Influence of hydrogen charging on the formation of nanostructural titania by anodizing with cathodic pretreatment

Hsin Chung Cheng, Sheng Yang Lee, Chang Chih Chen, Yih Chuen Shyng, Keng Liang Ou

Research output: Contribution to journalArticle

31 Citations (Scopus)

Abstract

The purpose of the present study was to evaluate the influences of titanium hydride on the formation of nanostructural titanium oxide by electrochemical treatment. The physico-chemical surface properties were investigated by scanning electron microscopy, cross-sectional transmission electron microscopy, thin film X-ray diffractometry, and X-ray photoelectron spectroscopy. Nanoporous structures were formed after anodization with cathodic pretreatments. The titanium hydride is formed by cathodic pretreatments. Titanium hydride was a sacrificial layer on titanium following anodization. The sacrificial layer has a γ-Ti H2 phase. The γ-Ti H2 is a tetragonal nanostructure and its lattice constant is a=3.12 nm. Furthermore, it was formed within titanium matrices during cathodization. The nanostructural γ-Ti H2 decomposes after anodization. Furthermore, the nanoporous Ti formed by dissolution of Ti H2 was changed to nanoporous Ti O2. The Ti H2 plays an important role in forming nanoporous Ti O2. The triangle-like γ-Ti H2 was observed on the Ti matrix and grain boundary. In the γ-Ti matrix, an γ-Ti→γ-Ti H2 transition occurred during cathodization. The anodization with cathodic pretreatment not only produces titanium hydride layer, but also results in formation of nanostructural titanium oxide. Nanoporous titania can be enhanced osseointegration of implant such as orthopedic and dental implants.

Original languageEnglish
JournalJournal of the Electrochemical Society
Volume154
Issue number1
DOIs
Publication statusPublished - 2007

Fingerprint

anodizing
Anodic oxidation
Titanium
pretreatment
charging
Hydrogen
titanium
Hydrides
hydrogen
hydrides
Titanium oxides
titanium oxides
matrices
Dental prostheses
Orthopedics
orthopedics
X ray diffraction analysis
Lattice constants
Surface properties
titanium dioxide

ASJC Scopus subject areas

  • Electrochemistry
  • Surfaces, Coatings and Films
  • Surfaces and Interfaces

Cite this

Influence of hydrogen charging on the formation of nanostructural titania by anodizing with cathodic pretreatment. / Cheng, Hsin Chung; Lee, Sheng Yang; Chen, Chang Chih; Shyng, Yih Chuen; Ou, Keng Liang.

In: Journal of the Electrochemical Society, Vol. 154, No. 1, 2007.

Research output: Contribution to journalArticle

@article{5813c7b6608341c3937b41611634efc4,
title = "Influence of hydrogen charging on the formation of nanostructural titania by anodizing with cathodic pretreatment",
abstract = "The purpose of the present study was to evaluate the influences of titanium hydride on the formation of nanostructural titanium oxide by electrochemical treatment. The physico-chemical surface properties were investigated by scanning electron microscopy, cross-sectional transmission electron microscopy, thin film X-ray diffractometry, and X-ray photoelectron spectroscopy. Nanoporous structures were formed after anodization with cathodic pretreatments. The titanium hydride is formed by cathodic pretreatments. Titanium hydride was a sacrificial layer on titanium following anodization. The sacrificial layer has a γ-Ti H2 phase. The γ-Ti H2 is a tetragonal nanostructure and its lattice constant is a=3.12 nm. Furthermore, it was formed within titanium matrices during cathodization. The nanostructural γ-Ti H2 decomposes after anodization. Furthermore, the nanoporous Ti formed by dissolution of Ti H2 was changed to nanoporous Ti O2. The Ti H2 plays an important role in forming nanoporous Ti O2. The triangle-like γ-Ti H2 was observed on the Ti matrix and grain boundary. In the γ-Ti matrix, an γ-Ti→γ-Ti H2 transition occurred during cathodization. The anodization with cathodic pretreatment not only produces titanium hydride layer, but also results in formation of nanostructural titanium oxide. Nanoporous titania can be enhanced osseointegration of implant such as orthopedic and dental implants.",
author = "Cheng, {Hsin Chung} and Lee, {Sheng Yang} and Chen, {Chang Chih} and Shyng, {Yih Chuen} and Ou, {Keng Liang}",
year = "2007",
doi = "10.1149/1.2386947",
language = "English",
volume = "154",
journal = "Journal of the Electrochemical Society",
issn = "0013-4651",
publisher = "Electrochemical Society, Inc.",
number = "1",

}

TY - JOUR

T1 - Influence of hydrogen charging on the formation of nanostructural titania by anodizing with cathodic pretreatment

AU - Cheng, Hsin Chung

AU - Lee, Sheng Yang

AU - Chen, Chang Chih

AU - Shyng, Yih Chuen

AU - Ou, Keng Liang

PY - 2007

Y1 - 2007

N2 - The purpose of the present study was to evaluate the influences of titanium hydride on the formation of nanostructural titanium oxide by electrochemical treatment. The physico-chemical surface properties were investigated by scanning electron microscopy, cross-sectional transmission electron microscopy, thin film X-ray diffractometry, and X-ray photoelectron spectroscopy. Nanoporous structures were formed after anodization with cathodic pretreatments. The titanium hydride is formed by cathodic pretreatments. Titanium hydride was a sacrificial layer on titanium following anodization. The sacrificial layer has a γ-Ti H2 phase. The γ-Ti H2 is a tetragonal nanostructure and its lattice constant is a=3.12 nm. Furthermore, it was formed within titanium matrices during cathodization. The nanostructural γ-Ti H2 decomposes after anodization. Furthermore, the nanoporous Ti formed by dissolution of Ti H2 was changed to nanoporous Ti O2. The Ti H2 plays an important role in forming nanoporous Ti O2. The triangle-like γ-Ti H2 was observed on the Ti matrix and grain boundary. In the γ-Ti matrix, an γ-Ti→γ-Ti H2 transition occurred during cathodization. The anodization with cathodic pretreatment not only produces titanium hydride layer, but also results in formation of nanostructural titanium oxide. Nanoporous titania can be enhanced osseointegration of implant such as orthopedic and dental implants.

AB - The purpose of the present study was to evaluate the influences of titanium hydride on the formation of nanostructural titanium oxide by electrochemical treatment. The physico-chemical surface properties were investigated by scanning electron microscopy, cross-sectional transmission electron microscopy, thin film X-ray diffractometry, and X-ray photoelectron spectroscopy. Nanoporous structures were formed after anodization with cathodic pretreatments. The titanium hydride is formed by cathodic pretreatments. Titanium hydride was a sacrificial layer on titanium following anodization. The sacrificial layer has a γ-Ti H2 phase. The γ-Ti H2 is a tetragonal nanostructure and its lattice constant is a=3.12 nm. Furthermore, it was formed within titanium matrices during cathodization. The nanostructural γ-Ti H2 decomposes after anodization. Furthermore, the nanoporous Ti formed by dissolution of Ti H2 was changed to nanoporous Ti O2. The Ti H2 plays an important role in forming nanoporous Ti O2. The triangle-like γ-Ti H2 was observed on the Ti matrix and grain boundary. In the γ-Ti matrix, an γ-Ti→γ-Ti H2 transition occurred during cathodization. The anodization with cathodic pretreatment not only produces titanium hydride layer, but also results in formation of nanostructural titanium oxide. Nanoporous titania can be enhanced osseointegration of implant such as orthopedic and dental implants.

UR - http://www.scopus.com/inward/record.url?scp=33845250188&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33845250188&partnerID=8YFLogxK

U2 - 10.1149/1.2386947

DO - 10.1149/1.2386947

M3 - Article

AN - SCOPUS:33845250188

VL - 154

JO - Journal of the Electrochemical Society

JF - Journal of the Electrochemical Society

SN - 0013-4651

IS - 1

ER -