• 768 Citations
  • 16 h-Index
1994 …2020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

  • 768 Citations
  • 16 h-Index
  • 75 Article
  • 23 Conference contribution
Filter
Conference contribution
2014

Analysis on warpage of support structure of computer hard disk for optimum processing by precision injection molding

Wang, Y. N., Wang, H. S., Ho, W. T., Lin, Y. & Shen, Y. K., 2014, Information Technology and Computer Application Engineering - Proceedings of the 2013 International Conference on Information Technology and Computer Application Engineering, ITCAE 2013. shers, p. 811-814 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fabrication of micropattern of plastic film using ultrasonic micro embossing

Cheng, H. C., Huang, C. F., Lin, Y. & Shen, Y. K., 2014, Advanced Materials Research. Trans Tech Publications, Vol. 912-914. p. 141-144 4 p. (Advanced Materials Research; vol. 912-914).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2013

A modified surface on titanium alloy by micro-blasting process

Lin, Y., Huang, C. F., Cheng, H. C. & Shen, Y. K., 2013, Advanced Materials Research. Vol. 797. p. 696-699 4 p. (Advanced Materials Research; vol. 797).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Optimal processing for hydrophobic nanopillar polymer surfaces using nanoporous alumina template

Chiu, C. Y., Lin, Y., Tseng, Y. C. & Shen, Y. K., 2013, Advanced Materials Research. Vol. 646. p. 84-89 6 p. (Advanced Materials Research; vol. 646).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Study on cellar behaviors on different micro/nano structures of anodic aluminum oxide template

Huang, C. F., Cheng, H. C., Lin, Y. & Shen, Y. K., 2013, Advanced Materials Research. Vol. 647. p. 111-117 7 p. (Advanced Materials Research; vol. 647).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2012

Morphological evolution of nanostructured surface using anodic aluminum template

Chiu, C. Y., Huang, C. F., Lee, J. L., Lin, Y. & Shen, Y. K., 2012, Proceedings of SPIE - The International Society for Optical Engineering. Vol. 8409. 84091G

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Optimal design of microneedles inserts into skin by numerical simulation

Chiu, C. Y., Kuo, H. C., Lin, Y., Lee, J. L., Shen, Y. K. & Kang, S. J., 2012, Key Engineering Materials. Vol. 516. p. 624-628 5 p. (Key Engineering Materials; vol. 516).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Warpage measurement of a micro electrical fan on micro-injection molding

Lee, J. L., Lin, Y. & Shen, Y. K., 2012, Applied Mechanics and Materials. Vol. 184-185. p. 1651-1654 4 p. (Applied Mechanics and Materials; vol. 184-185).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2011

Invasive PLA microneedle fabrication applied to drug delivery system

Kuo, H. C., Lin, Y., Shen, Y. K. & Kang, S. C., 2011, 2011 2nd International Conference on Mechanic Automation and Control Engineering, MACE 2011 - Proceedings. p. 7437-7440 4 p. 5988769

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Study on the flow situations of lightguiding plates by micro injection molding

Huang, C. F., Lin, Y. & Shen, Y. K., 2011, Advanced Materials Research. Vol. 268-270. p. 123-128 6 p. (Advanced Materials Research; vol. 268-270).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
2010

Fabrication and detection for the skeletons of micro aerial vehicle using precision injection molding

Lee, J. L., Ho, C. H., Lin, Y. & Shen, Y. K., 2010, Key Engineering Materials. Vol. 443. p. 75-80 6 p. (Key Engineering Materials; vol. 443).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Fabrication inner channel ceramics using layer additive method

Liu, F. H., Lin, W. H., Shen, Y. K. & Lee, J. L., 2010, Key Engineering Materials. Vol. 443. p. 528-533 6 p. (Key Engineering Materials; vol. 443).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fabrication of a large-area silicon mold with microstructures using a novel recombining technique

Wu, C. W., Chi, C. H., Tsai, H. Y. & Shen, Y. K., 2010, Key Engineering Materials. Vol. 443. p. 213-218 6 p. (Key Engineering Materials; vol. 443).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Surface modification of plastic thin film using anodic aluminum oxide template for nano imprint

Wu, C. W., Lee, J. L., Lin, Y. & Shen, Y. K., 2010, Key Engineering Materials. Vol. 443. p. 711-716 6 p. (Key Engineering Materials; vol. 443).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2009

A Micro-Aerial-Vehicle (MAV) with figure-of-eight flapping induced by flexible wing frames

Yang, L. J., Hsu, C. K., Hsiao, F. Y., Feng, C. K. & Shen, Y. K., 2009, 47th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition. 2009-0875

Research output: Chapter in Book/Report/Conference proceedingConference contribution

13 Citations (Scopus)

Brightness field and Luminance distribution of light guiding plate using micro molding

Huang, C. F., Lee, J. L., Shen, Y. K., Lin, Y. & Wu, C. W., 2009, Proceedings of SPIE - The International Society for Optical Engineering. Vol. 7506. 750603

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fabrication and analysis of microfluidic mold insert by micro electrical discharge machining

Lee, J. L., Shen, Y. K., Lin, Y., Teng, P. T. & Huang, C. M., 2009, 4th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, NEMS 2009. p. 941-945 5 p. 5068729

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

The microchannel of microfluidic chip fabrication by micro-powder blasting

Huang, C. F., Shen, Y. K., Lin, Y. & Wu, C. W., 2009, Advanced Materials Research. Vol. 76-78. p. 367-372 6 p. (Advanced Materials Research; vol. 76-78).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2008

Microfluidic chip fabrication by micro-powder blasting

Shih, Y. H., Shen, Y. K., Lin, Y., Ou, K. L., Hong, R. H. & Hsu, S. C., 2008, 3rd IEEE International Conference on Nano/Micro Engineered and Molecular Systems, NEMS. p. 780-783 4 p. 4484442

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Microfluidic chip fabrication for silicon mold insert by micro hot embossing

Shih, Y. H., Shen, Y. K., Lin, Y., Lee, J. L., Lin, C. T., Lee, C. P. & Wu, M. W., 2008, 3rd IEEE International Conference on Nano/Micro Engineered and Molecular Systems, NEMS. p. 690-693 4 p. 4484423

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)
2006

A novel fabrication method and optimum tooling design for microlens arrays

Shen, Y. K., Chang, C. Y., Shen, Y. S. & Yang, S. Y., 2006, Annual Technical Conference - ANTEC, Conference Proceedings. Vol. 5. p. 2571-2575 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

A novel fabrication method for mold insert of injection molded microlens array

Shen, Y. K., 2006, Materials Science Forum. Vol. 532-533. p. 665-668 4 p. (Materials Science Forum; vol. 532-533).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

The novel fabrication method and optimum tooling design used for microlens arrays

Shen, Y. K. & Shen, Y. S., 2006, Proceedings of 1st IEEE International Conference on Nano Micro Engineered and Molecular Systems, 1st IEEE-NEMS. p. 187-191 5 p. 4134931

Research output: Chapter in Book/Report/Conference proceedingConference contribution