Analysis of the replication properties of lightguiding plate for micro injection compression molding

Y. K. Shen; H. J. Chang; L. H. Hung

doi:10.4028/0-87849-416-2.643

Analysis of the replication properties of lightguiding plate for micro injection compression molding

Y. K. Shen, H. J. Chang, L. H. Hung

Research output: Contribution to journal › Article › peer-review

7 Citations (Scopus)

Abstract

This paper presents the application of microstructure replication of lightguiding plate for micro injection compression molding (MICM). The lightguiding plate is applied on LCD of two inch of digital camera. Its radius of micro-structure is from 100μm to 300μm by linearity expansion. The material of lightguiding plate is PMMA. This paper discusses the replication properties for different process parameters by single-parameter method for micro injection compression molding. The important process parameters of replication properties are the mold temperature, compression distance and melt temperature in micro injection compression molding. The mold temperature is the most significant factor of replication properties of microstructure of lightguiding plate for micro injection compression molding.

Original language	English
Pages (from-to)	643-648
Number of pages	6
Journal	Key Engineering Materials
Volume	329
DOIs	https://doi.org/10.4028/0-87849-416-2.643
Publication status	Published - 2007
Externally published	Yes

Keywords

Lightguiding plate
Micro injection compression molding
Microstructure
Replication

ASJC Scopus subject areas

Ceramics and Composites
Chemical Engineering (miscellaneous)

Access to Document

10.4028/0-87849-416-2.643

Cite this

@article{441d16cc54644fc18fe9d36c3b733b87,

title = "Analysis of the replication properties of lightguiding plate for micro injection compression molding",

abstract = "This paper presents the application of microstructure replication of lightguiding plate for micro injection compression molding (MICM). The lightguiding plate is applied on LCD of two inch of digital camera. Its radius of micro-structure is from 100μm to 300μm by linearity expansion. The material of lightguiding plate is PMMA. This paper discusses the replication properties for different process parameters by single-parameter method for micro injection compression molding. The important process parameters of replication properties are the mold temperature, compression distance and melt temperature in micro injection compression molding. The mold temperature is the most significant factor of replication properties of microstructure of lightguiding plate for micro injection compression molding.",

keywords = "Lightguiding plate, Micro injection compression molding, Microstructure, Replication",

author = "Shen, {Y. K.} and Chang, {H. J.} and Hung, {L. H.}",

year = "2007",

doi = "10.4028/0-87849-416-2.643",

language = "English",

volume = "329",

pages = "643--648",

journal = "Key Engineering Materials",

issn = "1013-9826",

publisher = "Trans Tech Publications",

}

TY - JOUR

T1 - Analysis of the replication properties of lightguiding plate for micro injection compression molding

AU - Shen, Y. K.

AU - Chang, H. J.

AU - Hung, L. H.

PY - 2007

Y1 - 2007

N2 - This paper presents the application of microstructure replication of lightguiding plate for micro injection compression molding (MICM). The lightguiding plate is applied on LCD of two inch of digital camera. Its radius of micro-structure is from 100μm to 300μm by linearity expansion. The material of lightguiding plate is PMMA. This paper discusses the replication properties for different process parameters by single-parameter method for micro injection compression molding. The important process parameters of replication properties are the mold temperature, compression distance and melt temperature in micro injection compression molding. The mold temperature is the most significant factor of replication properties of microstructure of lightguiding plate for micro injection compression molding.

AB - This paper presents the application of microstructure replication of lightguiding plate for micro injection compression molding (MICM). The lightguiding plate is applied on LCD of two inch of digital camera. Its radius of micro-structure is from 100μm to 300μm by linearity expansion. The material of lightguiding plate is PMMA. This paper discusses the replication properties for different process parameters by single-parameter method for micro injection compression molding. The important process parameters of replication properties are the mold temperature, compression distance and melt temperature in micro injection compression molding. The mold temperature is the most significant factor of replication properties of microstructure of lightguiding plate for micro injection compression molding.

KW - Lightguiding plate

KW - Micro injection compression molding

KW - Microstructure

KW - Replication

UR - http://www.scopus.com/inward/record.url?scp=33846301001&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33846301001&partnerID=8YFLogxK

U2 - 10.4028/0-87849-416-2.643

DO - 10.4028/0-87849-416-2.643

M3 - Article

AN - SCOPUS:33846301001

SN - 1013-9826

VL - 329

SP - 643

EP - 648

JO - Key Engineering Materials

JF - Key Engineering Materials

ER -

Analysis of the replication properties of lightguiding plate for micro injection compression molding

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this