Quantitative correlation of the effects of crystallinity and additives on nanomorphology and solar cell performance of isoindigo-based copolymers

Chih Yu Chang, Yu Ching Huang, Cheng Si Tsao, Chien An Chen, Chun Jen Su, Wei Fang Su

Research output: Contribution to journalArticle

Abstract

The high power conversion efficiency of bulk heterojunction (BHJ) polymer solar cells can be achieved from either low crystallinity (P3TI) or high crystallinity (P6TI) of isoindigo-based donor-acceptor alternating copolymers blended with PC 71 BM by controlling nanophase separation using additives. P3TI shows similar device performance regardless of the type of additives, while P6TI is significantly affected by whether the additive is aliphatic or aromatic. To understand the interplays of crystallinity of polymers and the type of additive on the formation of nanomorphology of BHJ, we employed the simultaneous grazing-incidence small- and wide-angle X-ray scattering (GISAXS and GIWAXS) technique to perform the quantitative investigation. By incorporating additives, the PC 71 BM molecules can be easily intercalated into the P3TI polymer-rich domain and the size of the PC 71 BM clusters is reduced from about 24 nm to about 5 nm by either aliphatic 1,8-diiodooctane (DIO) or aromatic 1-chloronaphthalene (CN). On comparison, it is found to be more difficult for PC 71 BM molecules to be intercalated into the highly crystalline P6TI dense domain, and the PC 71 BM molecules have a higher tendency to be self-aggregated, which results in a larger size of PC 71 BM clusters of about 58 nm. The clusters can be reduced to about 7 nm by DIO and 13 nm by CN. The presence of crystallites in the P6TI domain can interact with the additive to tailor the crystallization of PC 71 BM clusters to a size similar to that of P6TI crystallites (∼12 nm) and form a connected network for efficient charge transportation. Thus, the power conversion efficiency of P6TI:PC 71 BM reaches its maximum of 7.04% using aromatic CN additives. This is a new finding of the effect of crystallinity, which is not observed in the common low crystalline donor-acceptor alternating copolymers such as PTB7. Our results provide a useful guideline to manipulate the desired morphology of BHJ films constructed from alternating copolymer with different crystallinity, which is critical for achieving high power conversion efficiency of solar cells.

Original languageEnglish
Pages (from-to)23515-23523
Number of pages9
JournalPhysical Chemistry Chemical Physics
Volume19
Issue number34
DOIs
Publication statusPublished - Jan 1 2017
Externally publishedYes

Fingerprint

crystallinity
copolymers
Solar cells
Copolymers
solar cells
cells
Conversion efficiency
Heterojunctions
heterojunctions
Crystallites
crystallites
Molecules
Polymers
polymers
Transportation charges
Crystalline materials
molecules
Crystallization
isoindigotin
X ray scattering

ASJC Scopus subject areas

  • Physics and Astronomy(all)
  • Physical and Theoretical Chemistry

Cite this

Quantitative correlation of the effects of crystallinity and additives on nanomorphology and solar cell performance of isoindigo-based copolymers. / Chang, Chih Yu; Huang, Yu Ching; Tsao, Cheng Si; Chen, Chien An; Su, Chun Jen; Su, Wei Fang.

In: Physical Chemistry Chemical Physics, Vol. 19, No. 34, 01.01.2017, p. 23515-23523.

Research output: Contribution to journalArticle

Chang, Chih Yu ; Huang, Yu Ching ; Tsao, Cheng Si ; Chen, Chien An ; Su, Chun Jen ; Su, Wei Fang. / Quantitative correlation of the effects of crystallinity and additives on nanomorphology and solar cell performance of isoindigo-based copolymers. In: Physical Chemistry Chemical Physics. 2017 ; Vol. 19, No. 34. pp. 23515-23523.
@article{9b56dfd6252c4bf4ac751d1c48eefd85,
title = "Quantitative correlation of the effects of crystallinity and additives on nanomorphology and solar cell performance of isoindigo-based copolymers",
abstract = "The high power conversion efficiency of bulk heterojunction (BHJ) polymer solar cells can be achieved from either low crystallinity (P3TI) or high crystallinity (P6TI) of isoindigo-based donor-acceptor alternating copolymers blended with PC 71 BM by controlling nanophase separation using additives. P3TI shows similar device performance regardless of the type of additives, while P6TI is significantly affected by whether the additive is aliphatic or aromatic. To understand the interplays of crystallinity of polymers and the type of additive on the formation of nanomorphology of BHJ, we employed the simultaneous grazing-incidence small- and wide-angle X-ray scattering (GISAXS and GIWAXS) technique to perform the quantitative investigation. By incorporating additives, the PC 71 BM molecules can be easily intercalated into the P3TI polymer-rich domain and the size of the PC 71 BM clusters is reduced from about 24 nm to about 5 nm by either aliphatic 1,8-diiodooctane (DIO) or aromatic 1-chloronaphthalene (CN). On comparison, it is found to be more difficult for PC 71 BM molecules to be intercalated into the highly crystalline P6TI dense domain, and the PC 71 BM molecules have a higher tendency to be self-aggregated, which results in a larger size of PC 71 BM clusters of about 58 nm. The clusters can be reduced to about 7 nm by DIO and 13 nm by CN. The presence of crystallites in the P6TI domain can interact with the additive to tailor the crystallization of PC 71 BM clusters to a size similar to that of P6TI crystallites (∼12 nm) and form a connected network for efficient charge transportation. Thus, the power conversion efficiency of P6TI:PC 71 BM reaches its maximum of 7.04{\%} using aromatic CN additives. This is a new finding of the effect of crystallinity, which is not observed in the common low crystalline donor-acceptor alternating copolymers such as PTB7. Our results provide a useful guideline to manipulate the desired morphology of BHJ films constructed from alternating copolymer with different crystallinity, which is critical for achieving high power conversion efficiency of solar cells.",
author = "Chang, {Chih Yu} and Huang, {Yu Ching} and Tsao, {Cheng Si} and Chen, {Chien An} and Su, {Chun Jen} and Su, {Wei Fang}",
year = "2017",
month = "1",
day = "1",
doi = "10.1039/c7cp04238h",
language = "English",
volume = "19",
pages = "23515--23523",
journal = "Physical Chemistry Chemical Physics",
issn = "1463-9076",
publisher = "Royal Society of Chemistry",
number = "34",

}

TY - JOUR

T1 - Quantitative correlation of the effects of crystallinity and additives on nanomorphology and solar cell performance of isoindigo-based copolymers

AU - Chang, Chih Yu

AU - Huang, Yu Ching

AU - Tsao, Cheng Si

AU - Chen, Chien An

AU - Su, Chun Jen

AU - Su, Wei Fang

PY - 2017/1/1

Y1 - 2017/1/1

N2 - The high power conversion efficiency of bulk heterojunction (BHJ) polymer solar cells can be achieved from either low crystallinity (P3TI) or high crystallinity (P6TI) of isoindigo-based donor-acceptor alternating copolymers blended with PC 71 BM by controlling nanophase separation using additives. P3TI shows similar device performance regardless of the type of additives, while P6TI is significantly affected by whether the additive is aliphatic or aromatic. To understand the interplays of crystallinity of polymers and the type of additive on the formation of nanomorphology of BHJ, we employed the simultaneous grazing-incidence small- and wide-angle X-ray scattering (GISAXS and GIWAXS) technique to perform the quantitative investigation. By incorporating additives, the PC 71 BM molecules can be easily intercalated into the P3TI polymer-rich domain and the size of the PC 71 BM clusters is reduced from about 24 nm to about 5 nm by either aliphatic 1,8-diiodooctane (DIO) or aromatic 1-chloronaphthalene (CN). On comparison, it is found to be more difficult for PC 71 BM molecules to be intercalated into the highly crystalline P6TI dense domain, and the PC 71 BM molecules have a higher tendency to be self-aggregated, which results in a larger size of PC 71 BM clusters of about 58 nm. The clusters can be reduced to about 7 nm by DIO and 13 nm by CN. The presence of crystallites in the P6TI domain can interact with the additive to tailor the crystallization of PC 71 BM clusters to a size similar to that of P6TI crystallites (∼12 nm) and form a connected network for efficient charge transportation. Thus, the power conversion efficiency of P6TI:PC 71 BM reaches its maximum of 7.04% using aromatic CN additives. This is a new finding of the effect of crystallinity, which is not observed in the common low crystalline donor-acceptor alternating copolymers such as PTB7. Our results provide a useful guideline to manipulate the desired morphology of BHJ films constructed from alternating copolymer with different crystallinity, which is critical for achieving high power conversion efficiency of solar cells.

AB - The high power conversion efficiency of bulk heterojunction (BHJ) polymer solar cells can be achieved from either low crystallinity (P3TI) or high crystallinity (P6TI) of isoindigo-based donor-acceptor alternating copolymers blended with PC 71 BM by controlling nanophase separation using additives. P3TI shows similar device performance regardless of the type of additives, while P6TI is significantly affected by whether the additive is aliphatic or aromatic. To understand the interplays of crystallinity of polymers and the type of additive on the formation of nanomorphology of BHJ, we employed the simultaneous grazing-incidence small- and wide-angle X-ray scattering (GISAXS and GIWAXS) technique to perform the quantitative investigation. By incorporating additives, the PC 71 BM molecules can be easily intercalated into the P3TI polymer-rich domain and the size of the PC 71 BM clusters is reduced from about 24 nm to about 5 nm by either aliphatic 1,8-diiodooctane (DIO) or aromatic 1-chloronaphthalene (CN). On comparison, it is found to be more difficult for PC 71 BM molecules to be intercalated into the highly crystalline P6TI dense domain, and the PC 71 BM molecules have a higher tendency to be self-aggregated, which results in a larger size of PC 71 BM clusters of about 58 nm. The clusters can be reduced to about 7 nm by DIO and 13 nm by CN. The presence of crystallites in the P6TI domain can interact with the additive to tailor the crystallization of PC 71 BM clusters to a size similar to that of P6TI crystallites (∼12 nm) and form a connected network for efficient charge transportation. Thus, the power conversion efficiency of P6TI:PC 71 BM reaches its maximum of 7.04% using aromatic CN additives. This is a new finding of the effect of crystallinity, which is not observed in the common low crystalline donor-acceptor alternating copolymers such as PTB7. Our results provide a useful guideline to manipulate the desired morphology of BHJ films constructed from alternating copolymer with different crystallinity, which is critical for achieving high power conversion efficiency of solar cells.

UR - http://www.scopus.com/inward/record.url?scp=85028688102&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85028688102&partnerID=8YFLogxK

U2 - 10.1039/c7cp04238h

DO - 10.1039/c7cp04238h

M3 - Article

VL - 19

SP - 23515

EP - 23523

JO - Physical Chemistry Chemical Physics

JF - Physical Chemistry Chemical Physics

SN - 1463-9076

IS - 34

ER -