Research of microstructure and mechanical behavior on duplex (α + β) Ti-4.8Al-2.5Mo-1.4V alloy

Pei Wen Peng, Keng Liang Ou, Chih Yeh Chao, Yung Ning Pan, Chau Hsiang Wang

Research output: Contribution to journalArticle

18 Citations (Scopus)

Abstract

The microstructure and mechanical behavior of the duplex Ti-4.8Al-2.5Mo-1.4V (Ti14) alloy were investigated by means of optical microscopy, electron microscopy, experimental model analysis, and hardness and tensile testing. During heat-treatment at between 600 and 1000 °C, the phase transformation sequence was found to be (α + β) → (α + β + α′) → (α′ + α″ + residual β). The (α′ + α″ + residual β) structure exhibited the maximum yield strength (σy = 920 MPa), hardness (HRC 36), and damping coefficient (188.3 × 10-4). However, the (α + β) structure achieved the greatest elongation (∼15%). It is believed that the lath-like α′ martensite not only increases the tensile strength, but also enhances the hardness of the Ti14 alloy. Moreover, it also plays a crucial role in increasing the damping capacity of the Ti14 alloy.

Original languageEnglish
Pages (from-to)661-666
Number of pages6
JournalJournal of Alloys and Compounds
Volume490
Issue number1-2
DOIs
Publication statusPublished - Feb 4 2010

Fingerprint

Microstructure
Damping
Hardness
Hardness testing
Tensile testing
Martensite
Electron microscopy
Optical microscopy
Yield stress
Elongation
Tensile strength
Phase transitions
Heat treatment

Keywords

  • Damping coefficient
  • Mechanical properties
  • Microstructure
  • Titanium alloy
  • Transmission electron microscopey

ASJC Scopus subject areas

  • Mechanical Engineering
  • Mechanics of Materials
  • Materials Chemistry
  • Metals and Alloys

Cite this

Research of microstructure and mechanical behavior on duplex (α + β) Ti-4.8Al-2.5Mo-1.4V alloy. / Peng, Pei Wen; Ou, Keng Liang; Chao, Chih Yeh; Pan, Yung Ning; Wang, Chau Hsiang.

In: Journal of Alloys and Compounds, Vol. 490, No. 1-2, 04.02.2010, p. 661-666.

Research output: Contribution to journalArticle

Peng, Pei Wen ; Ou, Keng Liang ; Chao, Chih Yeh ; Pan, Yung Ning ; Wang, Chau Hsiang. / Research of microstructure and mechanical behavior on duplex (α + β) Ti-4.8Al-2.5Mo-1.4V alloy. In: Journal of Alloys and Compounds. 2010 ; Vol. 490, No. 1-2. pp. 661-666.
@article{c5dd1cafd16640b49674a830c1daee90,
title = "Research of microstructure and mechanical behavior on duplex (α + β) Ti-4.8Al-2.5Mo-1.4V alloy",
abstract = "The microstructure and mechanical behavior of the duplex Ti-4.8Al-2.5Mo-1.4V (Ti14) alloy were investigated by means of optical microscopy, electron microscopy, experimental model analysis, and hardness and tensile testing. During heat-treatment at between 600 and 1000 °C, the phase transformation sequence was found to be (α + β) → (α + β + α′) → (α′ + α″ + residual β). The (α′ + α″ + residual β) structure exhibited the maximum yield strength (σy = 920 MPa), hardness (HRC 36), and damping coefficient (188.3 × 10-4). However, the (α + β) structure achieved the greatest elongation (∼15{\%}). It is believed that the lath-like α′ martensite not only increases the tensile strength, but also enhances the hardness of the Ti14 alloy. Moreover, it also plays a crucial role in increasing the damping capacity of the Ti14 alloy.",
keywords = "Damping coefficient, Mechanical properties, Microstructure, Titanium alloy, Transmission electron microscopey",
author = "Peng, {Pei Wen} and Ou, {Keng Liang} and Chao, {Chih Yeh} and Pan, {Yung Ning} and Wang, {Chau Hsiang}",
year = "2010",
month = "2",
day = "4",
doi = "10.1016/j.jallcom.2009.10.133",
language = "English",
volume = "490",
pages = "661--666",
journal = "Journal of Alloys and Compounds",
issn = "0925-8388",
publisher = "Elsevier",
number = "1-2",

}

TY - JOUR

T1 - Research of microstructure and mechanical behavior on duplex (α + β) Ti-4.8Al-2.5Mo-1.4V alloy

AU - Peng, Pei Wen

AU - Ou, Keng Liang

AU - Chao, Chih Yeh

AU - Pan, Yung Ning

AU - Wang, Chau Hsiang

PY - 2010/2/4

Y1 - 2010/2/4

N2 - The microstructure and mechanical behavior of the duplex Ti-4.8Al-2.5Mo-1.4V (Ti14) alloy were investigated by means of optical microscopy, electron microscopy, experimental model analysis, and hardness and tensile testing. During heat-treatment at between 600 and 1000 °C, the phase transformation sequence was found to be (α + β) → (α + β + α′) → (α′ + α″ + residual β). The (α′ + α″ + residual β) structure exhibited the maximum yield strength (σy = 920 MPa), hardness (HRC 36), and damping coefficient (188.3 × 10-4). However, the (α + β) structure achieved the greatest elongation (∼15%). It is believed that the lath-like α′ martensite not only increases the tensile strength, but also enhances the hardness of the Ti14 alloy. Moreover, it also plays a crucial role in increasing the damping capacity of the Ti14 alloy.

AB - The microstructure and mechanical behavior of the duplex Ti-4.8Al-2.5Mo-1.4V (Ti14) alloy were investigated by means of optical microscopy, electron microscopy, experimental model analysis, and hardness and tensile testing. During heat-treatment at between 600 and 1000 °C, the phase transformation sequence was found to be (α + β) → (α + β + α′) → (α′ + α″ + residual β). The (α′ + α″ + residual β) structure exhibited the maximum yield strength (σy = 920 MPa), hardness (HRC 36), and damping coefficient (188.3 × 10-4). However, the (α + β) structure achieved the greatest elongation (∼15%). It is believed that the lath-like α′ martensite not only increases the tensile strength, but also enhances the hardness of the Ti14 alloy. Moreover, it also plays a crucial role in increasing the damping capacity of the Ti14 alloy.

KW - Damping coefficient

KW - Mechanical properties

KW - Microstructure

KW - Titanium alloy

KW - Transmission electron microscopey

UR - http://www.scopus.com/inward/record.url?scp=74149087060&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=74149087060&partnerID=8YFLogxK

U2 - 10.1016/j.jallcom.2009.10.133

DO - 10.1016/j.jallcom.2009.10.133

M3 - Article

VL - 490

SP - 661

EP - 666

JO - Journal of Alloys and Compounds

JF - Journal of Alloys and Compounds

SN - 0925-8388

IS - 1-2

ER -