Light converting inorganic phosphors for white light-emitting diodes

Lei Chen, Chun Che Lin, Chiao Wen Yeh, Ru Shi Liu

Research output: Contribution to journalReview article

340 Citations (Scopus)

Abstract

White light-emitting diodes (WLEDs) have matched the emission efficiency of florescent lights and will rapidly spread as light source for homes and offices in the next 5 to 10 years. WLEDs provide a light element having a semiconductor light emitting layer (blue or near-ultraviolet (nUV) LEDs) and photoluminescence phosphors. These solidstate LED lamps, rather than organic light emitting diode (OLED) or polymer lightemitting diode (PLED), have a number of advantages over conventional incandescent bulbs and halogen lamps, such as high efficiency to convert electrical energy into light, reliability and long operating lifetime. To meet with the further requirement of high color rendering index, warm light with low color temperature, high thermal stability and higher energy efficiency for WLEDs, new phosphors that can absorb excitation energy from blue or nUV LEDs and generate visible emissions efficiently are desired. The criteria of choosing the best phosphors, for blue (450-480 nm) and nUV (380-400 nm) LEDs, strongly depends on the absorption and emission of the phosphors. Moreover, the balance of light between the emission from blue-nUV LEDs and the emissions from phosphors (such as yellow from Y3Al5O12:Ce3+) is important to obtain white light with proper color rendering index and color temperature. Here, we will review the status of phosphors for LEDs and prospect the future development.

Original languageEnglish
Pages (from-to)2172-2195
Number of pages24
JournalMaterials
Volume3
Issue number3
DOIs
Publication statusPublished - Dec 1 2010
Externally publishedYes

Fingerprint

Phosphors
Light emitting diodes
Color
Electric lamps
Halogens
Excitation energy
Organic light emitting diodes (OLED)
Energy efficiency
Light sources
Photoluminescence
Polymers
Diodes
Thermodynamic stability
Semiconductor materials
Temperature

Keywords

  • Color rendering index (Ra)
  • Light-emitting diode (LED)
  • Luminescence efficiency
  • Phosphors
  • Thermal stability

ASJC Scopus subject areas

  • Materials Science(all)

Cite this

Light converting inorganic phosphors for white light-emitting diodes. / Chen, Lei; Lin, Chun Che; Yeh, Chiao Wen; Liu, Ru Shi.

In: Materials, Vol. 3, No. 3, 01.12.2010, p. 2172-2195.

Research output: Contribution to journalReview article

Chen, Lei ; Lin, Chun Che ; Yeh, Chiao Wen ; Liu, Ru Shi. / Light converting inorganic phosphors for white light-emitting diodes. In: Materials. 2010 ; Vol. 3, No. 3. pp. 2172-2195.
@article{16c085b6465e4164a4e4e4cba2dfbf1a,
title = "Light converting inorganic phosphors for white light-emitting diodes",
abstract = "White light-emitting diodes (WLEDs) have matched the emission efficiency of florescent lights and will rapidly spread as light source for homes and offices in the next 5 to 10 years. WLEDs provide a light element having a semiconductor light emitting layer (blue or near-ultraviolet (nUV) LEDs) and photoluminescence phosphors. These solidstate LED lamps, rather than organic light emitting diode (OLED) or polymer lightemitting diode (PLED), have a number of advantages over conventional incandescent bulbs and halogen lamps, such as high efficiency to convert electrical energy into light, reliability and long operating lifetime. To meet with the further requirement of high color rendering index, warm light with low color temperature, high thermal stability and higher energy efficiency for WLEDs, new phosphors that can absorb excitation energy from blue or nUV LEDs and generate visible emissions efficiently are desired. The criteria of choosing the best phosphors, for blue (450-480 nm) and nUV (380-400 nm) LEDs, strongly depends on the absorption and emission of the phosphors. Moreover, the balance of light between the emission from blue-nUV LEDs and the emissions from phosphors (such as yellow from Y3Al5O12:Ce3+) is important to obtain white light with proper color rendering index and color temperature. Here, we will review the status of phosphors for LEDs and prospect the future development.",
keywords = "Color rendering index (Ra), Light-emitting diode (LED), Luminescence efficiency, Phosphors, Thermal stability",
author = "Lei Chen and Lin, {Chun Che} and Yeh, {Chiao Wen} and Liu, {Ru Shi}",
year = "2010",
month = "12",
day = "1",
doi = "10.3390/ma3032172",
language = "English",
volume = "3",
pages = "2172--2195",
journal = "Materials",
issn = "1996-1944",
publisher = "MDPI AG",
number = "3",

}

TY - JOUR

T1 - Light converting inorganic phosphors for white light-emitting diodes

AU - Chen, Lei

AU - Lin, Chun Che

AU - Yeh, Chiao Wen

AU - Liu, Ru Shi

PY - 2010/12/1

Y1 - 2010/12/1

N2 - White light-emitting diodes (WLEDs) have matched the emission efficiency of florescent lights and will rapidly spread as light source for homes and offices in the next 5 to 10 years. WLEDs provide a light element having a semiconductor light emitting layer (blue or near-ultraviolet (nUV) LEDs) and photoluminescence phosphors. These solidstate LED lamps, rather than organic light emitting diode (OLED) or polymer lightemitting diode (PLED), have a number of advantages over conventional incandescent bulbs and halogen lamps, such as high efficiency to convert electrical energy into light, reliability and long operating lifetime. To meet with the further requirement of high color rendering index, warm light with low color temperature, high thermal stability and higher energy efficiency for WLEDs, new phosphors that can absorb excitation energy from blue or nUV LEDs and generate visible emissions efficiently are desired. The criteria of choosing the best phosphors, for blue (450-480 nm) and nUV (380-400 nm) LEDs, strongly depends on the absorption and emission of the phosphors. Moreover, the balance of light between the emission from blue-nUV LEDs and the emissions from phosphors (such as yellow from Y3Al5O12:Ce3+) is important to obtain white light with proper color rendering index and color temperature. Here, we will review the status of phosphors for LEDs and prospect the future development.

AB - White light-emitting diodes (WLEDs) have matched the emission efficiency of florescent lights and will rapidly spread as light source for homes and offices in the next 5 to 10 years. WLEDs provide a light element having a semiconductor light emitting layer (blue or near-ultraviolet (nUV) LEDs) and photoluminescence phosphors. These solidstate LED lamps, rather than organic light emitting diode (OLED) or polymer lightemitting diode (PLED), have a number of advantages over conventional incandescent bulbs and halogen lamps, such as high efficiency to convert electrical energy into light, reliability and long operating lifetime. To meet with the further requirement of high color rendering index, warm light with low color temperature, high thermal stability and higher energy efficiency for WLEDs, new phosphors that can absorb excitation energy from blue or nUV LEDs and generate visible emissions efficiently are desired. The criteria of choosing the best phosphors, for blue (450-480 nm) and nUV (380-400 nm) LEDs, strongly depends on the absorption and emission of the phosphors. Moreover, the balance of light between the emission from blue-nUV LEDs and the emissions from phosphors (such as yellow from Y3Al5O12:Ce3+) is important to obtain white light with proper color rendering index and color temperature. Here, we will review the status of phosphors for LEDs and prospect the future development.

KW - Color rendering index (Ra)

KW - Light-emitting diode (LED)

KW - Luminescence efficiency

KW - Phosphors

KW - Thermal stability

UR - http://www.scopus.com/inward/record.url?scp=78649237050&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=78649237050&partnerID=8YFLogxK

U2 - 10.3390/ma3032172

DO - 10.3390/ma3032172

M3 - Review article

VL - 3

SP - 2172

EP - 2195

JO - Materials

JF - Materials

SN - 1996-1944

IS - 3

ER -