Photovoltaics battery module power supply system with CIGS film applied in portable devices

Jian Chiun Liou, Cheng Fu Yang

Research output: Contribution to journalArticle

Abstract

In this paper, we present a photovoltaics system with a Cu (In, Ga) (S, Se)2 (CIGS) film that can be applied in portable power devices for electronic products. The primary material of the major photovoltaics film layer is CIGS thin film. The photovoltaics system is made on an AZO/ZnO/CdS/CIGS/Mo/flexible substrate. An SEM photo of the CIGS/Mo/flexible substrate is shown in the results. All of these technologies typically use low-temperature deposition techniques. Although advances in the low-temperature deposition of CIGS cells have eliminated this performance difference, the best performance is usually from batteries deposited on a flexible substrate. The parameters of the two samples contain the total area of the deposited CIGS material and the photocurrent generated by the image. An area of 1.043 cm2 can produce a current of 0.0324 A, while an area of 225.2 cm2 can produce a current of 6.6035 A.

Original languageEnglish
Pages (from-to)96-103
Number of pages8
JournalMicroelectronics Reliability
Volume99
DOIs
Publication statusPublished - Aug 1 2019

Keywords

  • Cu (In, Ga) (S, Se) (CIGS) solar cell
  • Performance
  • Photovoltaics
  • Portable device

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Atomic and Molecular Physics, and Optics
  • Condensed Matter Physics
  • Safety, Risk, Reliability and Quality
  • Surfaces, Coatings and Films
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'Photovoltaics battery module power supply system with CIGS film applied in portable devices'. Together they form a unique fingerprint.

  • Cite this