Effect of food and oral simulating fluids on dentine bond and composite strength

S. Y. Lee, E. H. Greener, H. J. Mueller, C. H. Chiu

Research output: Contribution to journalArticle

34 Citations (Scopus)

Abstract

The effect of up to 30 days' immersion in 75% ethanol solution and in an artificial saliva (Moi-Stir) on the dentine shear bond strength (SBS) of three adhesive/composite systems (Tenure/Marathon One, Scotchbond Multi-Purpose/Z100 and Optibond/Herculite XRV) was evaluated. Two control series were stored either in 100% humidity or in air. Diametral tensile specimens (DTS) of the composites studied were stored in 75% ethanol for up to 30 days. The fracture mode and morphology of the failure interface were examined by scanning electron microscopy (SEM). Data were analysed using ANOVA and the Tukey LSD test. The SBS for all systems stored in Moi-Stir (24.8 ± 3.0 MPa) and air (28.3 ± 3.0 MPa) was not influenced by length of storage. Microscopic (SEM) examination of the debonded air, and Moi-Stir stored specimens showed that failure had primarily occurred through the dentine. Significant decreases (30-50%) in the SBS of all systems occurred after immersion in 75% ethanol. There was no significant difference among brands. The DTS of the composites showed significant decreases as a function of ethanol exposure. Marathon One and Herculite XRV showed significantly lower DTS after 14 days' storage while Z100 showed no reduction in DTS until after 30 days. The decrease in both SBS and DTS after storage in ethanol was a function of the square root of time (P <0.001) and followed Fick's laws of diffusion. Ethanol diffusivity was approximated as 1.8 × 10-6 cm2 s-1 for both SBS and DTS specimens, suggesting that alcohol attack in SBS specimens occurred primarily in the composite system. Microscopic examination found, at 7 days and longer storage times, numerous cracks through the composite, around the filler particles, or within the bonding agent, but not in the dentine.

Original languageEnglish
Pages (from-to)352-359
Number of pages8
JournalJournal of Dentistry
Volume22
Issue number6
DOIs
Publication statusPublished - 1994
Externally publishedYes

Fingerprint

Shear Strength
Dentin
Ethanol
Food
Air
Immersion
Electron Scanning Microscopy
Artificial Saliva
Lysergic Acid Diethylamide
Humidity
Adhesives
Analysis of Variance
Alcohols
saliment

Keywords

  • Composite
  • Dentine bonding agent
  • Diffusivity
  • SEM
  • Strength

ASJC Scopus subject areas

  • Dentistry(all)

Cite this

Effect of food and oral simulating fluids on dentine bond and composite strength. / Lee, S. Y.; Greener, E. H.; Mueller, H. J.; Chiu, C. H.

In: Journal of Dentistry, Vol. 22, No. 6, 1994, p. 352-359.

Research output: Contribution to journalArticle

Lee, S. Y. ; Greener, E. H. ; Mueller, H. J. ; Chiu, C. H. / Effect of food and oral simulating fluids on dentine bond and composite strength. In: Journal of Dentistry. 1994 ; Vol. 22, No. 6. pp. 352-359.
@article{4c27660e12f14a539cda55412353e318,
title = "Effect of food and oral simulating fluids on dentine bond and composite strength",
abstract = "The effect of up to 30 days' immersion in 75{\%} ethanol solution and in an artificial saliva (Moi-Stir) on the dentine shear bond strength (SBS) of three adhesive/composite systems (Tenure/Marathon One, Scotchbond Multi-Purpose/Z100 and Optibond/Herculite XRV) was evaluated. Two control series were stored either in 100{\%} humidity or in air. Diametral tensile specimens (DTS) of the composites studied were stored in 75{\%} ethanol for up to 30 days. The fracture mode and morphology of the failure interface were examined by scanning electron microscopy (SEM). Data were analysed using ANOVA and the Tukey LSD test. The SBS for all systems stored in Moi-Stir (24.8 ± 3.0 MPa) and air (28.3 ± 3.0 MPa) was not influenced by length of storage. Microscopic (SEM) examination of the debonded air, and Moi-Stir stored specimens showed that failure had primarily occurred through the dentine. Significant decreases (30-50{\%}) in the SBS of all systems occurred after immersion in 75{\%} ethanol. There was no significant difference among brands. The DTS of the composites showed significant decreases as a function of ethanol exposure. Marathon One and Herculite XRV showed significantly lower DTS after 14 days' storage while Z100 showed no reduction in DTS until after 30 days. The decrease in both SBS and DTS after storage in ethanol was a function of the square root of time (P <0.001) and followed Fick's laws of diffusion. Ethanol diffusivity was approximated as 1.8 × 10-6 cm2 s-1 for both SBS and DTS specimens, suggesting that alcohol attack in SBS specimens occurred primarily in the composite system. Microscopic examination found, at 7 days and longer storage times, numerous cracks through the composite, around the filler particles, or within the bonding agent, but not in the dentine.",
keywords = "Composite, Dentine bonding agent, Diffusivity, SEM, Strength",
author = "Lee, {S. Y.} and Greener, {E. H.} and Mueller, {H. J.} and Chiu, {C. H.}",
year = "1994",
doi = "10.1016/0300-5712(94)90088-4",
language = "English",
volume = "22",
pages = "352--359",
journal = "Journal of Dentistry",
issn = "0300-5712",
publisher = "Elsevier BV",
number = "6",

}

TY - JOUR

T1 - Effect of food and oral simulating fluids on dentine bond and composite strength

AU - Lee, S. Y.

AU - Greener, E. H.

AU - Mueller, H. J.

AU - Chiu, C. H.

PY - 1994

Y1 - 1994

N2 - The effect of up to 30 days' immersion in 75% ethanol solution and in an artificial saliva (Moi-Stir) on the dentine shear bond strength (SBS) of three adhesive/composite systems (Tenure/Marathon One, Scotchbond Multi-Purpose/Z100 and Optibond/Herculite XRV) was evaluated. Two control series were stored either in 100% humidity or in air. Diametral tensile specimens (DTS) of the composites studied were stored in 75% ethanol for up to 30 days. The fracture mode and morphology of the failure interface were examined by scanning electron microscopy (SEM). Data were analysed using ANOVA and the Tukey LSD test. The SBS for all systems stored in Moi-Stir (24.8 ± 3.0 MPa) and air (28.3 ± 3.0 MPa) was not influenced by length of storage. Microscopic (SEM) examination of the debonded air, and Moi-Stir stored specimens showed that failure had primarily occurred through the dentine. Significant decreases (30-50%) in the SBS of all systems occurred after immersion in 75% ethanol. There was no significant difference among brands. The DTS of the composites showed significant decreases as a function of ethanol exposure. Marathon One and Herculite XRV showed significantly lower DTS after 14 days' storage while Z100 showed no reduction in DTS until after 30 days. The decrease in both SBS and DTS after storage in ethanol was a function of the square root of time (P <0.001) and followed Fick's laws of diffusion. Ethanol diffusivity was approximated as 1.8 × 10-6 cm2 s-1 for both SBS and DTS specimens, suggesting that alcohol attack in SBS specimens occurred primarily in the composite system. Microscopic examination found, at 7 days and longer storage times, numerous cracks through the composite, around the filler particles, or within the bonding agent, but not in the dentine.

AB - The effect of up to 30 days' immersion in 75% ethanol solution and in an artificial saliva (Moi-Stir) on the dentine shear bond strength (SBS) of three adhesive/composite systems (Tenure/Marathon One, Scotchbond Multi-Purpose/Z100 and Optibond/Herculite XRV) was evaluated. Two control series were stored either in 100% humidity or in air. Diametral tensile specimens (DTS) of the composites studied were stored in 75% ethanol for up to 30 days. The fracture mode and morphology of the failure interface were examined by scanning electron microscopy (SEM). Data were analysed using ANOVA and the Tukey LSD test. The SBS for all systems stored in Moi-Stir (24.8 ± 3.0 MPa) and air (28.3 ± 3.0 MPa) was not influenced by length of storage. Microscopic (SEM) examination of the debonded air, and Moi-Stir stored specimens showed that failure had primarily occurred through the dentine. Significant decreases (30-50%) in the SBS of all systems occurred after immersion in 75% ethanol. There was no significant difference among brands. The DTS of the composites showed significant decreases as a function of ethanol exposure. Marathon One and Herculite XRV showed significantly lower DTS after 14 days' storage while Z100 showed no reduction in DTS until after 30 days. The decrease in both SBS and DTS after storage in ethanol was a function of the square root of time (P <0.001) and followed Fick's laws of diffusion. Ethanol diffusivity was approximated as 1.8 × 10-6 cm2 s-1 for both SBS and DTS specimens, suggesting that alcohol attack in SBS specimens occurred primarily in the composite system. Microscopic examination found, at 7 days and longer storage times, numerous cracks through the composite, around the filler particles, or within the bonding agent, but not in the dentine.

KW - Composite

KW - Dentine bonding agent

KW - Diffusivity

KW - SEM

KW - Strength

UR - http://www.scopus.com/inward/record.url?scp=0028719867&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0028719867&partnerID=8YFLogxK

U2 - 10.1016/0300-5712(94)90088-4

DO - 10.1016/0300-5712(94)90088-4

M3 - Article

C2 - 7844264

AN - SCOPUS:0028719867

VL - 22

SP - 352

EP - 359

JO - Journal of Dentistry

JF - Journal of Dentistry

SN - 0300-5712

IS - 6

ER -