Blade-coated sol-gel indium-gallium-zinc-oxide for inverted polymer solar cell

Yan Huei Lee, Pei Ting Tsai, Chia Ju Chang, Hsin Fei Meng, Sheng Fu Horng, Hsiao Wen Zan, Hung Cheng Lin, Hung Chuan Liu, Mei Rurng Tseng, Han Cheng Yeh

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

The inverted organic solar cell was fabricated by using sol-gel indium-gallium-zinc-oxide (IGZO) as the electron-transport layer. The IGZO precursor solution was deposited by blade coating with simultaneous substrate heating at 120 °C from the bottom and hot wind from above. Uniform IGZO film of around 30 nm was formed after annealing at 400 °C. Using the blend of low band-gap polymer poly[(4,8-bis-(2-ethylhexyloxy)-benzo(1,2-b:4,5-b')dithiophene)-2,6-diyl-alt- (4-(2-ethylhexanoyl)-thieno [3,4-b]thiophene-)-2-6-diyl)] (PBDTTT-C-T) and [6,6]-Phenyl C 71 butyric acid methyl ester ([70]PCBM) as the active layer for the inverted organic solar cell, an efficiency of 6.2% was achieved with a blade speed of 180 mm/s for the IGZO. The efficiency of the inverted organic solar cells was found to depend on the coating speed of the IGZO films, which was attributed to the change in the concentration of surface OH groups. Compared to organic solar cells of conventional structure using PBDTTT-C-T: [70]PCBM as active layer, the inverted organic solar cells showed significant improvement in thermal stability. In addition, the chemical composition, as well as the work function of the IGZO film at the surface and inside can be tuned by the blade speed, which may find applications in other areas like thin-film transistors.

Original languageEnglish
Article number115006
JournalAIP Advances
Volume6
Issue number11
DOIs
Publication statusPublished - Nov 1 2016
Externally publishedYes

Fingerprint

gallium oxides
blades
zinc oxides
indium
solar cells
gels
polymers
oxide films
coatings
butyric acid
thiophenes
esters
chemical composition
thermal stability
transistors
annealing
heating
thin films
electrons

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Cite this

Lee, Y. H., Tsai, P. T., Chang, C. J., Meng, H. F., Horng, S. F., Zan, H. W., ... Yeh, H. C. (2016). Blade-coated sol-gel indium-gallium-zinc-oxide for inverted polymer solar cell. AIP Advances, 6(11), [115006]. https://doi.org/10.1063/1.4967288

Blade-coated sol-gel indium-gallium-zinc-oxide for inverted polymer solar cell. / Lee, Yan Huei; Tsai, Pei Ting; Chang, Chia Ju; Meng, Hsin Fei; Horng, Sheng Fu; Zan, Hsiao Wen; Lin, Hung Cheng; Liu, Hung Chuan; Tseng, Mei Rurng; Yeh, Han Cheng.

In: AIP Advances, Vol. 6, No. 11, 115006, 01.11.2016.

Research output: Contribution to journalArticle

Lee, YH, Tsai, PT, Chang, CJ, Meng, HF, Horng, SF, Zan, HW, Lin, HC, Liu, HC, Tseng, MR & Yeh, HC 2016, 'Blade-coated sol-gel indium-gallium-zinc-oxide for inverted polymer solar cell', AIP Advances, vol. 6, no. 11, 115006. https://doi.org/10.1063/1.4967288
Lee, Yan Huei ; Tsai, Pei Ting ; Chang, Chia Ju ; Meng, Hsin Fei ; Horng, Sheng Fu ; Zan, Hsiao Wen ; Lin, Hung Cheng ; Liu, Hung Chuan ; Tseng, Mei Rurng ; Yeh, Han Cheng. / Blade-coated sol-gel indium-gallium-zinc-oxide for inverted polymer solar cell. In: AIP Advances. 2016 ; Vol. 6, No. 11.
@article{6d48c8bbe1714b2ba9d362208ab7123e,
title = "Blade-coated sol-gel indium-gallium-zinc-oxide for inverted polymer solar cell",
abstract = "The inverted organic solar cell was fabricated by using sol-gel indium-gallium-zinc-oxide (IGZO) as the electron-transport layer. The IGZO precursor solution was deposited by blade coating with simultaneous substrate heating at 120 °C from the bottom and hot wind from above. Uniform IGZO film of around 30 nm was formed after annealing at 400 °C. Using the blend of low band-gap polymer poly[(4,8-bis-(2-ethylhexyloxy)-benzo(1,2-b:4,5-b')dithiophene)-2,6-diyl-alt- (4-(2-ethylhexanoyl)-thieno [3,4-b]thiophene-)-2-6-diyl)] (PBDTTT-C-T) and [6,6]-Phenyl C 71 butyric acid methyl ester ([70]PCBM) as the active layer for the inverted organic solar cell, an efficiency of 6.2{\%} was achieved with a blade speed of 180 mm/s for the IGZO. The efficiency of the inverted organic solar cells was found to depend on the coating speed of the IGZO films, which was attributed to the change in the concentration of surface OH groups. Compared to organic solar cells of conventional structure using PBDTTT-C-T: [70]PCBM as active layer, the inverted organic solar cells showed significant improvement in thermal stability. In addition, the chemical composition, as well as the work function of the IGZO film at the surface and inside can be tuned by the blade speed, which may find applications in other areas like thin-film transistors.",
author = "Lee, {Yan Huei} and Tsai, {Pei Ting} and Chang, {Chia Ju} and Meng, {Hsin Fei} and Horng, {Sheng Fu} and Zan, {Hsiao Wen} and Lin, {Hung Cheng} and Liu, {Hung Chuan} and Tseng, {Mei Rurng} and Yeh, {Han Cheng}",
year = "2016",
month = "11",
day = "1",
doi = "10.1063/1.4967288",
language = "English",
volume = "6",
journal = "AIP Advances",
issn = "2158-3226",
publisher = "American Institute of Physics Publising LLC",
number = "11",

}

TY - JOUR

T1 - Blade-coated sol-gel indium-gallium-zinc-oxide for inverted polymer solar cell

AU - Lee, Yan Huei

AU - Tsai, Pei Ting

AU - Chang, Chia Ju

AU - Meng, Hsin Fei

AU - Horng, Sheng Fu

AU - Zan, Hsiao Wen

AU - Lin, Hung Cheng

AU - Liu, Hung Chuan

AU - Tseng, Mei Rurng

AU - Yeh, Han Cheng

PY - 2016/11/1

Y1 - 2016/11/1

N2 - The inverted organic solar cell was fabricated by using sol-gel indium-gallium-zinc-oxide (IGZO) as the electron-transport layer. The IGZO precursor solution was deposited by blade coating with simultaneous substrate heating at 120 °C from the bottom and hot wind from above. Uniform IGZO film of around 30 nm was formed after annealing at 400 °C. Using the blend of low band-gap polymer poly[(4,8-bis-(2-ethylhexyloxy)-benzo(1,2-b:4,5-b')dithiophene)-2,6-diyl-alt- (4-(2-ethylhexanoyl)-thieno [3,4-b]thiophene-)-2-6-diyl)] (PBDTTT-C-T) and [6,6]-Phenyl C 71 butyric acid methyl ester ([70]PCBM) as the active layer for the inverted organic solar cell, an efficiency of 6.2% was achieved with a blade speed of 180 mm/s for the IGZO. The efficiency of the inverted organic solar cells was found to depend on the coating speed of the IGZO films, which was attributed to the change in the concentration of surface OH groups. Compared to organic solar cells of conventional structure using PBDTTT-C-T: [70]PCBM as active layer, the inverted organic solar cells showed significant improvement in thermal stability. In addition, the chemical composition, as well as the work function of the IGZO film at the surface and inside can be tuned by the blade speed, which may find applications in other areas like thin-film transistors.

AB - The inverted organic solar cell was fabricated by using sol-gel indium-gallium-zinc-oxide (IGZO) as the electron-transport layer. The IGZO precursor solution was deposited by blade coating with simultaneous substrate heating at 120 °C from the bottom and hot wind from above. Uniform IGZO film of around 30 nm was formed after annealing at 400 °C. Using the blend of low band-gap polymer poly[(4,8-bis-(2-ethylhexyloxy)-benzo(1,2-b:4,5-b')dithiophene)-2,6-diyl-alt- (4-(2-ethylhexanoyl)-thieno [3,4-b]thiophene-)-2-6-diyl)] (PBDTTT-C-T) and [6,6]-Phenyl C 71 butyric acid methyl ester ([70]PCBM) as the active layer for the inverted organic solar cell, an efficiency of 6.2% was achieved with a blade speed of 180 mm/s for the IGZO. The efficiency of the inverted organic solar cells was found to depend on the coating speed of the IGZO films, which was attributed to the change in the concentration of surface OH groups. Compared to organic solar cells of conventional structure using PBDTTT-C-T: [70]PCBM as active layer, the inverted organic solar cells showed significant improvement in thermal stability. In addition, the chemical composition, as well as the work function of the IGZO film at the surface and inside can be tuned by the blade speed, which may find applications in other areas like thin-film transistors.

UR - http://www.scopus.com/inward/record.url?scp=84994242452&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84994242452&partnerID=8YFLogxK

U2 - 10.1063/1.4967288

DO - 10.1063/1.4967288

M3 - Article

VL - 6

JO - AIP Advances

JF - AIP Advances

SN - 2158-3226

IS - 11

M1 - 115006

ER -