• No. 250 Wu-Xing Street

    11031 Taipei

Research Output 1991 2019

Filter
Conference contribution
2014

Analysis on warpage of support structure of computer hard disk for optimum processing by precision injection molding

Wang, Y. N., Wang, H. S., Ho, W. T., Lin, Y. & Shen, Y. K., 2014, Information Technology and Computer Application Engineering - Proceedings of the 2013 International Conference on Information Technology and Computer Application Engineering, ITCAE 2013. shers, p. 811-814 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hard disk storage
Injection molding
Processing
Taguchi methods
Temperature

Fabrication of micropattern of plastic film using ultrasonic micro embossing

Cheng, H. C., Huang, C. F., Lin, Y. & Shen, Y. K., 2014, Advanced Materials Research. Trans Tech Publications, Vol. 912-914. p. 141-144 4 p. (Advanced Materials Research; vol. 912-914).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Plastic films
Ultrasonics
Fabrication
Ultrasonic waves
Plastics
2013
2 Citations (Scopus)

A modified surface on titanium alloy by micro-blasting process

Lin, Y., Huang, C. F., Cheng, H. C. & Shen, Y. K., 2013, Advanced Materials Research. Vol. 797. p. 696-699 4 p. (Advanced Materials Research; vol. 797).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Blasting
Titanium alloys
Abrasives
Hydroxyapatite
Apatite
1 Citation (Scopus)

Optimal processing for hydrophobic nanopillar polymer surfaces using nanoporous alumina template

Chiu, C. Y., Lin, Y., Tseng, Y. C. & Shen, Y. K., 2013, Advanced Materials Research. Vol. 646. p. 84-89 6 p. (Advanced Materials Research; vol. 646).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Plastic films
Nanostructures
Alumina
Aluminum
Thin films

Study on cellar behaviors on different micro/nano structures of anodic aluminum oxide template

Huang, C. F., Cheng, H. C., Lin, Y. & Shen, Y. K., 2013, Advanced Materials Research. Vol. 647. p. 111-117 7 p. (Advanced Materials Research; vol. 647).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Osteoblasts
Aluminum
Oxides
Clean rooms
Microstructure
2012

Morphological evolution of nanostructured surface using anodic aluminum template

Chiu, C. Y., Huang, C. F., Lee, J. L., Lin, Y. & Shen, Y. K., 2012, Proceedings of SPIE - The International Society for Optical Engineering. Vol. 8409. 84091G

Research output: Chapter in Book/Report/Conference proceedingConference contribution

polycarbonate
Nanostructures
Aluminum
Aluminum Oxide
Thin Films
2 Citations (Scopus)

Optimal design of microneedles inserts into skin by numerical simulation

Chiu, C. Y., Kuo, H. C., Lin, Y., Lee, J. L., Shen, Y. K. & Kang, S. J., 2012, Key Engineering Materials. Vol. 516. p. 624-628 5 p. (Key Engineering Materials; vol. 516).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Skin
Biodegradable polymers
Computer simulation
Acids
MEMS
1 Citation (Scopus)

Researches of Mechanical Properties and Biocompatibility on Nanocrystalline Diamond

Hung, J. M., Wu, C. Z., Ou, K. L., Liu, C. M. & Peng, P. W., 2012, 18th International Vacuum Congress, IVC 2010. Elsevier B.V., Vol. 32. p. 696-705 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

biocompatibility
diamond films
diamonds
mechanical properties
gas mixtures
8 Citations (Scopus)

The Effect of Nitrided Layer on Antibacterial Properties for Biomedical Stainless Steel

Hung, C. F., Wu, C. Z., Lee, W. F., Ou, K. L., Liu, C. M. & Peng, P. W., 2012, 18th International Vacuum Congress, IVC 2010. Elsevier B.V., Vol. 32. p. 914-919 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

stainless steels
nitriding
austenitic stainless steels
hardness
test equipment

Warpage measurement of a micro electrical fan on micro-injection molding

Lee, J. L., Lin, Y. & Shen, Y. K., 2012, Applied Mechanics and Materials. Vol. 184-185. p. 1651-1654 4 p. (Applied Mechanics and Materials; vol. 184-185).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Injection molding
Fans
Butadiene
Polyamides
Styrene
2011
3 Citations (Scopus)

Invasive PLA microneedle fabrication applied to drug delivery system

Kuo, H. C., Lin, Y., Shen, Y. K. & Kang, S. C., 2011, 2011 2nd International Conference on Mechanic Automation and Control Engineering, MACE 2011 - Proceedings. p. 7437-7440 4 p. 5988769

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Skin
Fabrication
Acids
Biodegradable polymers
Polydimethylsiloxane
1 Citation (Scopus)

Study on the flow situations of lightguiding plates by micro injection molding

Huang, C. F., Lin, Y. & Shen, Y. K., 2011, Advanced Materials Research. Vol. 268-270. p. 123-128 6 p. (Advanced Materials Research; vol. 268-270).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Injection molding
Plastics
Heating
Temperature distribution
Viscosity
2010
1 Citation (Scopus)

Fabrication and detection for the skeletons of micro aerial vehicle using precision injection molding

Lee, J. L., Ho, C. H., Lin, Y. & Shen, Y. K., 2010, Key Engineering Materials. Vol. 443. p. 75-80 6 p. (Key Engineering Materials; vol. 443).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Injection molding
Antennas
Micro air vehicle (MAV)
Fabrication
Taguchi methods

Fabrication inner channel ceramics using layer additive method

Liu, F. H., Lin, W. H., Shen, Y. K. & Lee, J. L., 2010, Key Engineering Materials. Vol. 443. p. 528-533 6 p. (Key Engineering Materials; vol. 443).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Curing
Slurries
Fabrication
Powders
Lasers

Fabrication of a large-area silicon mold with microstructures using a novel recombining technique

Wu, C. W., Chi, C. H., Tsai, H. Y. & Shen, Y. K., 2010, Key Engineering Materials. Vol. 443. p. 213-218 6 p. (Key Engineering Materials; vol. 443).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Silicon
Fabrication
Microstructure
Micromachining
Polydimethylsiloxane

Fabrication of electrospun (ES) hydrophilic PLA95/biocerimic membranes for GTR/GBR applications

Hu, H. T., Wu, H. D., Chia-Hsiang, C., Lee, S. Y. & Yang, J. C., 2010, 7th Asian-Australasian Conference on Composite Materials 2010, ACCM 2010. ACCM-7 Organizing Committee, Vol. 2. p. 958-961 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Membranes
Fabrication
Electrospinning
Bone
Tissue

Surface modification of plastic thin film using anodic aluminum oxide template for nano imprint

Wu, C. W., Lee, J. L., Lin, Y. & Shen, Y. K., 2010, Key Engineering Materials. Vol. 443. p. 711-716 6 p. (Key Engineering Materials; vol. 443).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

polycarbonate
Plastic films
Aluminum Oxide
Polycarbonates
Surface treatment
2009
14 Citations (Scopus)

A Micro-Aerial-Vehicle (MAV) with figure-of-eight flapping induced by flexible wing frames

Yang, L. J., Hsu, C. K., Hsiao, F. Y., Feng, C. K. & Shen, Y. K., 2009, 47th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition. 2009-0875

Research output: Chapter in Book/Report/Conference proceedingConference contribution

flexible wings
Flexible wings
flapping
vehicles
Antennas

Brightness field and Luminance distribution of light guiding plate using micro molding

Huang, C. F., Lee, J. L., Shen, Y. K., Lin, Y. & Wu, C. W., 2009, Proceedings of SPIE - The International Society for Optical Engineering. Vol. 7506. 750603

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Molding
Luminance
Brightness
luminance
injection molding
2 Citations (Scopus)

Fabrication and analysis of microfluidic mold insert by micro electrical discharge machining

Lee, J. L., Shen, Y. K., Lin, Y., Teng, P. T. & Huang, C. M., 2009, 4th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, NEMS 2009. p. 941-945 5 p. 5068729

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electric discharge machining
Microfluidics
Fabrication
Aluminum
Molding

The microchannel of microfluidic chip fabrication by micro-powder blasting

Huang, C. F., Shen, Y. K., Lin, Y. & Wu, C. W., 2009, Advanced Materials Research. Vol. 76-78. p. 367-372 6 p. (Advanced Materials Research; vol. 76-78).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Blasting
Microchannels
Microfluidics
Powders
Fabrication
2008
1 Citation (Scopus)

Microfluidic chip fabrication by micro-powder blasting

Shih, Y. H., Shen, Y. K., Lin, Y., Ou, K. L., Hong, R. H. & Hsu, S. C., 2008, 3rd IEEE International Conference on Nano/Micro Engineered and Molecular Systems, NEMS. p. 780-783 4 p. 4484442

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Blasting
Microfluidics
Erosion
Nozzles
Powders
3 Citations (Scopus)

Microfluidic chip fabrication for silicon mold insert by micro hot embossing

Shih, Y. H., Shen, Y. K., Lin, Y., Lee, J. L., Lin, C. T., Lee, C. P. & Wu, M. W., 2008, 3rd IEEE International Conference on Nano/Micro Engineered and Molecular Systems, NEMS. p. 690-693 4 p. 4484423

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Microfluidics
Fabrication
Silicon
Molding
Taguchi methods
2007
2 Citations (Scopus)

Effect of porous oxide films on characterization and bioactivity of titanium niobium alloy by electrochemical treatments

Peng, P. W., Pan, Y. N., Shyng, Y. C., Chen, C. S. & Ou, K. L., 2007, ECS Transactions. 19 ed. Vol. 3. p. 27-36 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Niobium alloys
Bioactivity
Titanium alloys
Oxide films
Thick films