A novel fabrication method for mold insert of injection molded microlens array

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Abstract

This paper reports a simple and novel procedure for mold insert of microlens array. The micro injection molding (MIM) and micro injection-compression molding (MICM) are used to replicate the microlens array. The 200*200 arrays of molded microlens, with a diameter of 150 μm, a pitch of 200 μm and a sag height of 11.236 μm have been successfully fabricated. The average surface roughness of the Ni mold insert is 6.916 nm. The average surface roughness of the molded microlens array is 4.608 nm for MIM and 4.555 nm for MICM. The complete fabrication process of mold insert is executed at room temperature and low pressure for this paper.

Original languageEnglish
Title of host publicationMaterials Science Forum
Pages665-668
Number of pages4
Volume532-533
Publication statusPublished - 2006
Externally publishedYes
Event12th International Manufacturing Conference in China, IMCC2006 - Xi'an, China
Duration: Sep 21 2006Sep 23 2006

Publication series

NameMaterials Science Forum
Volume532-533
ISSN (Print)02555476

Other

Other12th International Manufacturing Conference in China, IMCC2006
CountryChina
CityXi'an
Period9/21/069/23/06

Fingerprint

Injection molding
Fabrication
Die casting inserts
Compression molding
Surface roughness
Temperature

Keywords

  • Electroforming
  • Microlens array
  • Room-temperature imprint lithography
  • Surface roughness

ASJC Scopus subject areas

  • Materials Science(all)

Cite this

Shen, Y. K. (2006). A novel fabrication method for mold insert of injection molded microlens array. In Materials Science Forum (Vol. 532-533, pp. 665-668). (Materials Science Forum; Vol. 532-533).

A novel fabrication method for mold insert of injection molded microlens array. / Shen, Yung Kang.

Materials Science Forum. Vol. 532-533 2006. p. 665-668 (Materials Science Forum; Vol. 532-533).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Shen, YK 2006, A novel fabrication method for mold insert of injection molded microlens array. in Materials Science Forum. vol. 532-533, Materials Science Forum, vol. 532-533, pp. 665-668, 12th International Manufacturing Conference in China, IMCC2006, Xi'an, China, 9/21/06.
Shen YK. A novel fabrication method for mold insert of injection molded microlens array. In Materials Science Forum. Vol. 532-533. 2006. p. 665-668. (Materials Science Forum).
Shen, Yung Kang. / A novel fabrication method for mold insert of injection molded microlens array. Materials Science Forum. Vol. 532-533 2006. pp. 665-668 (Materials Science Forum).
@inproceedings{d3f40bcec2e74ebe8182b4c749736dfe,
title = "A novel fabrication method for mold insert of injection molded microlens array",
abstract = "This paper reports a simple and novel procedure for mold insert of microlens array. The micro injection molding (MIM) and micro injection-compression molding (MICM) are used to replicate the microlens array. The 200*200 arrays of molded microlens, with a diameter of 150 μm, a pitch of 200 μm and a sag height of 11.236 μm have been successfully fabricated. The average surface roughness of the Ni mold insert is 6.916 nm. The average surface roughness of the molded microlens array is 4.608 nm for MIM and 4.555 nm for MICM. The complete fabrication process of mold insert is executed at room temperature and low pressure for this paper.",
keywords = "Electroforming, Microlens array, Room-temperature imprint lithography, Surface roughness",
author = "Shen, {Yung Kang}",
year = "2006",
language = "English",
isbn = "0878494219",
volume = "532-533",
series = "Materials Science Forum",
pages = "665--668",
booktitle = "Materials Science Forum",

}

TY - GEN

T1 - A novel fabrication method for mold insert of injection molded microlens array

AU - Shen, Yung Kang

PY - 2006

Y1 - 2006

N2 - This paper reports a simple and novel procedure for mold insert of microlens array. The micro injection molding (MIM) and micro injection-compression molding (MICM) are used to replicate the microlens array. The 200*200 arrays of molded microlens, with a diameter of 150 μm, a pitch of 200 μm and a sag height of 11.236 μm have been successfully fabricated. The average surface roughness of the Ni mold insert is 6.916 nm. The average surface roughness of the molded microlens array is 4.608 nm for MIM and 4.555 nm for MICM. The complete fabrication process of mold insert is executed at room temperature and low pressure for this paper.

AB - This paper reports a simple and novel procedure for mold insert of microlens array. The micro injection molding (MIM) and micro injection-compression molding (MICM) are used to replicate the microlens array. The 200*200 arrays of molded microlens, with a diameter of 150 μm, a pitch of 200 μm and a sag height of 11.236 μm have been successfully fabricated. The average surface roughness of the Ni mold insert is 6.916 nm. The average surface roughness of the molded microlens array is 4.608 nm for MIM and 4.555 nm for MICM. The complete fabrication process of mold insert is executed at room temperature and low pressure for this paper.

KW - Electroforming

KW - Microlens array

KW - Room-temperature imprint lithography

KW - Surface roughness

UR - http://www.scopus.com/inward/record.url?scp=38949159263&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=38949159263&partnerID=8YFLogxK

M3 - Conference contribution

SN - 0878494219

SN - 9780878494217

VL - 532-533

T3 - Materials Science Forum

SP - 665

EP - 668

BT - Materials Science Forum

ER -