Circuitry of multiplexer-on-chip system within the micro-LED array manufacturing CMOS substrate

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

In this paper, this research is after the process CMOS driver substrate. It is the use of A Benzocyclobutene polymer thin films planarization coating material in elements of the LED array manufacturing process. This CMOS driver circuit is a mode architecture that uses serial input data and parallel output data. It is the use of shift registers and latch circuit cell to form the overall system chip. The current density of the microcrystalline LED elements of each size is the same condition. The current density of a single 16 μm microcrystalline LED pixel driven by a 2.85 V drive circuit board is about 2.69 μA.

Original languageEnglish
Article number400
JournalOptical and Quantum Electronics
Volume50
Issue number11
DOIs
Publication statusPublished - Nov 1 2018

Fingerprint

Light emitting diodes
CMOS
light emitting diodes
manufacturing
chips
Networks (circuits)
Current density
Substrates
current density
latches
shift registers
Shift registers
Flip flop circuits
circuit boards
Polymer films
Pixels
pixels
coatings
Thin films
Coatings

Keywords

  • Circuitry
  • CMOS
  • LED
  • Manufacturing
  • Multiplexer

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Atomic and Molecular Physics, and Optics
  • Electrical and Electronic Engineering

Cite this

Circuitry of multiplexer-on-chip system within the micro-LED array manufacturing CMOS substrate. / Liou, Jian Chiun.

In: Optical and Quantum Electronics, Vol. 50, No. 11, 400, 01.11.2018.

Research output: Contribution to journalArticle

@article{77e2e465a15e4681aba8a13b9a8f95a2,
title = "Circuitry of multiplexer-on-chip system within the micro-LED array manufacturing CMOS substrate",
abstract = "In this paper, this research is after the process CMOS driver substrate. It is the use of A Benzocyclobutene polymer thin films planarization coating material in elements of the LED array manufacturing process. This CMOS driver circuit is a mode architecture that uses serial input data and parallel output data. It is the use of shift registers and latch circuit cell to form the overall system chip. The current density of the microcrystalline LED elements of each size is the same condition. The current density of a single 16 μm microcrystalline LED pixel driven by a 2.85 V drive circuit board is about 2.69 μA.",
keywords = "Circuitry, CMOS, LED, Manufacturing, Multiplexer",
author = "Liou, {Jian Chiun}",
year = "2018",
month = "11",
day = "1",
doi = "10.1007/s11082-018-1625-7",
language = "English",
volume = "50",
journal = "Optical and Quantum Electronics",
issn = "0306-8919",
publisher = "Springer New York",
number = "11",

}

TY - JOUR

T1 - Circuitry of multiplexer-on-chip system within the micro-LED array manufacturing CMOS substrate

AU - Liou, Jian Chiun

PY - 2018/11/1

Y1 - 2018/11/1

N2 - In this paper, this research is after the process CMOS driver substrate. It is the use of A Benzocyclobutene polymer thin films planarization coating material in elements of the LED array manufacturing process. This CMOS driver circuit is a mode architecture that uses serial input data and parallel output data. It is the use of shift registers and latch circuit cell to form the overall system chip. The current density of the microcrystalline LED elements of each size is the same condition. The current density of a single 16 μm microcrystalline LED pixel driven by a 2.85 V drive circuit board is about 2.69 μA.

AB - In this paper, this research is after the process CMOS driver substrate. It is the use of A Benzocyclobutene polymer thin films planarization coating material in elements of the LED array manufacturing process. This CMOS driver circuit is a mode architecture that uses serial input data and parallel output data. It is the use of shift registers and latch circuit cell to form the overall system chip. The current density of the microcrystalline LED elements of each size is the same condition. The current density of a single 16 μm microcrystalline LED pixel driven by a 2.85 V drive circuit board is about 2.69 μA.

KW - Circuitry

KW - CMOS

KW - LED

KW - Manufacturing

KW - Multiplexer

UR - http://www.scopus.com/inward/record.url?scp=85055356503&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85055356503&partnerID=8YFLogxK

U2 - 10.1007/s11082-018-1625-7

DO - 10.1007/s11082-018-1625-7

M3 - Article

AN - SCOPUS:85055356503

VL - 50

JO - Optical and Quantum Electronics

JF - Optical and Quantum Electronics

SN - 0306-8919

IS - 11

M1 - 400

ER -