Novel design of osmotic chitosan capsules characterized by asymmetric membrane structure for in situ formation of delivery orifice

Gen Ming Wang, Chien Ho Chen, Hsiu O. Ho, Sheng Shi Wang, Ming Thau Sheu

Research output: Contribution to journalArticle

10 Citations (Scopus)

Abstract

In this study, chitosan capsules with asymmetric membrane to induce osmotic effects and in situ formation of the delivery orifice were optimally prepared and characterized. Chitosan capsules were formed on stainless steel mold pins by dipping the pins into a chitosan solution followed by forming asymmetric structure by dipping into a quenching solution containing tripolyphosphate (TPP) to cause an ionic cross-linking reaction between the outer layer of chitosan and TPP. Factors influencing the properties of the capsule membrane, such as the molecular weight of chitosan, the dipping solution and dipping time, and the quenching solution and time, were optimized to successfully produce osmotic chitosan capsules with asymmetric membrane using chitosans that possessed different viscosities. In situ formation of a delivery orifice on the asymmetric membrane of the chitosan capsule was proven by the observation of a jet stream of chlorophyll being released from the capsule. Drugs with different solubility were selected, and a linear correlation between drug solubility and the initial drug release rate calculated from the slope of the drug release profile was used to verify that the delivery orifices that were in situ formed on the asymmetric membrane of the chitosan capsules induced by osmotic effect was responsible for the drug release. Water permeability across the optimally produced asymmetric membrane of the capsule from chitosan of 500 cps (300-700 cps) quenched with TPP for 30 min (C500/TPP30) was determined to be 1.40 × 10-6 cm2 h-1 atm-1 at 37.0 ± 0.5 °C. The encapsulation of poorly water-soluble drugs, felodipine (FE) and nifedipine (NF), in such an asymmetric chitosan capsule was capable of creating a sufficient osmotic effect to activate the release of the drug with the addition of SLS and HPMC. The multiple regression equations of maximal release percent at 24 h for FE and NF confirmed that both sodium lauryl sulfate (SLS) and hydroxypropyl methylcellulose (HPMC) positively influenced this response factor, and the effect of SLS was greater than that of HPMC.

Original languageEnglish
Pages (from-to)71-81
Number of pages11
JournalInternational Journal of Pharmaceutics
Volume319
Issue number1-2
DOIs
Publication statusPublished - Aug 17 2006

Fingerprint

Chitosan
Capsules
Membranes
Sodium Dodecyl Sulfate
Felodipine
Nifedipine
Solubility
Pharmaceutical Preparations
Water
Stainless Steel
Cross Reactions
Chlorophyll
Viscosity
Permeability
Fungi
Molecular Weight
Observation

Keywords

  • Asymmetric membrane
  • Chitosan
  • In situ orifice formation
  • Osmotic
  • Poorly soluble drugs

ASJC Scopus subject areas

  • Pharmaceutical Science

Cite this

Novel design of osmotic chitosan capsules characterized by asymmetric membrane structure for in situ formation of delivery orifice. / Wang, Gen Ming; Chen, Chien Ho; Ho, Hsiu O.; Wang, Sheng Shi; Sheu, Ming Thau.

In: International Journal of Pharmaceutics, Vol. 319, No. 1-2, 17.08.2006, p. 71-81.

Research output: Contribution to journalArticle

@article{4773d195996c44e48a0f88e720964f67,
title = "Novel design of osmotic chitosan capsules characterized by asymmetric membrane structure for in situ formation of delivery orifice",
abstract = "In this study, chitosan capsules with asymmetric membrane to induce osmotic effects and in situ formation of the delivery orifice were optimally prepared and characterized. Chitosan capsules were formed on stainless steel mold pins by dipping the pins into a chitosan solution followed by forming asymmetric structure by dipping into a quenching solution containing tripolyphosphate (TPP) to cause an ionic cross-linking reaction between the outer layer of chitosan and TPP. Factors influencing the properties of the capsule membrane, such as the molecular weight of chitosan, the dipping solution and dipping time, and the quenching solution and time, were optimized to successfully produce osmotic chitosan capsules with asymmetric membrane using chitosans that possessed different viscosities. In situ formation of a delivery orifice on the asymmetric membrane of the chitosan capsule was proven by the observation of a jet stream of chlorophyll being released from the capsule. Drugs with different solubility were selected, and a linear correlation between drug solubility and the initial drug release rate calculated from the slope of the drug release profile was used to verify that the delivery orifices that were in situ formed on the asymmetric membrane of the chitosan capsules induced by osmotic effect was responsible for the drug release. Water permeability across the optimally produced asymmetric membrane of the capsule from chitosan of 500 cps (300-700 cps) quenched with TPP for 30 min (C500/TPP30) was determined to be 1.40 × 10-6 cm2 h-1 atm-1 at 37.0 ± 0.5 °C. The encapsulation of poorly water-soluble drugs, felodipine (FE) and nifedipine (NF), in such an asymmetric chitosan capsule was capable of creating a sufficient osmotic effect to activate the release of the drug with the addition of SLS and HPMC. The multiple regression equations of maximal release percent at 24 h for FE and NF confirmed that both sodium lauryl sulfate (SLS) and hydroxypropyl methylcellulose (HPMC) positively influenced this response factor, and the effect of SLS was greater than that of HPMC.",
keywords = "Asymmetric membrane, Chitosan, In situ orifice formation, Osmotic, Poorly soluble drugs",
author = "Wang, {Gen Ming} and Chen, {Chien Ho} and Ho, {Hsiu O.} and Wang, {Sheng Shi} and Sheu, {Ming Thau}",
year = "2006",
month = "8",
day = "17",
doi = "10.1016/j.ijpharm.2006.03.041",
language = "English",
volume = "319",
pages = "71--81",
journal = "International Journal of Pharmaceutics",
issn = "0378-5173",
publisher = "Elsevier",
number = "1-2",

}

TY - JOUR

T1 - Novel design of osmotic chitosan capsules characterized by asymmetric membrane structure for in situ formation of delivery orifice

AU - Wang, Gen Ming

AU - Chen, Chien Ho

AU - Ho, Hsiu O.

AU - Wang, Sheng Shi

AU - Sheu, Ming Thau

PY - 2006/8/17

Y1 - 2006/8/17

N2 - In this study, chitosan capsules with asymmetric membrane to induce osmotic effects and in situ formation of the delivery orifice were optimally prepared and characterized. Chitosan capsules were formed on stainless steel mold pins by dipping the pins into a chitosan solution followed by forming asymmetric structure by dipping into a quenching solution containing tripolyphosphate (TPP) to cause an ionic cross-linking reaction between the outer layer of chitosan and TPP. Factors influencing the properties of the capsule membrane, such as the molecular weight of chitosan, the dipping solution and dipping time, and the quenching solution and time, were optimized to successfully produce osmotic chitosan capsules with asymmetric membrane using chitosans that possessed different viscosities. In situ formation of a delivery orifice on the asymmetric membrane of the chitosan capsule was proven by the observation of a jet stream of chlorophyll being released from the capsule. Drugs with different solubility were selected, and a linear correlation between drug solubility and the initial drug release rate calculated from the slope of the drug release profile was used to verify that the delivery orifices that were in situ formed on the asymmetric membrane of the chitosan capsules induced by osmotic effect was responsible for the drug release. Water permeability across the optimally produced asymmetric membrane of the capsule from chitosan of 500 cps (300-700 cps) quenched with TPP for 30 min (C500/TPP30) was determined to be 1.40 × 10-6 cm2 h-1 atm-1 at 37.0 ± 0.5 °C. The encapsulation of poorly water-soluble drugs, felodipine (FE) and nifedipine (NF), in such an asymmetric chitosan capsule was capable of creating a sufficient osmotic effect to activate the release of the drug with the addition of SLS and HPMC. The multiple regression equations of maximal release percent at 24 h for FE and NF confirmed that both sodium lauryl sulfate (SLS) and hydroxypropyl methylcellulose (HPMC) positively influenced this response factor, and the effect of SLS was greater than that of HPMC.

AB - In this study, chitosan capsules with asymmetric membrane to induce osmotic effects and in situ formation of the delivery orifice were optimally prepared and characterized. Chitosan capsules were formed on stainless steel mold pins by dipping the pins into a chitosan solution followed by forming asymmetric structure by dipping into a quenching solution containing tripolyphosphate (TPP) to cause an ionic cross-linking reaction between the outer layer of chitosan and TPP. Factors influencing the properties of the capsule membrane, such as the molecular weight of chitosan, the dipping solution and dipping time, and the quenching solution and time, were optimized to successfully produce osmotic chitosan capsules with asymmetric membrane using chitosans that possessed different viscosities. In situ formation of a delivery orifice on the asymmetric membrane of the chitosan capsule was proven by the observation of a jet stream of chlorophyll being released from the capsule. Drugs with different solubility were selected, and a linear correlation between drug solubility and the initial drug release rate calculated from the slope of the drug release profile was used to verify that the delivery orifices that were in situ formed on the asymmetric membrane of the chitosan capsules induced by osmotic effect was responsible for the drug release. Water permeability across the optimally produced asymmetric membrane of the capsule from chitosan of 500 cps (300-700 cps) quenched with TPP for 30 min (C500/TPP30) was determined to be 1.40 × 10-6 cm2 h-1 atm-1 at 37.0 ± 0.5 °C. The encapsulation of poorly water-soluble drugs, felodipine (FE) and nifedipine (NF), in such an asymmetric chitosan capsule was capable of creating a sufficient osmotic effect to activate the release of the drug with the addition of SLS and HPMC. The multiple regression equations of maximal release percent at 24 h for FE and NF confirmed that both sodium lauryl sulfate (SLS) and hydroxypropyl methylcellulose (HPMC) positively influenced this response factor, and the effect of SLS was greater than that of HPMC.

KW - Asymmetric membrane

KW - Chitosan

KW - In situ orifice formation

KW - Osmotic

KW - Poorly soluble drugs

UR - http://www.scopus.com/inward/record.url?scp=33745913907&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33745913907&partnerID=8YFLogxK

U2 - 10.1016/j.ijpharm.2006.03.041

DO - 10.1016/j.ijpharm.2006.03.041

M3 - Article

C2 - 16701971

AN - SCOPUS:33745913907

VL - 319

SP - 71

EP - 81

JO - International Journal of Pharmaceutics

JF - International Journal of Pharmaceutics

SN - 0378-5173

IS - 1-2

ER -