations. Its clinical relating application was generally accepted. Nevertheless, these studies only presented the overall phenomena of osseointegration around the implant and were unable to diagnose the location of the bone defect. Therefore, the aim of this study refers to an effective detection technique for locating the position of bone defect surrounding the dental implant. Various in-vitro bone defect models composed of a dental implant, a healing abutment and an artificial bone block were used to perform the experimental modal analysis (EMA). The bone defect model was excited by an impacted hammer; induced vibration response was acquired by an accelerometer and processed through a spectrum analyzer. The statistical analysis was used to generalize the relationship between the obtained RF values and various bone defects from experimental results. The finding of this study indicates that RF decreases remarkably when the range and depth of defects increase. Thus, the direction of the defect is decided first by RF variations of the sound and defective side, and the position of the defect is discriminated later by RF differences of various bone defect models. This conclusion assists doctors in diagnosis after surgery.

UR - http://www.scopus.com/inward/record.url?scp=82155164541&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=82155164541&partnerID=8YFLogxK

U2 - 10.1115/DETC2009-87744

DO - 10.1115/DETC2009-87744

M3 - Conference contribution

SN - 9780791848982

VL - 1

SP - 765

EP - 772

BT - Proceedings of the ASME Design Engineering Technical Conference

ER -